Adjustment
We eliminate sash sagging and rubbing against the frame, adjust the movement. Price from 3 000 ₸ per sash.


Adjustment
We eliminate sash sagging and rubbing against the frame, adjust the movement. Price from 3 000 ₸ per sash.

Hardware repair
We restore the operation of the opening and pressure mechanism. Price from 7 800 ₸ per job.

Handle replacement
We select a handle for your hardware and install it. Price from 2 750 ₸ per item.

Seal
We replace the seal in windows of any manufacturer, restore the pressure. Price from 1 250 ₸.

Balcony door
We adjust the pressure and movement of the balcony door, repair the mechanism. Price from 6 000 ₸ per item.

5,097 reviews on review sites
A sash consists of a profile, double glazing, hardware and a seal, and each of these units needs maintenance.
A plastic window is held by a profile with reinforcement inside, and the sash is moved by hardware and hinges. The pressure against the frame is provided by cams and striker plates, and tightness by the seal around the perimeter. When one of the units wears out, the window starts to catch, let in drafts or fail to close.
Repair is work with these units: adjustment of hinges and pressure, replacement of scissors, handles, cams, hinges and seal. The technician determines on site what can be adjusted and what requires part replacement.

simple sash adjustment
warranty on window repair
measuring and consultation
For each fault the technician has a set of actions: sometimes adjustment is enough, sometimes a unit needs replacement.

The cam is checked for play and worn edges: tightening helps only with a loose fastening, while a worn cam is replaced with a new one for the specific hardware.
The blocker and scissors are checked: the mechanism is restored so the sash stays in one opening mode.
The hardware scissors are replaced with new ones, then the smooth movement of the sash and the handle operation are checked.
The technician separately checks the corners, hinge side and glazing bead: each area has its own cause, so the fix differs — from tightening the seal to reinstalling the glazing bead.
A handle is selected to match the installed hardware and fitted, checking the turn and locking of the sash.
The seal and door movement are adjusted, the mechanism is repaired so the leaf closes without effort.
Main works and components with 'from' prices: the exact cost is given by the technician after inspecting the window.
Sash · hinges · seal

We eliminate sagging and friction of the sash, adjust movement and seal around the perimeter.
Sash · full set

We replace the worn hardware set on the sash, restore opening.
Piece · for hardware

We select and fit a handle that suits your opening mechanism.
Contour · any manufacturer

We replace the seal in windows from KBE, Rehau, VEKA, Provedal and other manufacturers.
Piece · opening mechanism

We replace hardware scissors and hinges when the mechanism breaks or the sash has play.
Price list for main works with unit and calculation notes.
| Type of work | Price |
|---|---|
| Simple sash adjustmentfixing sagging and rubbing | from 3 000₸ per sash |
| Complex adjustment with sash removalwith removal and rehanging of the sash | from 4 000₸ per sash |
| Balcony door adjustmentsetting the seal pressure and door movement | from 6 000₸ per item |
| Hardware repairrestoring the mechanism operation | from 7 800₸ per job |
| Hardware replacement on sashinstalling a new set | from 10 000₸ per sash |
| Replacement of scissors or corner switchwhen the opening mechanism breaks | from 5 500₸ per item |
| Replacement of cam or striker platerestoring the seal pressure | from 1 300₸ per item |
| Replacement of hingeswhen worn or loose | from 4 750₸ per item |
| Window handle replacementwith matching to the hardware | from 2 750₸ per item |
| Conversion to tilt-and-turn openingchanging the opening scheme | from 19 000₸ per sash |
| Conversion of fixed window to openinginstallation of an opening sash | from 28 000₸ per sash |
| Installation of micro-lift or extra sealadditional hardware | from 1 700₸ per item |
| Installation of balcony latchon the balcony door | from 3 750₸ per item |
| Opening a blocked sashif the sash is jammed | from 2 400₸ per sash |
| Cleaning and lubrication of hardwareprevention of jamming | from 1 250₸ per sash |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi
Calculate the costFacts about the company that matter when choosing a window repair technician.
for works and replaced components
for window installation
the measurer will come at a convenient time
we work daily
cash, card or Kaspi
the price is fixed after measuring
KBE, Rehau, VEKA, Provedal, etc.
we reply within 5 minutes
Four steps from request to checking the window after repair.

You leave a request on WhatsApp — we reply within 5 minutes and clarify what happened to the window.

The technician inspects the window, agrees the list of works with you and fixes the cost before starting.

The technician performs adjustment or replaces components, using parts for your hardware.

You check the movement of the sash and the seal, the technician shows how the window works after repair.
Good to know
Centre Okon handles PVC window repair in Kostanay with its own fitters, not through an agency. We fix draughts, sagging sashes and worn seals on windows from any maker, replace glass units and fit window restrictors. Measuring and consultation are free, the price is fixed after measuring, and you pay once the work is done.
Repair is almost always the cheaper and faster route than a new construction. The decision rests on the state of the frame, the moving parts and the glazing, never on the age of the window.
Replacement is the honest answer when the profile is cracked, the reinforcement is corroded or the geometry is bent beyond adjustment. A leaf that has dropped so far that the hinges no longer reach the striker plate, or a corner with a split weld, cannot be brought back by fresh seals and screws. The same applies when several sashes in one room have failed at once and the structure itself has lost its shape. A fitter should show you the damaged spot before recommending a new window, because a repair quote that hides a structural fault only postpones the cost. Ask to see the crack or the corrosion with your own eyes — a photo on the phone is enough.
A draught or a sash that drags almost always points to one specific component, not the whole window. A fitter identifies that component on site before changing anything.
A draught along the whole perimeter usually means a worn seal, while a draught at one corner points to hardware that has lost its pressure. On a PVC window the rubber strip compresses over time and the moving panel no longer sits tight against the frame; the fittings that pull it in can also loosen after years of opening and closing. The two faults look similar from inside the room but need different work. Run a hand along the rubber on a cold day: if it feels hard or leaves a gap when you press the panel in, that strip is the first thing to change, not the fittings. We replace seals on windows of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles. For pvc window repair in Kostanay, the fitter checks the seal and hardware together so the right part is replaced.
A sash that scrapes the frame at the bottom has dropped on its hinges, and in most cases we bring it back with an adjustment rather than new parts. Do not force a dropped panel shut, because the extra pressure bends the hinge arms and turns a quick adjustment into a hardware replacement. The fitter lifts the leaf back onto its hinges, sets the height and checks that it closes against the seal without rubbing. Most dropped sashes are corrected in one visit, and the window then closes quietly for years. If the same sash drops again within a season, the hinge set itself is worn and gets renewed rather than adjusted a second time.
Every pvc window repair starts with a free measuring and diagnostic visit that covers the whole job, and most jobs are closed in a single trip because the fitter arrives with the parts likely needed.
Seal replacement and hardware adjustment are done in a single visit, while a made-to-order glass unit is fitted on the day it is ready. Most calls in Kostanay end with the sash closing quietly the same afternoon: the old gasket comes out, the new one is pressed into the groove, the hinges are adjusted and the handle is checked against the strike plate. A cracked or misted pane is a different story, because the glass is assembled to the frame sizes taken on site. A standard panel is usually ready for a return visit, and if the window cannot wait we can produce and fit it within one day for an extra charge on the glass unit, as agreed when the order is placed.
Every part of a PVC window wears on its own schedule, and a fresh fitting is not always the answer where an adjustment or a seasonal habit would do the job.
We replace the seal on windows from any maker, including KBE, Rehau, VEKA and Provedal profiles, and match the rubber to the groove of your sash. Sunlight and repeated compression harden the strip, so it stops springing back and leaves a thin gap along the closing edge. A fitter checks the groove width and the profile series before cutting, because a generic strip pressed into the wrong channel leaves the same draught it was meant to stop. We change a hardened gasket before the first frost rather than after, since a brittle one lets cold air in all winter. A strip that has already cracked at the corner is cut out and replaced along the full perimeter, because a patch on one edge never seals the closing line.
| Component | Sign of wear | What we do |
|---|---|---|
| Fittings | Handle turns loosely, the leaf drags | Adjust the cams and hinges |
| Locking points | The leaf pulls away at a corner | Renew the worn mechanism |
| Glazing | Fog between the panes | Fit a new unit into the existing opening |
| Hinges | Squeak, sag, visible play | Re-set or renew the hinge set |
| Seal | Hardened strip, draught at the edge | Swap the rubber to the groove |
A restrictor or lock is matched to the window profile and the floor it sits on, never bought at random, because the hardware holds only on the specific geometry of the sash.
The measurer picks the fixing to match your window profile and the floor you live on, choosing between Z-brackets, pins or magnets. A Z-bracket slips behind the frame edge and grips the reinforcement, pins seat into the profile wall at a set depth, and magnets hold a light screen flush where drilling is unwanted. On an upper floor the wind load on a sash is higher, so the fixing has to bite the steel inside the profile, not just the plastic skin, or it will work loose over a season. Ask the measurer to show you where that steel runs before any hole is drilled.
A last pass through the basics helps you describe the fault clearly and avoid paying for work your window does not need.
Repair or replacement, draughts, seal, hardware and warranty
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionMost often, an old window can be repaired: it is enough to replace the seal or adjust the hardware. A new window is needed if the frame is cracked or the sash geometry is irreversibly distorted.
A worn seal lets cold air through along the sash perimeter, while a depressurized glass unit shows moisture between the panes. If you are unsure, the technician will identify the cause during inspection.
If the seal has become hard, cracked, or lost its elasticity, it's time to replace it. The window itself is usually still serviceable: replacing the seal restores airtightness without buying a new window.
Don't force it: you could break the hardware. Usually, replacing the handle or adjusting the sash helps. Call a technician; they will identify the cause and fix it.
If there is moisture between the panes, the double glazing unit is depressurized and cannot be repaired. The double glazing unit needs to be replaced; the frame itself does not need to be changed. Condensation on the room-side glass is more often related to pressure or ventilation.
Yes, we provide a 1-year warranty on work and replaced components. If a problem related to the repair occurs during this period, we will fix it.
We replace seals in windows of any manufacturer, including KBE, Rehau, VEKA, and Provedal. We will select the appropriate material for your profile and design to restore the pressure.
After winter, adjustment is usually sufficient: the sash settles on its hinges and the pressure weakens. Hardware replacement is needed if the cams or mechanism are worn or broken. The technician will determine what is required during inspection.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp