Craftsman holding a roll of weatherstrip for window insulation in the children's room
from 1 000 ₸ per linear metreGetting windows ready for a blizzard: we close gaps in sashes, seams and window sills in one visit.Calculate

Window Insulation in Kostanay

Blizzard · Draught

Seal and compression

New seal and winter sash mode keep the wind out of the room. From 1 000 ₸ per linear metre.

Technician holds a coil of grey rubber seal, explaining seal replacement
GoogleYandex MapsZoon

5,097 reviews on review sites

What is window insulation in Kostanay

Even a window from the early 2000s doesn't need replacing if the frame is intact. It's enough to close all the places where heat escapes.

What we do

The technician looks for heat leaks around the sash perimeter, on the seam around the frame, on the reveal and under the window sill. Then he replaces the seal, sets winter compression, seals the seams and, if needed, insulates the reveal and window sill.

Steppe blizzards and frosts in Kostanay quickly find the weak spots of a window, especially in country houses and on high floors. After insulation you can sit by the window even in a snowstorm.

White PVC window with the sash closed tight and smooth reveals, snow-covered birches behind the glass
from 3 800 ₸

full service for one window

1 year

warranty on repair and parts

5 minutes

we reply on WhatsApp to your request

Places
SashSeamRevealWindow sillGlass

How warm window repair is performed in Kostanay

Four problems we find most often.

A hand presses a new grey seal into the groove of a white window sash
  • 01Draught in a blizzard

    Old seal and weak compression let wind through around the sash perimeter.

  • 02Dark seam

    The foam around the frame is frozen and wet, the wall next to the window is cold.

  • 03Mould on the reveal

    The cold reveal collects moisture, dark spots appear in the corner.

  • 04Gap by the radiator

    Cold air comes from under the window sill straight onto the radiator.

Types of warmth works for Kostanay windows

We do only what your window really needs.

Seal

PVC sashes

Technician holds a coil of grey rubber seal, explaining seal replacement

New seal and winter compression mode.

from 1 000 ₸/linear m

Internal seam

at the frame

A craftsman holds a tube of white sealant in his hand showing seam sealing

Liquid plastic protects the foam from moisture.

from 1 500 ₸/linear m

External seam

from the street side

A craftsman holds an L-shaped steel hex key in his hand showing sash adjustment

Sealant protects the seam from wind and snow.

from 2 000 ₸/linear m

Reveal

cold corner

A craftsman holds a sheet of white insulation in his hand explaining slope insulation

Insulation and finish without cold bridges.

from 19 900 ₸/linear m

Window sill

gap below

Technician holding a can of mounting foam by the window before foaming the joint under the windowsill

Foam filling and sealing.

from 15 000 ₸

Window insulation prices in Kostanay

The cost depends on which parts of the window need closing; the technician will give you the price on site.

Type of workPrice
Full service for one windowseal, seams, compressionfrom 3 800₸ per window
EPDM sealnew sealfrom 1 000₸ per linear metre
Sash draughtclosing the gapfrom 3 500₸ per sash
Internal seamliquid plasticfrom 1 500₸ per linear metre
External seamsealantfrom 2 000₸ per linear metre
Insulated revealwith new finishfrom 19 900₸ per linear metre
Window sillfoam fillingfrom 15 000₸ per job
Swedish methodwooden framesfrom 4 200₸ per linear metre
Extra compressionor micro-liftfrom 1 700₸ per item
Between framesplus contourfrom 2 800₸ per window
Thermal camerafinding cold spotsfrom 9 000₸ per job
Balcony insideinsulationfrom 6 800₸ per m²

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Call a technician

Why customers order warm window works from us in Kostanay

Key facts about our work.

Warranty1 year

on work and new parts

Profilesany

KBE, Rehau, VEKA, Provedal and others

Pricein the order

the amount is fixed after inspection

Paymentafter

work: cash, card, Kaspi

Response5 minutes

on WhatsApp with a photo of the window

Scheduleno days off

we visit every day

Hours09:00–19:00

time for accepting requests

Experiencesince 2012

we work across Kazakhstan

How window insulation is carried out in Kostanay

Four steps to a warm window.

  1. A hand holds a smartphone with a dark screen near a white window
    015 minutes

    Request

    Write on WhatsApp where it is cold near the window and send a photo of the sash, seam or reveal.

  2. A tape measure is stretched across the opening of a white plastic window a hand holds the tape
    02at a convenient time

    Inspection

    The technician looks for heat leaks and gives the cost of work before starting.

  3. Hands holding a coil of new grey window seal above a workbench, a caulking gun lying next to it
    03one visit

    Repair

    We replace the rubber seal, set winter pressure, and seal seams and gaps under the windowsill.

  4. A finished white window with a new seal and an insulated slope
    04in your presence

    Check

    We check the window for drafts together with you, and after that you pay.

Good to know

Window Insulation in Kostanay with a Free Measuring Visit

We handle window insulation in Kostanay as a direct contractor with our own craftsmen. We find where the cold gets in, replace the seal on windows of any brand, adjust the sashes and seal the slopes. Measuring is free, you pay after installation, and repair work carries a one-year warranty.

Why Window Insulation Still Feels Cold with a Shut Window

Warm air rarely escapes through a window as a whole; it leaves through specific points: the seal, the rebate, the frame joint, the glass unit. Locate the source first.

Three Signs That Point to the Seal, the Sash or the Glass

  • Draught along the handle side: a worn seal or loose sash, often needing adjustment rather than parts.
  • Ice inside the glass unit: frost between panes means the sealed chamber has failed; frame insulation will not solve it.
  • Damp slope or corner: moisture on the reveal points to an open joint behind the frame, not the glazing.
  • Whistling in strong wind: air through a narrow gap signals a compressed seal or shifted frame.
  • Cold glass surface: a cold pane with a warm frame means the glazing, not the fittings.

A Five-Minute Check You Can Do Yourself

Close the window, hold a thin paper strip or a lit candle near each edge, and watch where it moves — that edge is where the cold enters. Work along the handle side first, then the hinge side, then the bottom corner of the frame, since those spots lose heat most often and are easiest to miss by eye. On a windy day the test reads more clearly. Pinch the seal where the paper slips through — a seal that feels hard, flat or crumbly has lost its spring and no longer fills the gap. The same pass shows whether the joint behind the frame is tight. One sheet of paper and five minutes tell you more than a hand held to the glass.

Why the Cold Comes Back After a Quick Fix

A draught returning within weeks usually means the cause was misread — a seal was changed while the sash stayed crooked, or frame joints were left open behind the slope. Replacing rubber on a sash that no longer closes evenly presses the new seal against one corner and leaves a gap at the opposite one, so the leak moves. Condensation shifting from the glass to the slope after a repair is a warning, not progress: the warm, moist air has found a colder surface, and mould follows within a season. In our experience the order matters more than the material — align the sash, close the joints, then renew the seal, and the fix holds through winter.

What Window Insulation Actually Covers

Insulation is not a single rubber strip but a set of jobs matched to one specific unit, and here is what the work involves and its order.

The Steps We Follow on a Standard Window

  • Sash adjustment: we align the leaves to press evenly against the opening before new material goes in.
  • Gasket replacement: the worn strip comes out and a fresh one runs the full perimeter.
  • Joint sealing: we close gaps where the profile meets the wall, since cold air slips past.
  • Slope insulation: slopes and sill line get insulated where moisture collects on frosty mornings.
  • Final check: the measurer opens each leaf and confirms the rubber sits flush, with no crushed spots.

How Insulation Differs from Just Swapping the Rubber

Each job and the problem it solves
WorkWhat it fixes
New gasketDraughts along the opening
Hinge adjustmentSags and corner gaps
Joint sealingCold creeping in behind the profile
Slope and sill insulationCondensation and damp patches
Glass unit checkFogging between the panes

Window Insulation Repair, Reglaze or Replace the Whole Window

Insulation solves most cases, but not all. Here is how to tell when window work is enough, when fresh glazing is needed, and when replacement is the honest answer.

When Insulation Is Enough and When the Glass Unit Has to Go

If the glass itself is clear and dry, insulation without a new unit is usually enough; if ice forms inside the panes or the spacer has failed, the glazing has to be replaced. We look at the glass first, not the sash: condensation on the room side points to a warm-air problem, while mist trapped between the sheets means the spacer and its seal are gone. A failed unit shows a hazy film inside that no cleaning removes. Where the glass is sound, we renew the seal, adjust the hardware and close the draughts. A unit that has lost the bond between its panes is exactly where sealing the frame stops helping. For window insulation in Kostanay, the glass decides the route.

The Point Where a New Window Beats More Repairs

  • Warped frame: a twisted profile stops the sash sitting flush, so fresh rubber compresses unevenly and leaks within a season.
  • Cracked profile: splits or broken corner welds let cold air past any gasket, however well fitted.
  • Tired hardware: handles, hinges and locking points that no longer pull the sash tight stop even closing against new rubber.
  • Decades-old assembly: a unit patched several times costs more across winters than one clean replacement.

A Simple Way to Compare the Two Routes

Three routes compared by what each one repairs
RouteWhat it fixesWhen it fits
Insulation and repairGaskets, hardware, draughtsSound frame, clear glass
Glass unit replacementThe glazing itselfMist or ice between panes
Full window replacementFrame, glazing, fittingsWarped or cracked profile

Plastic, Wood and Aluminium Windows Need Different Work

The right method depends on the frame material and on the condition of the gasket. Three frame types, three different approaches to the same cold-window problem.

Wooden Windows That Can Be Insulated Without a New Frame

A sound wooden frame can be insulated in place — we renew the gasket, close the gaps at the joints and treat the timber, so the unit keeps its character without a full swap. We insulate plastic, wooden and aluminium units, and each material asks for its own handling: timber needs the joints checked for shrinkage gaps before sealing, and the wood is treated so moisture does not sit in the grain. Timber moves with the seasons, so the gasket needs a grade that stays flexible in frost rather than hardening and cracking by the second winter. If the structure is solid and only the perimeter leaks, the work costs far less than replacement and keeps the original joinery.

Choosing a Seal That Survives a Kostanay Winter

Work and gasket by frame material
Window typeWhat we doSeal choice
Plastic, KBE or RehauSwap the perimeter gasketFlexible frost-resistant grade
VEKA and similar profilesCheck the rebate, renew the gasketSoft grade, low compression set
Aluminium, ProvedalSeal the joints firstThin profile strip plus filler
Wooden frameClose shrinkage gaps, treat, resealFrost-flexible strip for moving timber

Measuring, Timing, Warranty and Payment

Before you book anything, it helps to know how the site check runs, how long the job takes, what the warranty covers and when money changes hands.

From the Free Measuring Visit to the Final Check

  • Free visit and advice: the measurer arrives when convenient, takes sizes and helps pick seal, mesh and fixings.
  • Fixed figure: the sum is agreed and written down after measuring, so it does not change.
  • Payment once the job is done: pay by cash, card or Kaspi only after everything is checked.
  • Seven days a week: we take bookings daily, including weekend slots working households request.
  • Cold-weather jobs: insulation can run through a frosty week if the rubber is fitted at a workable temperature, so winter need not mean draughts.

What the Warranty Covers and How You Pay

Repair carries a one-year warranty on both the labour and the parts we replace, a new glass unit is covered for three years, and payment happens once installation is finished, by cash, card or Kaspi. Fitting itself is backed for five years, which matters when the frame and the rubber are done in one go. The figure written down at the site check stays fixed — no additions appear when the crew arrives. Keep the sheet with that sum and the list of replaced parts: it is what the warranty is checked against if a seal needs attention within the year, and it saves a second trip.

How Fast We Can Move When a Pane Fails

We reply on WhatsApp within five minutes and work seven days a week, and an urgent glass unit can be made and fitted within a single day when the opening has to be closed up fast. That same-day route carries a surcharge on the unit itself, so it is worth asking for only when the gap cannot wait. A cracked or misted pane left through a cold snap lets moisture into the frame, and the surrounding parts then need attention too. Residents of Kostanay can send a photo of the damage through the messenger and get a first read on the options before anyone travels out.

Key facts about window insulation without replacement

A cold window rarely has a single cause, and the fix that holds is the one matched to the actual fault rather than to the first obvious gap.

  • Find the cause first: condensation, draughts and cold slopes each point to a different fault, so diagnose before booking work.
  • Treat the whole unit: insulation covers the seal, sash fit, glass unit and reveals together, not one strip alone.
  • Repair or replace by the frame: sound profiles with tired seals take insulation; warped or rotten structures make replacement cheaper.
  • Match the work to the material: plastic, wood and aluminium fail differently, and the seal for a Kostanay winter is chosen for the profile.
  • Start with a five-minute check: the paper test and a look at the reveals tell you more than general advice.

Questions about window insulation in Kostanay

Diagnostics, service scope, materials, condensation

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How can you tell a draught around the sash from a cold reveal or windowsill?

A draught around the sash feels like cold air along the perimeter, sometimes with a whistle. A cold reveal or windowsill shows as a cold surface, condensation and ice in the corners. Check with your hand: if the cold comes from the reveal, not the sash, the problem is in the installation joint.

02What does the window insulation service in Kostanay include besides replacing the seal?

The window insulation service in Kostanay includes a set of works: replacing the seal, adjusting the sash pressure, foaming and sealing the installation joints, and if necessary, insulating the reveals. The exact list depends on the condition of the window and is determined after inspection.

03Will insulation help if the window is old and the sash has sagged, or is replacement needed?

If the sash has sagged, window insulation in Kostanay may give only a temporary effect: first the hardware needs to be adjusted and the misalignment fixed. With severe wear of the profile and double glazing, replacing the window will be more rational — the technician will advise after inspection.

04Which seal is best for plastic windows in frost?

For the frosty climate of Kostanay, an EPDM seal is better suited: it remains elastic at low temperatures and resists temperature fluctuations. Rubber stiffens faster, silicone is good but more expensive; the choice depends on the profile and operating conditions.

05Can insulation stop condensation and mould on the reveals?

Yes, if the moisture appears due to draughts and freezing of the joints and the rebate. Once airtightness is restored, cold air stops entering inside and the dew point shifts outward. When the cause is the double glazing itself, insulation will give only a partial effect.

06Does a technician take on window insulation on a weekend?

Yes, we work without days off, so you can choose any day, including Saturday or Sunday. The measuring specialist will come at the agreed time. The technician will tell you how long the insulation will take after inspecting the window.

Reviews of window insulation in Kostanay

5,0based on 97 reviews on platforms
All reviews