Main contour
A new EPDM seal closes gaps around the perimeter, and during a blizzard the window no longer lets cold in. From 1 000 ₸ per linear m.


Main contour
A new EPDM seal closes gaps around the perimeter, and during a blizzard the window no longer lets cold in. From 1 000 ₸ per linear m.

Premium seal
Stays flexible in severe frost and does not crack from temperature changes, great for the bedroom. From 1 200 ₸ per linear m.

Balcony door
A worn door contour lets cold along the floor. We install a new one all around — from 5 000 ₸ per item.

Brush seal
Flattened brush pile on aluminium sashes lets snow dust through. New one — from 1 150 ₸ per linear m.

Inter-frame
A third contour between sash and frame dampens street noise and cold from below. From 2 800 ₸ per window.

5,097 reviews on review sites
Sash and double glazing are fine, but there's a draught? The cause is almost always the seal that has lost its flexibility.
A window closes tightly only while the rubber is soft and pressed against the frame along its entire length. Hardened or cracked rubber leaves a gap through which cold, dust and street noise enter the apartment.
Steppe winds and blizzards in Kostanay quickly find such a gap. A technician will replace the seal to match your profile in one visit, then adjust the compression so the sash closes softly and tightly.

linear metre of new contour with labour
warranty on work and new components
we respond to requests in WhatsApp
Four problems people in Kostanay come to us with.

The seal does not yield to a finger and rings when tapped — it no longer works as a seal.
Cracks in the rubber eventually become gaps, and in winter cold comes through them.
A fallen section leaves a gap that lets wind through even with the handle closed.
A sheet of paper pulls out freely from a closed sash — meaning there is no compression.
For a child's room and bedroom, choose a premium seal and an inter-frame layer; for a balcony door, a wear-resistant contour.
standard PVC window

Reliable elastic rubber for most profiles, holds its shape in frost.
bedroom, child's room

German rubber stays flexible longer and dampens street noise better.
balcony door

Durable contour for a door that is opened many times every day.
sliding aluminium

Dense pile closes the gap at the runners against snow and dust.
windows to the street

A third layer of rubber dampens noise and stops cold air at the windowsill.
The total depends on the length of the contour and the type of rubber; the technician will give you the price before starting work.
| Type of work | Price |
|---|---|
| EPDM rubber seal replacementmain contour | from 1 000₸ per linear m |
| Premium rubber seal, Germanystays flexible longer | from 1 200₸ per linear m |
| Rubber seal for the whole windowsash and frame | from 3 500₸ per window |
| Balcony door contourall around | from 5 000₸ per item |
| Brush seal for aluminiumsliding sashes | from 1 150₸ per linear m |
| Contour cleaning and lubricationpreventive care | from 750₸ per linear m |
| Inter-frame contourquiet and warm | from 2 800₸ per window |
| Sash draught sealingwe find and seal | from 3 500₸ per sash |
| Compression adjustmentafter replacement | from 3 000₸ per sash |
| Liquid plastic for jointsframe corners | from 1 500₸ per linear m |
| Wooden window insulationSwedish method | from 4 200₸ per linear m |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Call a technicianKey facts about us.
on work and new seal
we replace seals in KBE, Rehau, VEKA, Provedal windows
the amount is fixed after inspection
work: cash, card or Kaspi
on WhatsApp, even on weekends
we visit any day of the week
time for accepting requests
we work across Kazakhstan
Everything takes one visit from a technician.

Message us on WhatsApp where it's draughty or noisy and attach a photo of the window — that makes it easier to choose the seal.

The technician checks the contours and hardware, identifies the profile and gives you the price before starting work.

We remove the old rubber, clean the grooves and install new seal around the entire perimeter, with no joints at the corners.

We adjust the pressure, test the sash with a sheet of paper, and only then do you pay.
Good to know
We handle window seal replacement in Kostanay with our own fitters, not through middlemen. We re-seal plastic, wooden and aluminium windows from any maker, including KBE, Rehau, VEKA and Provedal. Measuring is free, the price is fixed in the order after measuring, and every repair carries a 1-year warranty on labour and parts.
A draught past a tightly closed leaf almost always points to the seal contour, but before ordering a seal replacement in Kostanay it pays to separate worn rubber from a leaf that has simply dropped out of adjustment.
A worn gasket feels hard, cracked or flattened along the sash edge, while a hinge problem shows up as a sash that sags or rubs unevenly when you close it. Run a fingertip along the rubber at the handle side, the bottom edge and both corners: a healthy contour springs back at once, a spent one stays compressed and may leave a black mark on your finger. Then check the leaf itself — lift it slightly by the handle and watch whether the top corner drops or scrapes the frame. A leaf that catches at one corner while the rubber still feels soft is a hardware and adjustment issue, not a seal issue. Run a sheet of paper between sash and frame and pull it out at several points — if it slides out with no resistance at one spot, the seal there has lost its grip, not the hinge.
The seal is the flexible contour that presses against the frame when the sash closes, blocking draughts, dust and moisture at the joint. It works as a continuous spring: the rubber or silicone is compressed by the closing leaf and pushes back, so the joint stays airtight along its whole length. That spring weakens with age — ultraviolet light dries the surface, winter cold stiffens the compound, and repeated compression leaves a permanent flat spot at the corners where the sash presses hardest. Once the material stops recovering, the gap reopens by a fraction of a millimetre, and that is enough for cold air to travel through. Ice forming on the seal in winter is a sign the rubber has stiffened and no longer springs back, so the gap stays open even when the handle is turned fully.
Replacing a worn seal is not a full teardown — it is careful work along the sash contour. Below is what happens from your first message to the final check, and how long each stage takes.
We reply on WhatsApp within 5 minutes, the measurer arrives at a time that suits you and takes the sizes for free, and the fitter usually works on the opening leaf without removing the whole unit. The job starts with a look at the groove and the fittings, because a worn gasket and a dropped hinge often appear identical from the room side. Measuring and consultation cost nothing, and the measurer helps pick the seal, the fixings and the profile for your frame. Most tasks finish on the spot, with the leaf opening and closing again the same day. Ask the measurer to inspect the rubber along the sill edge too — that stretch is hidden and often wears out first.
| Scope of work | What the fitter does | Typical time |
|---|---|---|
| One sash | Old seal out, groove cleaned, new contour fitted | Short visit |
| Whole window | Every sash re-sealed, frame checked | Longer visit |
| Seal plus adjustment | Re-seal and fittings set so the sash closes evenly | Extended visit |
| Seal plus glass unit | Re-seal and pane swap if the glass is failing | Planned visit |
A seal is matched to the profile and unit type, not picked by eye from a shelf. The recess, the material and the age of the frame decide which contour will actually hold.
We replace the seal in windows of any maker, including KBE, Rehau, VEKA and Provedal, and the measurer picks the contour that matches the groove of your specific system. Rubber stays flexible in cold and suits most PVC units, while silicone handles heat and sunlight better on south-facing openings. Each maker has its own groove depth and width, so a gasket that seats snugly in a KBE unit can sit loose in a Rehau or Provedal one. The measurer checks the recess on site, matches the section to it and confirms the fit before the old one comes out. Width differs between systems, so a piece that fits one unit tightly can rattle in another — that is why the size is taken on site, not chosen from a catalogue.
We re-seal plastic, wooden and aluminium units, plus sashes on loggias, verandas and gazebos, and on an old unit the measurer tells you honestly whether a new seal will hold or the frame is past saving. Aluminium systems often use a slimmer groove than PVC, so the gasket there is thinner and the fitter checks that the leaf still closes without forcing. Wooden leaves move with the seasons, which is why the contour is set with a little tolerance rather than pressed in tight. On a very old timber frame the recess itself may be worn, so the fitter sometimes builds up the channel before fitting the new piece — otherwise it has nothing to grip. When the unit is too far gone, replacing the glass unit is the more sensible route, and we can produce and swap it within a single day for an extra charge.
How long a window seal lasts depends not only on the material it is made from but also on how it is treated between the seasons.
A quality seal on a well-kept window typically holds its elasticity for several seasons before it starts to harden and flatten. The flexible contour sits compressed against the leaf every time it closes, so it slowly loses its rebound rather than failing all at once. Silicone blends resist sunlight and temperature swings longer than basic synthetic compounds, which is why the composition matters as much as the fit. A gasket on the sunny elevation of a building ages faster than one in the shade, so it often makes sense to check and replace the strips on that elevation earlier. Run a finger along the surface in autumn — a profile that no longer springs back after you press it is already letting warm air through, even if the leaf still looks closed.
The terms around a repair matter as much as the repair itself. Here is what our cover includes, how payment works, and how to arrange a visit that suits your week.
Every repair we do carries a 1-year guarantee that covers both the labour and the parts we replaced, including the new seal. If a gasket we fitted starts letting draught through within that period, the return visit and the replacement material fall under the same terms. The cover follows the specific job recorded in your order, so it applies to the seal and fittings installed at your address rather than to the unit as a whole. We also give a 5-year guarantee on installation and a 3-year one on glass unit replacement, which matters when a seal job turns out to involve more than the gasket. For window seal replacement Kostanay customers can rely on the same terms recorded in the order. Keep the order slip after the visit — it records the price fixed at measuring and the terms, which makes any later claim straightforward.
You pay after the work is done, by cash, card or Kaspi, we are open seven days a week, and you book directly with our own fitters rather than through a middleman. A message on WhatsApp usually gets a reply within 5 minutes, and measuring plus consultation cost nothing — the measurer comes at a time that suits you, takes the sizes and helps pick the profile and fixings. Because the seal replacement Kostanay homeowners ask for is often a same-week job, weekend slots fill first; weekday visits are usually easier to arrange at short notice. Booking a weekday slot often means the measurer can spend longer on the diagnosis, which helps when you are unsure whether the seal or the hardware is the real cause.
A closed sash that still lets cold air through is a solvable problem, and the steps above show how to read the symptom, pick the right part and keep it working for years.
When to replace the seal, work timelines, warranty
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionThe rubber feels hard and doesn't spring back when squeezed. There are cracks along its length, delamination or a torn piece, and you can feel a draught around the sash perimeter.
Usually a technician can replace the seal on two or three standard windows in one visit. The exact number depends on the window sizes and the condition of the seals.
We use special sealant, a knife, and a tool to press the new seal into the groove. The materials are standard seals that match the window profile.
You can do just one sash if the other contours are still elastic and airtight. During the inspection, the technician will show you where the seal is worn and where it can still serve.
The new seal is denser than the old one, so the handle may require more effort at first. If the sash doesn't reach the frame, the pressure needs adjustment — tell the technician about it.
We provide a 1-year warranty for window repair and replaced components. If the seal starts letting air through during this time, we come and resolve it under warranty.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp