Craftsman with a metal window grille in the kitchen
from 7 500 ₸ per m²Free measuring, installation matched to the wall typeCalculate

Metal Window Grilles in Kostanay

Standard pattern · welded

Welded grille

Basic protection for first-floor windows. Price from 7 500 ₸ per m², installation is calculated separately.

Welded metal window grille
GoogleYandex MapsZoon

5,097 reviews on review sites

What metal window grilles in Kostanay are

A frame made of steel profile, rods and crossbars, fixed to the opening with anchors or embedded parts.

How it is built

A metal window grille is a welded or forged frame made of steel profile with rods and crossbars. The cell size is set by the pattern: standard rod spacing or a decorative design. The finished structure is fixed to the wall or embedded parts in the opening.

The price depends on the type and area: standard welded — from 7 500 ₸ per m², forged — from 26 000 ₸ per m². Installation is calculated separately — from 4 500 ₸ per m². Painting and extra charges for a leaf or lock are added to the main structure.

Metal grille outside a window, vertical bars and wall fixings
from 7 500 ₸

price per m² of a standard welded grille

from 4 500 ₸

installation per m², fixings selected by wall type

from 5 500 ₸

powder coating per m² in a colour to match the windows

5 types
WeldedForgedBulgedLaser cutAccordion

How a security grille is fixed to the opening in Kostanay

The fixing method is chosen based on the wall material, floor and the need for window access.

Grille fixed with anchors in the window opening
  • 01Anchors into the wall

    The main method for concrete and brick: the grille is anchored to the facade. Suitable for fixed structures on the first floor.

  • 02Embedded parts in the opening

    Embedded anchors are installed in the opening, and the grille frame is fixed to them. This option is convenient when the wall is thin or the finish does not allow drilling into the facade.

  • 03Removable on anchors

    The structure is held on anchors but can be removed if needed. Ask the technician about the surcharge to the main grille during the measuring visit.

  • 04Hinged leaf with lock

    Part of the grille opens on hinges; the lock is added separately. Ask the technician about the cost of the leaf and lock installation during the measuring visit.

Metal window grille prices in Kostanay

The table lists the types of structures and work covered on this page.

Type of itemPrice
Welded grille, standard patternbasic versionfrom 7 500₸ per m²
Forged grilledecorative elementsfrom 26 000₸ per m²
Bulged convex grilleprotrudes beyond the window planefrom 26 500₸ per m²
Decorative grille, laser cutcustom patternfrom 25 000₸ per m²
Sliding accordion grillefolds to the sidefrom 28 000₸ per m²
Hinged grille leafextra charge to the main structurefrom 15 000₸ per leaf
Removable grille on anchorscan be removed if neededfrom 16 500₸ per m²
Fire escape hatch in the grilleemergency exitfrom 15 000₸ per item
Lock installation in the grillepadlock or mortise lockfrom 5 000₸ per item
Powder coating of the grillecolour to match the windowsfrom 5 500₸ per m²
Grille installationfixings matched to the wall typefrom 4 500₸ per m²
Grille repair, welding and straighteningrestoring the geometryfrom 6 000₸ per job
Removal of the old grillebefore installing a new onefrom 4 000₸ per item

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Check the price

Why customers order protective grilles from us in Kostanay

Facts about the company's work that matter before ordering.

Measuringfree

The measurer will come at a convenient time and take measurements.

Pricefixed

The cost is fixed in the order after measuring.

Paymentafter

Cash, card or Kaspi after installation.

Warranty1 year

For work and replaced components.

Coverage17 cities

You can order in 17 cities of Kazakhstan.

Scheduleno days off

We work without days off.

Price fixationin the order

The price is fixed after measuring.

Response5 minutes

We reply on WhatsApp within 5 minutes.

How we make and install metal window grilles in Kostanay

Four steps from request to finished structure.

  1. A hand holds a phone with a dark screen by a window before measuring for a grille
    01at a convenient time

    Request

    You leave a request, discuss the task and grille type. Consultation is free.

  2. A tape measure measures the opening of a white window for a metal grille
    02at a convenient time

    Measuring

    The measurer arrives, takes the opening dimensions and helps choose the structure and fixings.

  3. A finished welded grille stands by the workshop wall, gloves beside it
    03depending on design

    Manufacturing

    The grille is made to the measured dimensions. Production time is specified in the order.

  4. A finished dark grey grille is installed outside a white window metal grille
    04after completion

    Installation

    The structure is fixed to the opening, the leaf opening and lock operation are checked.

Good to know

Metal Window Grilles in Kostanay Fitted to Your Window and Your Task

We make metal window grilles in Kostanay to your exact size and fit them with a free measuring visit. The measurer checks your window profile and floor, then picks the fixing that suits the wall, and we paint the frame to match your windows. You pay only after installation.

Which Metal Window Grilles Fit Your Window, Floor and Task

The unit is chosen for a specific job — keeping a child safe, blocking a break-in, preserving the look of the facade — and for a specific window: profile type, floor, place of fitting. Below we break down the options.

Grille Types and What Each One Is For

  • Welded grille: the basic strong option, steel bars welded into a rigid frame that carries load on ground-floor and entry windows.
  • Forged grille: steel shaped into decorative work, chosen when the facade matters and the barrier should read as part of the building.
  • Clear grille: thin bars set close together so the outline almost disappears from the street while the room keeps its light.
  • Polycarbonate insert: a transparent sheet set behind the bars, useful where you want a solid barrier without a heavy industrial look.

Matching the Grille to the Window and the Room

We fit them on plastic, wooden and aluminium windows, and also on loggia windows, gazebo and veranda openings, choosing the drawing around the task and the look of the facade. For a ground floor or a window facing the street, the useful answer is not a blind outline but a balance of strength and view — an over-dense barrier cuts daylight and the view from inside more than buyers expect at the selection stage. On upper floors the load is lighter and the outline can stay open. Metal window grilles in Kostanay are selected the same way, with the drawing matched to the window in front of you. A practical note from our measuring visits: decide the drawing with the window in front of you, not from a photo — the same shape reads differently on a wide loggia opening and a narrow kitchen one.

Child Safety and Break-In Protection With Metal Window Grilles

The barrier carries two very different jobs — keeping a child from falling out and keeping a stranger from getting in. The solutions behind each job differ, and mixing them up costs both safety and money.

Grilles That Stop a Child From Falling Out

A child-safety barrier closes the gap of the opening sash that a child can squeeze through, so it goes on the opening leaf, not only on the fixed pane. The pattern sits outside the glass and blocks the full swing path, which matters on upper floors of panel blocks and on loggia windows that stay open for hours in summer. Spacing decides the job: a child cannot pass a gap narrower than the head, so the layout is drawn around the leaf width rather than the pane. Bars alone do not replace a window restrictor — the screen holds from the outside, while the restrictor stops the sash from swinging wider than safe, and on windows opened daily the two work best together.

Anti-Burglary Grilles and How They Differ

  • Anti-burglary grille: heavy bars and deep anchors resist force and close the window as an entry point on low floors.
  • Window restrictor: limits how far the sash swings and protects against falls, yet leaves the glass exposed.
  • Lock blocker: stops the handle from turning and blocks opening from outside, but not a smashed pane.
  • Combined setup: a restrictor plus a grille covers the fall risk and the break-in route on one leaf.

How Metal Window Grilles Are Measured and Fixed Without Damaging the Window

Size and fixings decide whether the unit sits level and whether your window survives the job. Here is how measuring works and what drives the choice of fastener.

Free Measuring and Why You Should Not Skip It

Measuring and consultation are free with us: the measurer comes at a time that suits you, takes the sizes and helps you choose the design, the mesh and the fixings. He works from the actual opening, the reveal and the frame profile rather than from your own tape measurement. A self-measured opening often lands a few millimetres off on an uneven wall or a sloped reveal, and the unit is made to size, so that gap shows up the moment it goes on. The measurer also checks which way the sash opens and how far it swings, because a barrier that ignores the swing will block the window later. Once the sizes are confirmed, the price is fixed in the order, so nothing shifts after the fact.

Fixings for Brick, Panel and Different Window Profiles

Fastener types matched to wall and window profile
FastenerBest forWhat it gives you
Z-bracketsBrick and solid wallsRigid hold, frame sits off the reveal
Pins (plungers)Panel houses, thin profilesQuick release, minimal drilling
MagnetsLight frames, easy accessTool-free removal for cleaning

Do You Need Permission and How Installation Works

Our own fitters carry out the installation, with no subcontractors on site, and they bring the fasteners chosen at measuring. On permission for a grille on the facade, check the rules of your building or residential complex first — requirements differ from house to house, and some ask for a standard pattern or a colour match. The job itself is quick: the frame is set, the fixing points are drilled, and the structure is levelled and locked in place. If a barrier is already fitted but stops the window from opening, it can be reworked or its fasteners swapped — that is settled on site, and a whole new unit is not always needed. Ask the fitter to show you the release action before he leaves, so winter removal from inside stays a one-minute job.

Combining Metal Window Grilles With a Mosquito Net on One Window

A grille and a mosquito net solve different problems, yet on one window they have to share the same opening. Here is how the two fit together and what to decide before either is made.

How a Grille and a Mosquito Net Work Together

We fit window grilles and a mosquito net on the same window by layering them: the net sits close to the sash, the grille stays outside, and neither blocks the other. The screen frame is painted to match your window, so from indoors the two read as one unit. A framed screen made to your size takes 10–15 minutes to produce, a pleated one 40–60 minutes, so both parts can be planned in a single visit. The order matters: if the grille goes up first and you add a net later, the fixings must be matched to space already taken, so plan both elements at once.

Grille and Net Options That Match Your Windows

Mesh types paired with a grille on one window
CanvasFeatureBest for
Standard (Fiberglass)Fire-resistant, tolerates temperature swingsEveryday windows
UltraVue25% more light and airDark rooms
Anti-Cat (Pet Screen)Vinyl threads hold a small animal's weightHomes with cats
Anti-Pollen (Poll-Tex)0.25×1 mm cellAllergy season
KryloReinforced weaveHigh-traffic doors

Coating, Care and How Long Window Grilles Last in Kostanay

Metal lasts for decades when it is protected and maintained. Below we cover the finish that holds up to local winters and heat, the routine care a grille needs, and what our warranty actually covers.

Paint, Anti-Corrosion and Matching Your Windows

We paint the frames any colour to match your windows, and anti-corrosion treatment matters most in a climate with sharp frosts and hot summers, because it keeps rust from starting under the finish. Powder coating goes on as a dry layer and cures hard, so it resists chipping better than liquid paint on a steel bar. Matching the colour to the window profile keeps the facade tidy and hides the fixings that hold the unit in place. For street-facing windows we usually suggest a shade close to the window rather than a contrasting one. A dark frame on a sun-facing wall heats up more in summer and fades faster than a light one, so pick the colour with the facade and the sun in mind, not just the window.

Care, Service Life and What the Warranty Covers

  • Inspection: check bars and frame twice a year for chips, loose fixings and rust spots at weld points.
  • Touch-up: repaint small chips as soon as you spot them, before moisture reaches bare metal.
  • Cleaning: wipe with a damp cloth and mild soap, then dry so water does not sit on the finish.
  • Fixings: tighten or replace brackets, pins or magnets that work loose over the seasons.
  • Warranty: we repair the units and replace fixings after installation, and the warranty covers that work.
  • Rust watch: a small chip is where corrosion starts, so touching up early costs less than treating spread.

What to check before ordering a window grille

The right choice comes down to matching the product to the actual job, the window profile and the exposure of the flat.

  • Start from the task: a child-safety barrier, an anti-burglary pattern and a decorative facade unit are built differently, so name the purpose first.
  • Measuring decides the fixing: the window profile and the floor determine whether Z-brackets, pins or magnets are used, and a free visit settles that on site.
  • One opening fits both: a barrier and a mosquito net share the same window when frame and fixings are planned together.
  • Coating sets the service life: paint and anti-corrosion treatment decide how the unit handles winter and summer temperature swings on the steppe side.
  • Touch up chips early: a bare spot repainted at once stops corrosion spreading under the coating.

Questions about metal window grilles in Kostanay

Burglary protection, child safety, custom measuring, forging and welding

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Which metal grille should I install on a first-floor window in Kostanay to protect against burglary without ruining the look?

For a first floor, a welded or forged grille with a hinged leaf and lock works well: it resists break-ins and looks neat. The measuring specialist will match the pattern and colour to the facade, and the fixings to your profile and floor.

02Which is more reliable for a child near an open window, a metal grille or a window restrictor?

A grille physically prevents falling out, while a restrictor only stops the sash from opening beyond a set angle. For windows where a child is alone, a grille is more reliable; a restrictor is a good addition but not a replacement.

03What do reviews say about grilles on plastic windows?

Reviews most often discuss how the grille is fixed and whether it interferes with opening the plastic window. That is why during the free measuring visit the specialist checks the profile and selects fixings so the sash opens freely.

04How does a forged metal grille differ from a welded one, and which is stronger for a window?

A forged grille is assembled from bent decorative elements, while a welded one is made from rods with a standard pattern. In terms of strength, both handle window protection, and the choice depends on budget and how important the facade appearance is.

Reviews of metal window grilles in Kostanay

5,0based on 97 reviews on platforms
All reviews