Craftsman with a screwdriver at a window handle in an office
from 3 000 ₸ per sashSash adjustment, handle and seal replacement, double glazing replacement. Call-out and inspection by a technician.Calculate

Window Repair in Aktobe

Pressure and sagging · adjustment

Sash adjustment

Simple sash adjustment — from 3 000 ₸ per sash, complex adjustment with sash removal — from 4 000 ₸. The technician will check the pressure and hinges.

A craftsman holds an L-shaped steel hex key for adjusting hinges
GoogleYandex MapsZoon

5,097 reviews on review sites

What window servicing includes and when to call a technician

Window repair is maintenance of hardware, seal and double glazing without replacing the window itself.

How the service works

Window repair is restoring the operation of the sash and its components: hardware, hinges, handle, seal and double glazing. The technician works with what is already installed and replaces only worn parts.

It is worth calling a technician when the sash catches on the frame, the window does not close fully, there is a draught under the sash, or the double glazing is fogged from the inside. Window repair comes with a 1-year warranty on work and replaced components.

Technician in a dark blue T-shirt with a hex key at an open white PVC window sash
1 year

warranty on work and replaced components

from 3 000 ₸

simple sash adjustment per sash

from 3 600 ₸

call-out and inspection by a technician without ordering a repair

5 services
AdjustmentHandleHingesSealDouble glazing

How window restoration is performed in Aktobe

The technician arrives with tools and spare parts, works on site and checks the result on site.

Close-up of an L-shaped hex key in the trunnion on the edge of an open white PVC window sash
  • 01Typical faults the technician fixes

    Sagging sash, catching on the frame, weak pressure, worn seal, broken handle or hinge, crack in the double glazing.

  • 02Hardware adjustment

    Tightens hinges and pressure, eliminates sash sagging and catching on the frame.

  • 03Replacement of worn parts

    Replaces the handle, hinges, seal or double glazing if the old ones cannot be restored.

  • 04Lubrication and hardware maintenance

    Applies lubricant to the moving joints of the hardware after adjustment so the mechanism works smoothly.

Types of window repair work we handle

Five main types of window work with an 'from' price — the exact cost depends on the condition of the window and the parts needed.

Adjustment

pressure and hinges

A craftsman holds an L-shaped steel hex key for adjusting hinges

We eliminate sash sagging and catching on the frame, and adjust the pressure.

from 3 000 ₸

Handle replacement

to match the window profile

A craftsman holds a new white plastic window handle for replacement

We replace a broken or jammed handle with one that fits your profile.

from 2 750 ₸

Seal replacement

around the sash perimeter

Technician holds a roll of grey rubber seal, showing it for replacement

We replace hardened seals to eliminate draughts and freezing.

from 1 000 ₸ per linear metre

Double glazing replacement

cracks and condensation

A craftsman holds a small square double-glazed unit sample for replacement

We replace cracked or internally fogged double glazing with new units.

from 19 500 ₸ per m²

Hardware repair

sash closing

A craftsman holds a roll of gray mosquito netting for repair

We restore hardware operation when the window won't close fully.

from 7 800 ₸/job

Window repair prices in Aktobe

Single price list for the page: type of work, unit of measurement and 'from' price.

Type of workPrice
Call-out and inspection by a technicianwithout ordering a repairfrom 3 600₸ per job
Simple sash adjustmentfrom 3 000₸ per sash
Complex adjustment with sash removalfrom 4 000₸ per sash
Window handle replacementfrom 2 750₸ per item
Hinge replacementfrom 4 750₸ per item
Hardware repairfrom 7 800₸ per job
Sash hardware replacementfrom 10 000₸ per sash
Seal replacementfrom 1 000₸ per linear metre
Double glazing replacementfrom 19 500₸ per m²
Broken glass replacementfrom 8 000₸ per m²
PVC window sill installationfrom 5 500₸ per linear metre
Window reveal installationfrom 3 250₸ per linear metre
Mosquito screen repairfrom 2 500₸ per item
Air valve installationfrom 6 000₸ per item

The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.

Ask about repair cost

Why customers order window restoration from us in Aktobe

Facts about the company that matter when ordering window repair in Aktobe.

Repair warranty1 year

for work and replaced components

Working hoursno days off

we accept requests every day

Paymentafter

cash, card or Kaspi

Price fixingin the order

the price doesn't change after measuring

Measuring and consultationfree

the measurer will come at a convenient time

WhatsApp response5 minutes

we reply within 5 minutes

Experiencesince 2012

we work across Kazakhstan

Coverage17 cities

available in 17 cities of Kazakhstan

How window restoration is carried out at your home

Four steps from request to checking the result.

  1. A hand holds a smartphone with a dark screen near a white PVC window
    01on the day of request

    Request

    We take the request and clarify the problem so the technician brings the right parts.

  2. A tape measure measures the lower edge of the window opening of a white PVC window
    02at the agreed time

    Visit and diagnostics

    The client reports the problem when requesting, the technician brings the necessary parts and arrives prepared.

  3. A removed white window sash on a workbench next to a coil of new black seal
    03on site

    Repair

    Adjusts the sash or replaces worn parts: handle, hinges, seal, double glazing.

  4. A finished white PVC window with a new seal and handle, the sash closed evenly
    04after work

    Check and warranty

    Checks that the window closes tightly. Repair warranty — 1 year.

Good to know

Window Repair in Aktobe from the Masters

We handle window repair in Aktobe with our own crew, no middlemen. We fix plastic, wooden and aluminium windows, adjust sashes, replace seals and glass units, and insulate before winter. A free measuring visit comes first, the price is fixed after measuring, and you pay once the work is done. Every repair carries a 1-year warranty.

Repair or Replace Your Window and How to Decide

Repair is usually cheaper and faster than a full swap, provided the frame and profile are intact. A full replacement becomes the honest answer when the profile itself is damaged or the geometry has shifted.

Signs Your Window Can Still Be Repaired

  • Sagging leaf: a sash that drags along the sill or catches the frame usually points to worn hardware, not to a failing structure.
  • Draughts and cold spots: air slipping past the edges comes from a compressed seal, which is swapped without touching the glass or the surround.
  • Misted glazing: condensation between the panes means the sealed unit has lost its tightness, and only the glass needs swapping.
  • Loose handle or hinges: fittings that wobble or stick are tightened or changed while the structure stays exactly where it is.
  • Sticking in one season only: a leaf that jams in summer and frees up in winter is a classic alignment issue, corrected by adjustment.

When Replacement Makes More Sense Than Repair

A full swap is the honest answer when the profile itself is cracked, warped or rotten, or when the frame no longer holds its shape. A plastic profile that has bowed away from the wall lets cold air in around the whole perimeter, and no amount of seal work closes that gap for long. On timber units, soft or crumbling wood around the hinges means the fixing points have nothing solid left to grip. Glazing is a separate story: a failed pane is swapped on its own, and the surround stays. The clearest signal is repetition — if the same joint needs attention every couple of months, the part no longer holds and changing it beats patching it again. When in doubt, window repair in Aktobe can be assessed on site before you commit to a full swap.

Start With Adjustment or Go Straight to New Hardware

We start with adjustment in most cases, because it is the cheapest step and often restores a leaf that only needs realigning. Our fitters check the hinges, the tilt-and-turn mechanism and the way the sash sits before recommending any part. A setting covers height, pressure and alignment, and it takes minutes per leaf rather than a full visit. If the sash starts catching again a few weeks later, the wear in the hardware is no longer something a setting can compensate for, and the mechanism is due for a swap. That is why we quote alignment and hardware as separate steps — you only pay for the part when the part is actually the problem.

What Is Wrong With Your Window and Which Window Repair It Needs

Owners describe the problem in plain words — it draughts, the sash has dropped, ice forms inside — while a fitter translates each complaint into a specific job. Below is the map from symptom to the work that removes it.

Why a Closed Window Still Lets Cold Air In

A draught through a closed unit almost always comes from a worn seal or a sash that no longer presses evenly against the frame. The rubber gasket flattens over years of sun and frost, loses its rebound and stops filling the gap between sash and frame, so outside air slips past the handle side and along the sill. Hardware adds to it: a locking cam that no longer pulls the sash tight leaves one corner loose, and that corner becomes the coldest spot on the whole unit. The two faults look identical from inside the room, which is why fitters test both before ordering parts. Check the seal and the hardware together — a fresh gasket will not help if the sash is skewed and presses it on one side only.

A Sash That Sags or Catches the Frame

We correct a sagging sash with adjustment of the hinges and locking points, which realigns it without touching the frame. Heavy double-glazed sashes drop on their hinges over time, and the lower corner starts to scrape the frame or the sill; the same misalignment lifts the top corner away and opens a thin gap along the seal. Adjustment moves the sash back into square, restores even pressure around the perimeter and returns the handle to a smooth, firm turn. If the sash catches the frame only in hard frost, the cause is often thermal contraction of the profile, and the setting should be made with seasonal allowance rather than flush. Residents of Aktobe feel this most on north-facing openings, where the frame cools hardest.

Matching the Symptom to the Right Job

common window faults and the work each one needs
SymptomJob that fixes it
Draught when closedSeal replacement or sash adjustment
Sash sags or catchesHinge and locking-point adjustment
Ice on the glass insideInsulation and seal check
Cracked or misted glass unitGlass unit replacement
Handle turns looselyHardware repair

Window Repair Adjustment, Seals and Glass Units We Handle

Three jobs cover most of the calls we get: sash adjustment, seal replacement and a new glass unit. Below is how long each takes, which parts are involved and what the work actually includes.

How Long Adjustment and Seal Replacement Take

We finish adjustment and seal replacement on site in a single visit, and the job covers both the labour and the new parts. A technician adjusts the sash on its hinges and locking points, then runs fresh weatherstripping around the opening leaf. Both stages happen at your home, with no workshop trip and no second appointment. Adjustment alone is usually a matter of minutes per leaf; a full strip change takes longer because the old rubber has to come out of the groove cleanly before the replacement goes in. The strip is renewed around the whole perimeter of the sash at once, not only on the draughty section. Skipping the rest of the perimeter means the cold returns from another corner within a month, and the visit has to be repeated.

Replacing Just the Glass Unit Without Touching the Frame

We replace a single glazed panel without removing the frame, and urgent replacement can be done within one day for a surcharge on the glass unit. The frame stays in the wall, the glazing beads come off, the old panel lifts out and the fresh one goes in with new sealing. That keeps the opening, the slope and the interior finish untouched, which matters in a lived-in flat where a full swap would mean plastering and repainting. A panel that has fogged up inside is already losing its hermetic seal, so drying it out achieves nothing. What gets replaced is the glazing itself, not the whole unit. Ordering it to the exact measured size is what makes a same-frame swap possible in the first place.

Choosing a Seal for Your Profile

  • Profile-matched strip: we renew the weatherstripping on units of any manufacturer, including KBE, Rehau, VEKA and Provedal, matching the profile rather than forcing one universal tape.
  • Why not universal: a generic strip sits loose in a foreign groove, grips worse and flattens faster, so the draught comes back sooner.
  • What the technician checks: groove width, leaf geometry and how the sash presses against the frame when closed.
  • When to change it: once the rubber feels hard, cracked or no longer springs back after you press it.

Plastic, Wooden and Aluminium Windows We Repair

Most repair services take on plastic units only, and wooden or aluminium frames are left without attention. We work with all three types and with non-standard sites as well.

How Repair Differs Across Plastic, Wood and Aluminium

type of unit against typical faults and jobs
Window typeWhat usually failsWhat we do
PlasticSeals and hardwareAdjust, replace seal
WoodenJoints and frameRepair joints, seal
AluminiumHardware and glazingAdjust, replace unit

Units on Loggias, Gazebos and Verandas

We repair units on loggias, gazebos and verandas as well as apartment openings, including small vent panes. A loggia sits in a colder and damper zone than a living room, so the seal and the drainage channel matter as much as the working of the sash. On gazebos and verandas the glazing takes direct wind and temperature swings, and the fastenings loosen sooner than indoors. We fit and repair screens on plastic, wooden and aluminium units, on vent panes, loggia glazing, gazebo and veranda openings, and we choose the fixing to suit the profile and the floor level. On open verandas the sash is worth checking for tightness first — a leaf that still opens smoothly can let in air through a worn seal.

Working With Any Manufacturer

We service units from any manufacturer, so the brand of your profile does not decide whether the unit can be repaired. Our masters replace seals in frames of any make, including KBE, Rehau, VEKA and Provedal profiles, and match the hardware to what is already fitted. A common worry is that the company which installed the unit has stopped servicing it — that is no reason to change the whole assembly. Repair under any profile settles the question without replacement, and the sash keeps its own frame and glazing. Before booking, tell us the profile name from the stamp on the frame if you can find it, and the master arrives with the right seal and fittings.

Insulating Windows With Window Repair Before Winter

Winter insulation is not one job but a review of the whole unit: gasket, hardware and glazing. We look at when to do it and which work is actually needed, and which is wasted effort.

When to Insulate and What It Actually Involves

  • Timing: insulation is best done before the first hard frost, while parts can still be swapped calmly rather than waiting for a fitter in freezing weather.
  • Gasket first: a worn seal is replaced before anything else, because padding over a torn strip leaves the same gap letting warm air out.
  • Hardware: handles, hinges and locking points are tested for a loose fit, since a sash that does not press evenly cannot hold heat.
  • Glazing: the double-glazed panel is inspected for fogging between the panes and for a cold edge, which no amount of tape will fix.
  • What is wasted: foam and film over a sound unit add nothing; they only make sense as a stopgap until the real fault is repaired.

Ice on the Glass and Draughts in Cold Weather

Ice forming on the inside of the glass points to a cold bridge at the gasket or a failing double-glazed panel, not to the weather alone. Draughts that persist with the sash closed usually come from a compressed strip, a misaligned locking point or a frame that has shifted in the opening. When frost builds along the edge of the pane rather than across the centre, the tightness of that edge is the likely cause, and the fix is a new sealed unit rather than another layer of padding. Frost across the middle more often means high indoor humidity meeting a single-chamber pane. On my visits, the pattern of the ice tells us more than the thermometer does — a rim of frost and a clear centre is a different job from an even film over the whole surface.

What We Check Before the Cold Sets In

We inspect the gasket, the hardware and the glazing before winter so that the work targets the real weak point. Our fitter runs a hand along the strip for compression, opens and closes the sash to feel for catching, and looks at the pane edge for fogging or a cold band. If the seal is worn, we replace it with a profile matched to your system; if a hinge or locking point is loose, we adjust or swap it. Everything is done in one visit where the parts allow. Booking the inspection before the heating season starts matters, because a worn strip or a loose hinge is a quick job in mild weather and a far less comfortable one once the frosts arrive.

How the Visit Works, What It Costs and What Is Covered

A free visit, a fixed price, a warranty and payment once the job is done — the four points that decide whether a repair feels safe. Below is how each step runs in practice.

Free Measuring, Fixed Price and a Home Visit

Measuring and consultation are free, the specialist comes at a convenient time, and the price is fixed in the order afterwards. That specialist takes the sizes of every opening leaf, checks the profile and the seal, and helps choose the fittings and the scope of work on the spot. You then get a written order with the exact list of jobs and replaced parts. Locking the price at that stage protects you from add-ons mid-job, because the volume of work is settled before the master picks up a tool. If a moving panel needs adjustment only, the order says so; if a seal and a glass unit are both involved, both lines are listed. In our practice the visit often covers small jobs during the same call.

Warranty on Repair and Replaced Parts

  • Repair cover: every repair carries a 1-year guarantee on labour and on the parts we replace, from seals to handles and hinges.
  • Glass units: a replaced glass unit is covered for 3 years, including the unit itself and the fitting around it.
  • Installation work: fitting a whole unit is covered for 5 years, which matters if the repair grows into a full replacement.
  • Draught after repair: if a window starts letting cold air in again within the cover period, it is handled as a claim, not as a new paid job.

Payment After the Work and Safety Fittings

You pay after installation by cash, card or Kaspi, so the money changes hands once the unit is checked and working. Alongside the repair we fit blockers and child locks during the same call — the master mounts them on the frame or the opening panel, sets the opening limit and shows how the release works for adults. A blocker is installed together with the repair, so there is no separate appointment just for child protection. In our practice the fitting adds 10–15 minutes if the frame is already open for adjustment. Ask for the lock at the free-visit stage: the master then brings the right model for your profile and panel weight instead of ordering it later.

Key facts about sash repair and part replacement

A short recap of what decides the outcome: the fault, the window type and the timing of the work.

  • Repair first: most faults sit in the moving parts, the seal or the glass unit, so check repair before considering a new one.
  • Draught through a closed sash: a worn seal or a misaligned sash is the usual cause, and both are fixed on site.
  • Single glass unit: a failed unit is swapped without touching the frame, and urgent replacement can be done within a day.
  • Type sets the plan: plastic, wooden and aluminium units fail differently, so the repair follows the material and profile.
  • Timing: insulation works best before the cold sets in, and only after the seal and hardware have been checked.

Questions about window repair in Aktobe

Adjustment, repair, replacement, double glazing

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can I adjust a plastic window in Aktobe myself?

You can tighten the sash with a hex key yourself if the cause of the misalignment is clear. But if the sash is sagging, hinges need replacing, or complex adjustment requires removing the sash, it's better to call a technician — otherwise you can easily damage the hardware.

02Is it worth repairing an old wooden window or should it be replaced?

Yes, wooden windows can be repaired: repainted, seals replaced, sash misalignment and gaps fixed. If the wood has rotted or the frame geometry is off, the technician will advise whether to restore or replace the window.

03Why does a window draft around the sash perimeter and what is replaced first?

Most often the worn seal is to blame: it loses elasticity and stops pressing against the frame. The seal is checked and replaced first, and if that doesn't help, the hardware pressure is adjusted.

04What should I do if the double glazing fogs up from the inside?

Fogging between the panes means the double glazing has lost its seal. Such a unit is not repaired but replaced with a new one — the frame and sash stay in place.

05How long does repairing one window on site take?

A simple adjustment takes about half an hour, replacing the seal or hardware takes up to one or two hours. The exact time depends on the window and scope of work; the technician will tell you after inspection.

06What is included in the free measuring visit and window consultation?

The measurer will come at a convenient time, take measurements, and help choose the design, canvas, and fixings. Consultation and measuring are free, and the price is fixed in the order after inspection.

Reviews of window repair in Aktobe

5,0based on 97 reviews on platforms
All reviews