Window with installation
Finished product and installation in one service — from 60 000 ₸ per m². Measuring is free, price is fixed after inspection.


Window with installation
Finished product and installation in one service — from 60 000 ₸ per m². Measuring is free, price is fixed after inspection.

Balcony unit
Set of window and balcony door — from 95 500 ₸ per piece. Suitable for access to a loggia or balcony.

Installation to GOST
Installation with vapour and waterproofing of the joint — from 5 200 ₸ per m². Protects against freezing and draughts.

Turnkey reveals
Reveal finishing set for one opening — from 15 000 ₸ per window. Completes installation and covers the joint.

Double glazing replacement
Urgent production and replacement — within one day at a surcharge to the double glazing price. 3-year warranty.

5,097 reviews on review sites
Installing a new window in the opening with removal of the old frame, fixing, joint insulation and reveal finishing.
Window unit installation is replacing the old frame with a new structure, sealed in the opening. The work includes removal, level installation of the frame, foam filling of the joint and external waterproofing. The quality of the joint determines whether the window will freeze in winter.
Standard installation to GOST includes three layers of joint protection: polyurethane foam, a vapour barrier tape inside and waterproofing outside. This scheme protects the insulation from moisture and extends the window's service life. The warranty on window installation is 5 years.

basic installation without additional joint insulation
installation to GOST with vapour and waterproofing
warranty on installation work
The fixing method depends on the wall material and opening type: anchors, mounting plates or a combined scheme.

The frame is fixed with anchors through the profile into the wall. Suitable for brick and concrete openings with even reveals.
Flexible plates fix the frame to the wall before foam filling. Used in wooden houses and for installation in a quarter.
Anchors on the sides and plates on top and bottom. Used for heavy structures and balcony units with a door.
If a seam freezes after someone else's installation, the frame is removed and reinstalled with insulation. Work — from 5 200 ₸ per m².
The profile and double glazing are chosen for the task: keep warmth in, reduce street noise, or let in more light.
White and coloured

Plastic profile with reinforcement. Suitable for flats and houses, no painting required.
Solid wood

Wooden frame for houses and buildings with historic architecture. Requires maintenance and painting.
Energy saving

Two glass units with an air chamber between them. Reduces heat loss and street noise.
Window and door

A set of window and balcony door for access to the loggia. Installed with reinforced fixings.
Urgent replacement

Urgent production and replacement of the glass unit within one day. At a surcharge to the unit price.
Prices for work and products are according to the price list; the exact amount is fixed after a free measuring visit.
| Type of work | Price |
|---|---|
| Installation of a PVC windowBasic installation without additional joint insulation | from 4 650₸ per m² |
| Window installation to GOSTWith vapour and waterproofing of the installation joint | from 5 200₸ per m² |
| Dismantling of the old windowTaking out the old frame and sashes before installation | from 1 800₸ per m² |
| Single-sash PVC windowFinished product without installation | from 42 500₸ per window |
| Double-sash PVC windowFinished product without installation | from 65 500₸ per window |
| PVC window with installationProduct and installation as one service | from 60 000₸ per m² |
| Balcony unit with doorSet of window and balcony door | from 95 500₸ per pcs |
| PVC windowsill installationCutting and fixing to the length of the opening | from 5 500₸ per linear m |
| Drip sill installationExternal drip sill fixed to the frame | from 3 250₸ per linear m |
| PVC reveals from sandwich panelsReveal cladding after window installation | from 4 700₸ per linear m |
| Reveals for a standard window, turnkeyReveal finishing set for one opening | from 15 000₸ per window |
| Sealing of external jointsSealing the joint outside around the perimeter | from 2 000₸ per linear m |
The price is fixed in the order after measuringMeasuring and consultation — freePayment after installation: cash, card or Kaspi
Book a measuring visitOwn production, selection of fixings for the profile and floor, made-to-measure manufacturing.
for window installation
we select fixings for the profile and floor
the measurer will come at a convenient time and take the measurements
cash, card or Kaspi
the price is fixed after measuring
we reply within 5 minutes
we accept requests every day
you can order in 17 cities of Kazakhstan
Four steps from enquiry to installation

You write on WhatsApp — we reply within 5 minutes. We confirm the address and a convenient time.

The measurer arrives at a convenient time, takes dimensions and helps choose the profile and glass unit.

The price is fixed in the order. We agree on the installation date and payment method.

We remove the old frame, install the new one to GOST, foam the seam and fix the reveals.
Good to know
We handle pvc window installation kostanay homeowners can book with a free measuring visit, our own installers and no middlemen. We fix the price after measuring, you pay only once the work is done, and every installation carries a 5-year warranty. Glass unit swaps are covered for 3 years.
Every job begins at your window, not in an office. A visit sets the sizes, the fixing method and the final scope, and only after that does the work get scheduled.
Measuring and consultation are free, and our measurer comes at a time that suits you, including weekends, because we are open seven days a week. On site the measurer reads the opening itself: wall material, floor level, the window profile and the floor the flat sits on. From that he chooses the fasteners — Z-shaped brackets, pins or magnets — and confirms the frame colour so it matches your windows. You get the design, mesh and fixing proposal in one conversation, and the price is fixed in the order after measuring. A measurer who also picks the fixings on the spot saves a second visit — the opening, floor level and window profile are read together, so the order is fixed in one go. This is how pvc window installation kostanay starts without guesswork: the sizes and fixings are settled before the crew arrives.
A turnkey job covers the frame, glass unit, slopes, window sill, water drain, foam sealing and final adjustment of the fittings, not just the window itself. The crew removes the old unit, prepares the opening, sets the new frame level and square, foams the gap, fits the sill with a slope away from the room and closes the joints with the drain outside. Fittings are adjusted last, so the sash closes evenly on the first try. Skipping the sill and drain is where most callbacks start — water has to leave the frame somewhere, so the drain is part of the job, not an add-on.
On site the job follows a fixed sequence, from taking out the old unit to the final check of the fittings. Here is what happens in the flat, how long it takes and how we keep rooms protected.
We take out the old unit, level the opening, set and fasten the new one, foam and seal the joint, fit slopes and sill, then adjust the fittings and check every sash. Demolition comes first, since the crew needs a clear opening to measure the true square. Preparation and levelling follow: packers and shims bring the base into line before the unit goes in. Fastening uses anchors chosen for the wall, then foaming and sealing close the perimeter in two passes. Slopes and sill go on last, and adjustment of the fittings finishes the job. Levelling the base before the unit goes in is what keeps sashes from sagging later — a window set on an uneven surface will drift out of square within a season.
We cover floors and furniture before demolition so dust stays contained. Our crews lay protective sheeting from the door to the aperture, seal the doorway with film, and keep the polyurethane foam and offcuts in one bag as they go. Old units come out in sections rather than one piece, which keeps the dust down and the doorway clear. Stripping and foaming are the two stages that produce the most debris, so both are timed for the same part of the day. Booking the measuring visit and the install day back to back shortens the stretch with an open aperture — an exposed wall loses heat fast, so the two visits are planned together.
The opening itself decides how a window is fixed and prepared. Panel block, brick, timber and aluminium each ask for a different approach, and the right one is settled at measuring.
| Wall type | Fixing | What we check |
|---|---|---|
| Panel block | Expanding anchors | Concrete grade, embedment depth |
| Brick | Plates and screws | Reveal squareness, mortar soundness |
| Timber | Pins into studs | Stud spacing, wood moisture |
| Aluminium | Self-tapping screws | Mullion thickness, thermal break |
We fit windows into plastic, timber and aluminium surrounds, including loggias, gazebos and verandas, and can set a new frame into an old surround without full demolition when the base is sound. In a timber house the surround keeps moving with the seasons, so the frame needs a gap allowance — a tight fit against green wood will bind the sashes by the first cold snap. An aluminium surround usually keeps its mullions, and the new frame is screwed to them rather than to the plaster. Old plasterboard reveals are cut back to solid masonry before anything is fixed. A timber surround needs a gap allowance, because a frame cut too tight against green wood will bind the sashes by the first cold snap.
A cold winter sets the requirements for profile chambers and for the glass unit itself, and the two are always chosen as a pair. Here is how the choice works and how winter installation runs.
| Parameter | What it gives | When to choose it |
|---|---|---|
| Multi-chamber PVC profile | Slower heat loss, quieter room | Most living rooms and bedrooms |
| Two-chamber glass unit | Main insulating barrier | Standard for a cold winter |
| Energy-saving glass unit | Reflects heat back inside | Rooms facing wind or north |
| Single-chamber unit | Light weight, thinner frame | Glazed balconies, utility rooms |
| Window fittings | Tight closing, winter ventilation mode | Every unit, checked at handover |
We install through the winter using cold-rated polyurethane foam and a fast opening-to-sealed sequence, so the room is never left open to the frost. The old sill and slopes can often stay if they are level and undamaged — the measurer checks them first and tells you honestly whether they will hold the new frame. Winter work is a scheduling question more than a technical one: the opening must not stay exposed overnight, so winter jobs are booked with the install day confirmed first. On the fitting side, we switch the hardware to winter ventilation mode at handover, which keeps the sash pressed tight against the seal until the thaw.
Warranty terms, settlement once the work is done and the signs of a direct installation crew are what separate a calm order from a risky one. Here is what to check before you sign.
Every installation carries a 5-year warranty, glass unit replacement is covered for 3 years, and we check sashes, seals and the sill line together with you at handover. The walk-through covers opening and closing each sash, the locking hardware, the seal compression all round the frame and the water drain slots at the bottom. We test the joint between frame and slope by running a hand along it and looking for gaps. A draught under the window board once fitting is complete usually points to the foam line or the drain slope, not the frame — catching it at handover is far cheaper than a return visit. Ask the team to show you the drain caps while they are still on site, because a blocked channel only shows up as damp plaster following the first heavy rain.
You settle the bill when the work is done, by cash, card or Kaspi, the price is fixed in the order once measuring is finished, and we reply on WhatsApp within 5 minutes, seven days a week. A direct installer measures, delivers and fits with its own fitters, so the person who reads your wall is the person who signs off the job. Ask who will actually be on site and who signs off the finished job. A quote given before anyone sees the opening is a guess — a fixed price only means something when the measurer has read the wall, floor and profile. We are open seven days a week, so a failed hinge or a slipped seal gets a response without waiting for a holiday backlog.
A PVC window job comes down to a handful of decisions that are easy to get right when they are made in the correct sequence, and easy to regret when they are rushed.
Window replacement, double glazing, fitting, removal
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, if the frame is intact, without cracks or distortions, and the hardware is working, replacing the double glazing is enough. This option works while the profile is in good condition, but if the profile is worn and there are draughts around the perimeter, it is better to replace the whole window.
If the frame has dried out, the sashes do not close tightly and there are large gaps around the perimeter, repair will only give a temporary effect. In such cases, it is better to replace the window with plastic: draughts disappear and heat is retained noticeably better.
Old frames and glass are usually removed together with the rubbish after dismantling, and this should be discussed with the fitter before work begins. If the frame is still sturdy, it is sometimes kept for household needs, but the glass requires careful disposal.
First, the measurer takes dimensions, then the fitter removes the old frame, prepares the opening, installs the new window and foams the seam. After fitting, the window sill and drip are attached, the reveals are insulated and finished, and finally the sashes and hardware are checked.
For the Kostanay climate, a double-chamber energy-saving double glazing is more sensible: it retains heat better and reduces condensation on the glass. The exact specification will be selected by the measurer, taking into account the orientation and the type of building.
In a panel building, anchor bolts through the frame are more common, while in a private house or on a wooden opening, mounting brackets are more convenient. The fitter chooses the specific scheme based on the wall material and the weight of the structure.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp