Sash adjustment
Simple adjustment without removing the sash — from 3 000 ₸ per sash, complex with removal — from 4 000 ₸.


Sash adjustment
Simple adjustment without removing the sash — from 3 000 ₸ per sash, complex with removal — from 4 000 ₸.

Hardware repair
Mechanism restoration — from 7 800 ₸ per job, hardware set replacement on sash — from 10 000 ₸.

Seal
We replace seals in windows of any manufacturer: KBE, Rehau, VEKA, Provedal and other systems.

Double glazing
Double glazing replacement with a 3-year warranty. Urgent production and replacement — in a short time.

Window handle
Handle replacement with installation — from 2 750 ₸ per unit. We'll match the colour and profile type.

5,097 reviews on review sites
PVC window repair means restoring individual units: hardware, seal, double glazing and pressure — without replacing the window itself.
A PVC window consists of a frame, sash, double glazing and hardware. The hardware holds the sash on hinges, presses it to the frame with cams and switches modes with scissors. When one of these units wears out, the window stops closing tightly or the sash sags.
Repair restores the window's functionality: we replace worn parts, adjust the pressure, renew the seal or install new double glazing. Warranty on window repair — 1 year for work and replaced components, for double glazing replacement — 3 years.

warranty on work and replaced components
hardware lubrication per sash
accepting requests in Temirtau daily
The technician arrives with tools and standard parts, inspects the window and fixes the fault on site.

The window's age, profile brand, and which mode is not working — so we can bring the right parts.
If access to the hinges or scissors is needed, the sash is carefully removed from its hinges and placed on a stand.
Worn parts are replaced, working ones are adjusted: hinges are tightened, cams and compression are set.
A set of hex keys, adjustment plates, hardware lubricant, a stock of standard cams and handles — and why this is enough for most breakdowns.
Below are typical faults of plastic windows and the work that fixes them.
Handle won't turn

The mechanism is stuck or clogged with dust. The technician restores the hardware's movement or replaces it on the sash.
Opened in two modes at once

The blocker or scissors are misaligned. The technician repairs the blocker and sets the scissors according to the diagram.
Hardware part

The scissors are responsible for the tilt-and-turn mode. The worn part is replaced with a compatible one.
Rubbing against the frame

The hinges have loosened or become loose. Hinge adjustment restores smooth movement without rubbing.
Blowing from the gaps

The compression has weakened or the seal is worn. The technician adjusts the compression and replaces the seal if necessary.
The cost of PVC window repair work is shown in the table below.
| Type of work | Price |
|---|---|
| Simple sash adjustmentwithout removing the sash | from 3 000₸ per sash |
| Complex adjustment with sash removalwith removal and reinstallation | from 4 000₸ per sash |
| Balcony door adjustmentdoor leaf | from 6 000₸ per unit |
| Hardware repairmechanism restoration | from 7 800₸ per job |
| Hardware replacement on sashsash hardware set | from 10 000₸ per sash |
| Replacement of scissors or corner switchhardware part | from 5 500₸ per unit |
| Replacement of cam or strike platelocking element | from 1 300₸ per unit |
| Hinge replacementsash support unit | from 4 750₸ per unit |
| Window handle replacementwith installation | from 2 750₸ per unit |
| Conversion to tilt-and-turn openingopening scheme change | from 19 000₸ per sash |
| Conversion of fixed window to openingsash installation | from 28 000₸ per sash |
| Installation of micro-lift or extra pressadditional hardware | from 1 700₸ per unit |
| Balcony latch installationon door | from 3 750₸ per unit |
| Unlocking a jammed sashwithout damaging hardware | from 2 400₸ per sash |
| Hardware cleaning and lubricationpreventive maintenance | from 1 250₸ per sash |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Call a technicianFacts about the service: warranty, working hours, payment and price fixing.
for work and replaced components
for double glazing replacement
for installation work
we work across Kazakhstan
we take requests every day
cash, card or Kaspi after installation
the price is fixed in the order
Seal replacement in windows of any manufacturer — KBE, Rehau, VEKA, Provedal, etc.
Four steps from request to window check

You write on WhatsApp — we reply within 5 minutes, clarify the address and symptoms.

The technician lists which parts will be touched, and you confirm the work before it starts — no disassembly 'just in case'.

Replaces parts or adjusts the sash on site, using compatible components.

Checks the sash movement and compression, gives recommendations on hardware care.
Good to know
Centre Okon handles PVC window repair in Temirtau with its own fitters, not through middlemen. We adjust hardware, replace seals on KBE, Rehau, VEKA and Provedal profiles, and swap glass units, often in a single visit. Measuring is free, you pay after the work, and repair carries a one-year warranty on labour and parts.
Most windows that feel broken are still repairable. The symptom tells you which part failed, and that decides whether a fitter adjusts, reseals or replaces a component.
A draught from under the sash usually means a worn seal or loose hardware, while condensation on the glass points to a failed glass unit or a cold bridge rather than the frame itself. A sash that scrapes the frame or will not close flush tells you the hinges have dropped or the profile has shifted, and the fix sits in the hardware, not in the whole window. Water pooling on the inner sill after a cold night is the clearest sign the sealed unit has lost its gas fill and needs replacing. Check the seal first by pressing a sheet of paper in the gap and pulling it out; if it slides free with no resistance, the seal is the likely culprit before any hardware is touched.
In most cases we repair the window rather than replace it, because a sash that sticks, leaks or fogs is usually one failed part, not a dead frame. We swap the seal, the glass unit or the hardware on its own, and the visit stays a single call-out. A frame that is still square and closes without force is worth repairing even after years of use; replacement only makes sense when the profile itself is cracked or the sash no longer sits true. Ask the fitter to show you the failed part before the work starts, so you see whether it is a strip of rubber, a hinge or the whole unit.
Repair is a set of separate jobs, and each one fixes a different fault. Here is what a fitter can adjust, reseal or swap without touching the rest of the window.
| What you notice | What we do | Part involved |
|---|---|---|
| Sash catches the frame | Adjust the hardware | Hinges and stays |
| Draught under the sash | Fit a new seal | Rubber gasket |
| Glass fogs inside | Swap the glass unit | Sealed unit |
| Handle turns loosely | Tighten or renew fittings | Handle and lock |
We change gaskets in windows of any manufacturer, including KBE, Rehau, VEKA and Provedal systems, and we repair units on loggias, in gazebos and on verandas as readily as in flats. Our pvc window repair temirtau service covers every window in the flat and the summer house in a single visit. The same specialist adjusts sashes on wooden and aluminium frames, on small vents and on full-height balcony doors, so a single visit can cover every window in the flat and the summer house. Hardware is matched to the groove rather than cut to fit, which is why we ask for the profile name when you book. A gasket matched to that groove lasts longer than a universal strip forced into place, so tell the fitter the name if you know it — it takes a minute and saves a second call-out.
The visit is short and predictable. You describe the fault, a measurer confirms it on site, and the fitter does the work, usually the same day.
You message us on WhatsApp and get a reply within five minutes, and the measurer then comes at a time that suits you to take sizes and confirm the fault, free of charge. The same specialist checks the sash travel, the seal groove and the glass unit, so the diagnosis happens where the window actually sits, not over the phone. Our team works seven days a week, which matters when a draught appears on a Sunday and you want it looked at before the working week starts. Have the window's approximate age and any profile name ready before the measurer arrives; it shortens the visit and helps match the right seal or fitting on the first try.
Most adjustments and seal replacements are finished in a single visit, and you pay only after the work is done, by cash, card or Kaspi. A sticking sash usually needs a hinge and lock-plate reset, which the fitter handles with the window in place, and a worn seal is swapped along the whole perimeter rather than patched at one corner. A glass unit swap can be arranged within one day when needed, so a foggy pane does not have to wait for a separate appointment. The price is fixed in the order after measuring, so the figure you agree at the door is the figure you settle once the sash closes cleanly again.
A repair is only as good as the promise behind it. Here is what our warranty covers, how payment works, and why a direct fitter differs from a listing service.
Repair work carries a one-year warranty that covers both the labour and the parts we replaced, and a new glass unit is covered for three years. If a sash is realigned or a seal is swapped, that fault is on us for twelve months; if a sealed unit is changed, the three-year term applies to the glass itself. Window installation, when a repair turns into a full swap, sits under a five-year warranty. Payment happens after the work is finished — cash, card or Kaspi — and the price is fixed in the order once measuring is done. Keep the order sheet naming the replaced part; it is what the warranty is checked against if the same fault returns.
We are a direct contractor with our own fitters, not an aggregator passing your request to strangers, so the person who measures is accountable for the repair. A listing service cannot tell you who will arrive; a direct fitter can name the team, the warranty and the payment terms before the visit. That matters when a seal fails in the first cold snap and you need the same hands back, not a new number from a call centre. In our practice the measuring visit is free and the fitter who takes the sizes is the one who returns to do the work. Ask who signs the order sheet — if the answer is vague, the warranty will be too.
Some jobs are worth doing yourself, and some are not. Safety fittings and a sash that has dropped out of line are best left to a fitter.
We fit window restrictors, blockers and locks chosen for your profile and floor, so a child cannot open the sash wide while the window still ventilates. The fitting is matched to the frame material — plastic, wood or aluminium — and to how the sash actually opens, whether it swings, tilts or does both. On a balcony or in a room with a low sill, the blocker limits the gap to a fixed opening and releases only with a key or a firm two-hand action. A restrictor that suits a ground-floor window may not suit a high floor, so the fitting is picked on site rather than bought off a shelf.
Cleaning a seal or tightening a handle is a fair home fix, but a sash that has dropped and catches the frame needs the hardware re-hung by a fitter. A wooden window swells and dries with the seasons, so its hinges drift out of line slowly; a plastic one usually drops after years of use or a knock. Once the sash scrapes the frame at the bottom corner, the hinge has already moved, and the fix is a realignment of the whole mechanism rather than one screw. Forcing a dropped sash back by hand often bends the hinge further, turning a quick adjustment into a parts replacement.
The short version of everything above: match the symptom to the part, confirm it on site, and get the terms in writing before anyone touches the frame.
Hardware, seal, adjustment, technician visit
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, an opening restrictor or lock is fitted to a working window without removing the sash. Fixings are matched to your profile hardware so the sash opens only to a safe angle.
If the rubber has hardened, cracked or no longer springs back when pressed, adjusting the pressure won't help — a new seal is needed. While the seal is still soft and intact, tightening the sash is usually enough.
We visit your home and repair windows from any manufacturer, including KBE, Rehau and VEKA. We provide a 1-year warranty on work and replaced components, and measuring and consultation are free.
If the sash catches the frame but the handle and locks work, adjusting the hinges and pressure is usually enough. Hardware replacement is needed when parts are worn or broken and tightening no longer holds.
Replacing the seal on one sash usually takes from half an hour to an hour, depending on the window and profile condition. The technician works while you are present and checks the pressure around the entire perimeter after installation.
Most often a worn seal or loose pressure is to blame, and this is solved by replacing the seal or adjusting. If draught comes along the edge of the double glazing or reveals, the cause may be installation or the double glazing itself — an inspection is needed.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp