Craftsman adjusting the hardware of a wooden window in the bedroom
from 8 100 ₸ per windowPainting, insulation, glass and glazing bead replacement. 1-year warranty on work.Calculate

Wooden Window Repair in Aktobe

Insulation · Swedish technology

Warmth without draughts

Sealing around the sash perimeter. Price from 4 200 ₸ per linear metre.

Hands insert a new seal into the groove of a wooden sash
GoogleYandex MapsZoon

5,097 reviews on review sites

What wooden window repair includes in Aktobe

Restoration of sashes, frames and glass on site: from insulation and painting to glazing bead replacement and adjustment.

How the service works

Wooden window repair includes work on the frame, sash and glass: insulation using Swedish technology, sanding and painting, replacement of broken glass, glazing bead and hardware. The master adjusts the sash if it has swollen and replaces a rotten section of wood.

The warranty on window repair is 1 year for work and replaced components. The master's visit and inspection cost 3 600 ₸ if you do not order a repair; when ordering work, check the terms with the master.

Honey-coloured wooden window with two sashes: frame, glass, hinges and a handle
from 8 100 ₸

wooden window painting per window

1 year

warranty on work and components

3 600 ₸

visit and inspection without ordering a repair

5 types of work
InsulationPaintingGlassGlazing beadHardware

How sash and frame restoration is carried out at your home

The master arrives with tools and materials, works on site and checks the result together with you.

Technician applies varnish to a wooden window frame with a brush
  • 01Inspection and diagnostics

    The master checks the frame, sash, glass and hardware, identifies the cause of the problem and the type of work.

  • 02Window preparation

    Covers the work area, removes the sash if necessary, cleans and sands the wood surface.

  • 03Repair and replacement

    Insulates, paints, replaces glass, glazing bead or hardware, adjusts the sash to the opening.

  • 04Check and handover

    Checks sash movement, tightness of fit and hardware operation. Glass replacement — from 8 000 ₸ per m².

Types of work for restoring wooden sashes and frames

Five types of work with a price per unit. The master confirms the exact cost in the order after measuring.

Insulation

Swedish technology

Technician holds a roll of soft, flexible grey rubber seal

Sealing around the sash perimeter so draughts do not come through the gaps.

from 4 200 ₸/linear metre

Glass replacement

Broken or cracked

A craftsman holds a small clean pane of glass in his hand, whole and transparent

Removal of old glass, installation of new glass, fixing with glazing bead.

from 8 000 ₸/m²

Glazing bead replacement

Glass fixing

Hands fixing a wooden glazing bead back in place with a hammer, wooden window repair

New glazing bead if the old one has fallen out or dried out.

from 1 150 ₸/pc.

Sash adjustment

Swollen or won't close

Hands planing the edge of a wooden window sash, wooden window repair

Removing excess wood layer, adjusting sash movement.

from 16 000 ₸/job

Section replacement

Rotten bottom of the sash

A craftsman holds a small block of pine wood in his hand, even and light

Cutting out damaged wood and inserting a new section.

from 16 000 ₸/job

Wooden window repair prices in Aktobe

Cost of work on wooden windows. The exact amount is fixed in the order after measuring.

Type of workPrice
Wooden window restorationsanding and paintingfrom 18 000₸ per m²
Wooden window paintingfrom 8 100₸ per window
Wooden window frame repairfrom 16 000₸ per job
Wooden window repair and insulationfrom 28 000₸ per window
Wooden balcony block repairfrom 53 500₸ per unit
Wooden window hardware replacementfrom 1 150₸ per unit
Wooden window insulation using Swedish technologyfrom 4 200₸ per linear metre
Inter-frame seal installationfrom 2 800₸ per window
Broken glass replacementfrom 8 000₸ per m²
Master's visit and inspectionwithout ordering a repairfrom 3 600₸ per job

Price is fixed in the order after measuringMeasuring and consultation — freePayment after installation: cash, card or Kaspi

Check repair cost

Why wooden window repair in Aktobe is ordered from us

Facts about the company: warranty, measuring, payment and service geography.

Repair warranty1 year

for work and replaced components

Measuring and consultationfree

the measurer will come at a convenient time

Paymentafter installation

cash, card or Kaspi

We workwithout days off

daily, check reception hours

Geography17 cities

of Kazakhstan, including Aktobe

WhatsApp response5 minutes

during working hours

Experiencesince 2012

we work across Kazakhstan

Pricefixed

in the order after measuring

How wooden window repair is carried out in Aktobe

From request to checking the result — four steps.

  1. Hand holding smartphone by wooden window, ceramic vase on windowsill nearby
    01at a convenient time

    Request

    Describe the problem on WhatsApp or by phone. We'll reply within 5 minutes and agree on a time.

  2. Tape measure stretched along wooden window sash during measurement before repair
    02by agreement

    Agreeing on time and scope

    Choose a convenient day and prepare access to the window: move furniture and curtains. The master will clarify the scope of work and what will be needed for the repair.

  3. A workbench with tools, sandpaper, paint and sealant for window repair
    03during work

    Clarifications during work

    The master will agree with you on the paint shade and type of seal so the result meets expectations.

  4. Repaired wooden window with fresh white paint: one pane per sash, brass hinges
    04after completion

    Acceptance of the result

    Check how the sash opens and closes, inspect the joints and seal fit. Pay attention to smooth movement and absence of gaps.

Good to know

Wooden Window Repair in Aktobe

We handle wooden window repair in Aktobe with our own crew, not through middlemen. We come for a free measuring visit, fix sagging sashes, swap seals and glass units, and insulate frames for winter. You pay after the work is done, and repair carries a 1-year warranty on labour and replaced parts.

Can an old wooden window be repaired or is replacement the only way

Timber units are repairable more often than owners expect. What decides the question is the condition of the wood and the geometry of the opening, not the age of the window.

Signs a wooden window can still be saved

A timber unit is usually repairable when the wood is sound, the leaf still sits square and the problem is limited to seals, hardware or a cracked pane. Run a palm along the bottom rail and the sill: slight roughness or a hairline gap beneath the paint is normal wear, while soft wood that dents under a fingernail is not. Test the leaf by opening it halfway and letting go — a sash that stays where you put it has kept its geometry, and one that swings shut on its own has dropped on its hinges. Worn seals, stiff handles, sagging hinges and a misted glass unit are all jobs that leave the structure in place. Rot that crumbles under a screwdriver or a shape that no longer closes flush is the real cut-off point, not the year the unit was made.

When a wooden frame is past repair

We tell a client straight when a frame is too far gone, because patching soft, crumbling wood only buys one season before the draught returns. A bottom rail that has soaked up years of condensation rots from the inside out, and filler laid over it hides the problem rather than solving it. The free measuring visit settles the question on the spot: the measurer presses an awl into the suspect sections, checks whether the leaf can be rehung and tells you which parts are worth replacing. Where the timber is still solid, we carry out the repair and give a one-year warranty on the labour and the parts we fit. A patch that hides rot under filler fails at the first hard frost, so the honest call is cheaper than a repeat visit.

Why wooden windows let in draughts and how we stop it

Wood expands and contracts with the seasons, so draughts in a timber frame usually come down to the gasket, the gaps and the fittings rather than the wood itself.

Where the cold actually gets in

Most draughts in a timber window come from a compressed gasket, a shrunk sash gap or loose fittings, not from the timber itself. The strip along the leaf and the casing flattens over time, and once it loses its spring the wind finds a path through a gap no wider than a credit card. Hinges and the locking bar work loose too, so the leaf no longer pulls tight against the casing and cold air slips past the closing edge. Plastic profiles hold their shape more rigidly, while timber keeps moving with humidity, which is why such a window needs its gasket checked more often than a PVC one. The strip that was tight in autumn can open a gap by midwinter, so the fix is checked season by season.

Sealing and insulating a wooden window for winter

  • Gasket replacement: we swap the worn strip for a fresh one on windows of any manufacturer, including KBE, Rehau and VEKA profiles.
  • Casing insulation: we insulate the casing and the leaf edges without taking the whole window out, so the room stays usable the same day.
  • Fitting adjustment: we tighten the hinges and the locking bar so the leaf presses evenly and the new strip sits under proper pressure.
  • Weather check: we test the finished window against a draught and show you which spots to watch as the season turns.
  • No foam shortcuts: we skip foam stuffed into gaps, because it traps moisture and speeds up rot along the timber.

What a wooden window repair actually includes

A wooden window repair is a set of jobs matched to the specific fault, not one fixed package. Below is what we do, which symptom each job solves, and what a client should watch for.

The repair jobs we do on wooden windows

Which job matches which wooden window fault
JobSymptom it fixesWhat we check
Sash adjustmentSash catches, drags or rattlesHinge wear, square, gaps
Seal replacementDraughts, whistling, cold at edgesSeal groove, sash contact
Hardware repairHandle loose, lock won't catchLocking points, screws, plates
Glazing swapFogging between the panesBead condition, rebate, drainage
Frame restorationRot, cracks, loose jointsWood soundness, joint tightness
PaintingFlaking, bare patches, grey surfaceSanding depth, primer, topcoat

Glass, putty bead and paint on a wooden frame

We swap a fogged glazing panel or a single cracked pane and renew the putty bead and paint, so the sash is sealed and protected again rather than just patched. On wooden sashes the bead holds the glass and keeps water out of the rebate, so a cracked or loose piece is replaced before the new panel goes in. Panel replacement carries a 3-year warranty. Paint is not cosmetic on wood, because a bare or flaking surface takes in moisture and starts the rot that later forces a full replacement. In our practice, a surface repainted in time outlasts an untouched one by years, and that work stays far below a new window.

How the measuring visit and repair work in Aktobe

The job starts with a free measuring visit at your home and ends with payment once you have accepted the result. Here is how the process runs from the first message to a finished repair.

From the first call to a finished repair

  • First message: you write to us on WhatsApp and get a reply within five minutes, seven days a week.
  • Free measuring visit: the measurer comes at a time that suits you, sizes the window and helps choose the design, mesh and fixings.
  • Agreed scope: the measurer sees the frame in person and agrees the work on the spot, so the quote matches the real job instead of a phone estimate that changes on site.
  • Fixed price: the price is fixed in the order after that visit, and nothing is added later for the agreed work.
  • Payment on acceptance: you pay after the repair is done, by cash, card or Kaspi.
  • Our own fitters: the same team that measured carries out the repair, so the frame is not handed between crews.

Private houses, verandas and other timber frames

We repair timber windows in flats, private houses, verandas and summer rooms, and we also fit screens on plastic, timber and aluminium frames, including balcony and gazebo openings. Old frames in private homes often sit in worse conditions than a city flat: sun on one side, wind and snow on the other, and no sheltered corridor to soften it. On a veranda we check the putty bead, the seal and the paint along the sill first, because that is where water settles after rain. A veranda frame takes far more weather than a bedroom window, so it usually needs the seal and paint checked more often than the rest of the house. If the wood under the paint is still sound, a repair holds well; if it has gone soft at the corner joint, we say so before starting.

Warranty, payment and a mosquito screen for a wooden frame

After the work is done, what matters is what you hold in writing and how the same frame gets covered against insects. Both parts are settled at the same visit.

What the warranty covers and how you pay

Wooden window repair aktobe carries a 1-year warranty on labour and replaced parts, glass unit replacement carries 3 years, and you pay after the work by cash, card or Kaspi. The price is fixed in the order once measuring is done, so nothing shifts mid-job. Our team handles repair and glass work on plastic, timber and aluminium frames alike, and the warranty document names both the labour and each part we swapped. A written warranty covering labour and parts matters most for seals and hardware — those are the components that fail first if the fit was rushed, and the paper is what gets them adjusted without argument. Keep the signed order next to the window: it lists the parts replaced and the date the warranty starts.

Fitting a mosquito screen on a wooden window

We fit a made-to-size framed screen on a wooden window and pick the fixing for the frame and floor, using Z-brackets, pins or magnets, and we paint the screen frame any colour to match your windows. The measurer chooses the fastening on site by window profile and storey, so a screen on a first-floor kitchen window and one on an upper loggia are mounted differently. A framed screen takes 10–15 minutes to make to your size, a pleated one 40–60 minutes, and both come with a 1-year warranty. A framed screen lifts out from inside in a minute, so taking it off for winter keeps the mesh and the frame in better shape for longer.

What to look at when repairing wooden windows

A window rarely needs replacing the moment it starts to fail. The decision comes down to a few simple checks, and the points below sum up what matters most before you book anything.

  • Check the frame first: rot, soft timber or a warped sash means the repair will not hold, while sound wood usually can be saved.
  • Find the real draught: cold air mostly enters through worn seals, gaps at the sash and loose putty, not through the glass itself.
  • Repair covers more than glass: putty beads, paint, seals and fittings all belong to the job, so ask what is included before anything starts.
  • Measuring decides the result: a free visit sets exact sizes, fixings and profile, and the price is fixed in the order afterwards.
  • Warranty and payment: repair labour and replaced parts carry a one-year warranty, and payment follows installation.

Questions about wooden window repair in Aktobe

Repair specifics, glass replacement, mosquito screens, painting and warranty

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How does wooden window repair differ from adjusting plastic windows?

Wooden window repair often involves restoring the sash geometry, replacing the glazing bead and seal, while plastic window adjustment usually comes down to tightening the hardware. Wood requires more thorough preparation and consideration of its condition, so the approach is individual.

02Can one glass pane in a wooden frame be replaced without touching the others?

Yes, replacing a single glass pane in a wooden frame is possible without removing the others. The technician carefully removes the glazing bead, replaces the damaged glass and reinstalls it, preserving the integrity of the other elements.

03How to attach a mosquito screen to a wooden frame without damaging the wood?

The fixings for a wooden frame are chosen based on its condition: they can be brackets, plungers or magnets. The surveyor will inspect the frame to preserve the wood and advise whether drilling is needed.

04Why do wooden windows start to stick and close poorly?

Sash sticking is usually caused by wood drying out, hardware wear or frame distortion. Restoration includes addressing these causes: adjustment, hardware replacement and geometry restoration.

05Can wooden windows be painted and how often should it be done?

Yes, painting is part of restoration and protects the wood from moisture and UV. The frequency depends on operating conditions; usually the coating is renewed every few years, but the technician will assess the exact timing during inspection.

06Is there a warranty for wooden window repair in Aktobe?

We provide a 1-year warranty on work and replaced components for wooden window repair. If problems related to the repair arise during this period, we will fix them.

Reviews of wooden window repair in Aktobe

5,0based on 97 reviews on platforms
All reviews