Sash blocker
Prevents the sash from opening wider than a set angle. Price from 1 200 ₸ per item, mounting on profile — from 2 750 ₸.


Sash blocker
Prevents the sash from opening wider than a set angle. Price from 1 200 ₸ per item, mounting on profile — from 2 750 ₸.

Handle turn
Locks the handle in the closed position; can only be opened with a key. Price from 2 800 ₸ per item.

Sliding windows
For aluminium frames where the sash slides sideways. Price from 4 000 ₸ per item.

Cable
A cable with a lock limits the opening width of the sash. Price from 2 500 ₸ per item.

Child lock
Surface-mounted lock with a flag on the sash. Price from 3 250 ₸ per item, mounted on the profile.

5,097 reviews on review sites
A blocker is a small mechanism on the frame or handle that prevents a child from opening the sash on their own.
The blocker is installed between the frame and the sash or on the handle itself. In the first case, the sash opens only to a set angle; in the second, the handle cannot be turned without a key.
For ventilation, the sash is left in the handle-turn mode, and full opening is blocked. The mechanism is selected to match the window profile: plastic, wood or aluminium.

basic sash blocker per item
blocker mounting on profile
warranty on work and replaced parts
Fixing depends on the profile material and sash type: turn, sliding or door.

The main option for turn windows: the body is mounted on the frame, the strike part on the sash.
For plastic and wooden profiles, the fixing is selected according to wall thickness and seal condition.
For aluminium frames, a separate model is used that fixes the sash in the guide.
The old blocker is removed and a new one installed: replacement of the base model — from 1 200 ₸ per item.
Five versions for different sashes and tasks: from basic fixing to a lock with key.
Turn window

Base model, limits the opening angle. For windows where a child needs supervision.
Handle turn

The handle won't turn without a key. Suitable when it's important to prevent unauthorised opening.
Aluminium windows

Locks the sliding sash. For aluminium structures on loggias and in private houses.
Surface-mounted, flag

Surface-mounted sash lock with a flag. Fits onto the profile, handy in children's rooms.
With lock

The cable limits how wide the window opens. For balcony doors and high floors.
The price list covers types of restrictors, installation and related window protection work.
| Type of item | Price |
|---|---|
| Sash blockerbase model | from 1 200₸ per item |
| Handle turn blockerwith key | from 2 800₸ per item |
| Blocker for sliding windowsfor aluminium frames | from 4 000₸ per item |
| Blocker installationmounting on profile | from 2 750₸ per item |
| Child safety window locksurface-mounted, flag type | from 3 250₸ per item |
| Cable restrictor with locklimits opening width | from 2 500₸ per item |
| Penkid lock with cablewith key | from 2 150₸ per item |
| Latch lock installationfor window or door | from 6 800₸ per item |
| Window burglary protectionfull set of measures | from 3 150₸ per job |
| Handle with keyhandle replacement | from 3 650₸ per item |
| Comb restrictor with installationventilation mode | from 1 050₸ per item |
The price is fixed in the order after measuringThe total depends on the number of sashes and the type of mechanismPayment after installation: cash, card or Kaspi
Ask the technician for the priceFacts about the company: experience, work guarantees, free measuring and installation in the city.
we work across Kazakhstan
for window repair and replaced components
measuring and consultation are free, we come at a convenient time
guarantee on window installation
we work daily, in Kostanay from 09:00 to 19:00
we reply within 5 minutes
the restrictor is matched to the profile and painted to match the frame so the mechanism doesn't stand out
you can order in 17 cities of Kazakhstan
Four steps from request to checking the mechanism

You write on WhatsApp, we clarify the sash type and the task: ventilation, child protection or cat protection.

The measurer takes dimensions and helps choose the restrictor model and fixings for the profile and floor.

The technician fits the restrictor to the profile or handle and selects fixings for the window and floor.

We check how the mechanism works and explain how to use the key and ventilation mode.
Good to know
We supply and fit window locks for child safety in Kostanay, choosing the fixing to match your window profile and floor. Our measurer comes free at a time that suits you, our own fitters install on site, and you pay only after the work is done by cash, card or Kaspi.
An openable window has three jobs to cover — holding the sash at a small gap, locking it with a key, or stopping it from swinging wide. The right choice depends on your child's age and the room.
A block lock stops the sash from opening past a set gap, an opening restrictor holds the leaf in one fixed position, and a key handle locks the whole unit with a key a child cannot reach. The block lock is the common pick for a child's bedroom, because the leaf still tips for fresh air while the opening stays too narrow for a small body to pass through. An opening restrictor suits a sash opened to one set angle every day, such as a kitchen vent or a balcony door used for a quick airing. A key handle replaces the ordinary handle and seals the unit completely, which fits rooms where nobody is watching for long stretches. The right pick depends less on the device name and more on whether you want the opening permanently vented or fully sealed when you step out.
The frame decides the fixing: material, profile depth and floor level set what can be mounted at all. Here is how the main types behave.
We fit child safety locks in Kostanay on plastic, wooden and aluminium frames, on vent sashes, and on the glazing of loggias, gazebos and verandas. Plastic systems with a deep rebate take a surface-mounted block lock or a key handle without extra drilling, while slim aluminium profiles often need a low-profile restrictor so the sash still closes flush. Wooden frames hold screws well but splinter at the edge, so the fitter pre-drills every hole and seals it afterwards. A vent opening and a full turn-and-tilt leaf take different hardware, so the same device rarely suits both in one room. Window locks for child safety in Kostanay are selected by the same fitter who checks the frame, so the hardware matches the profile from the start.
The lock bridges the sash and the frame, and our measurer picks the fixing so a mosquito net still sits flush and comes off for cleaning without touching the lock. On most plastic units the net is held by Z-brackets or pins that sit outside the lock's travel, and on tilt-open leaves the restrictor arm is mounted where the net frame does not press on it. Magnetic fastenings need a little more clearance, so the fitter checks the gap before choosing them. A net fitted after the lock, without checking the gap, is the usual reason a sash starts catching on the frame.
The fixing is the most underrated part of the install. It decides whether the device takes the load and whether the sash stays intact over the years.
| Fixing | How it holds the window | Best suited to |
|---|---|---|
| Z-shaped bracket | Bridges profile and sash at a set gap | Standard turn-and-tilt sashes |
| Pin (plunger) | Locks the leaf in the closed position | Slim profiles and vent windows |
| Magnet | Holds the sash without deep drilling | Profiles where drilling is limited |
Our measurer comes at a convenient time, takes the sizes and helps choose the design, mesh and fixings, so the device is matched to the real opening rather than a guess. Measuring and consultation are free, and we reply on WhatsApp within five minutes to book the visit around your schedule. A photo rarely shows what matters: profile depth, the true clearance between leaf and frame, and how the unit sits against the wall. Those values vary between manufacturers, and that clearance decides whether the hardware sits flush or leaves the sash loose. On upper floors we also weigh wind pressure on each panel before picking the hardware. If the clearance is tight, a pin works where a bracket would not fit; on deeper profiles the Z-bracket spreads the stress better. Ask for the visit before you buy online — it is the cheapest way to avoid a return.
Fitting a child-safety device takes less time than most people expect. The preparation matters more than the drilling: measuring, choosing the fixing and checking how the sash moves once it is on.
A lock can be fitted by hand, but the part that decides whether it lasts is choosing the right fixing for the profile and floor, which is where a measuring visit earns its place. Z-brackets, pins and magnets behave differently on a 32 mm Economy profile and a 42 mm Prestige one, and a third-floor sash takes a different fixing from a ground-floor vent. A device drilled into the wrong spot on the frame is hard to move afterwards without leaving visible holes. In our practice, the extra twenty minutes on site save a return trip and a patched frame. If you already know your profile and have the drill bits, doing it yourself is realistic. If not, the visit is cheaper than a second attempt.
Once the tools are packed away, two practical questions remain: what happens if the device works loose over the months, and how the money side is handled. Clear terms settle both.
We repair window locks and replace worn fixings, and repair work and replaced parts carry a one-year warranty. That cover applies to the labour as well as to any fastener we swap out, so a Z-bracket that has worked loose on an aluminium sash or a pin that no longer seats properly falls under the same terms. A sticking device is rarely a dead mechanism — far more often the fixing has shifted a fraction of a millimetre and the bolt no longer lines up. Tightening or swapping that fastener usually restores smooth operation without touching the body itself. On our repair visits we check the seating of every bracket and confirm alignment before we leave. A mechanism that starts to stick is usually a loose mount rather than a failed unit, so a quick tightening often brings it back.
You pay after installation by cash, card or Kaspi, the price is fixed in the order after measuring, and we are open seven days a week. Nothing is collected up front: the fitter completes the work, you check the device on every sash, and only then does payment happen in whichever form suits you. The measuring stage is where the figure is locked in — once sizes and the fixing type are agreed, the amount does not move, whatever the installer encounters on the day. Reaching us is straightforward too: a WhatsApp message gets a reply within five minutes, and the team answers across the weekend when most residents of Kostanay are actually at home to let someone in. Fixing the price at the measuring stage means the sum you agree is the sum you settle once the work is finished.
A child-safety device is a small part that solves a specific problem, and the right choice depends on your window, your mounting point and the person it protects.
Installation and compatibility of window restrictors, ventilation, child safety, window types
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, the restrictor is compatible with a latch handle, but the fixing is chosen so the mechanism does not interfere with turning the handle. During the measuring visit, the technician will check whether there is enough space on the sash and which type of restrictor will fit.
Most likely, the device is positioned too close to the hinge or the wrong type of fixing was chosen. Ask the technician to reposition the restrictor or select a model that does not limit the ventilation mode.
Not always: if the child lock securely locks the sash and the child cannot open it, a second restrictor is not needed. However, for windows with both tilt and turn modes, two devices are sometimes installed at different points to cover all scenarios.
During the measuring visit, the technician examines the width and material of the profile, the hardware, the opening side, and the floor level. Based on these parameters, they select the type of fixing and the restrictor model that will fit without modifications and be convenient to use.
Yes, but the sash must be adjusted first; otherwise, the restrictor will operate with misalignment and quickly fail. During the measuring visit, the technician will assess the condition of the hardware and, if necessary, suggest fixing the sagging first.
Yes, there are special restrictors for sliding systems that secure the sash from sliding. They are selected according to the type of profile and hardware, so during the measuring visit the technician will clarify which model suits your window or door.
Yes, restrictors are installed on windows of loggias, gazebos, and verandas, but the model depends on the profile and opening type. During the measuring visit, the technician will check the structure and suggest a suitable fixing option.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp