Sash adjustment
Simple adjustment — from 3 000 ₸ per sash, with removal — from 4 000 ₸. Eliminates sagging and tight movement.


Sash adjustment
Simple adjustment — from 3 000 ₸ per sash, with removal — from 4 000 ₸. Eliminates sagging and tight movement.

Hardware repair
Restoring the mechanism without full replacement — from 7 800 ₸ per job. The handle turns freely again.

Seal replacement
We replace seals in windows of any manufacturer — KBE, Rehau, VEKA, Provedal. Ask the master for the price.

Scissors replacement
Scissors or corner switch — from 5 500 ₸ per item. We restore proper opening.

Handle replacement
With removal of the old one — from 2 750 ₸ per item. We'll match the color and profile of your window.

5,097 reviews on review sites
The master inspects the sash, hinges, scissors and compression, names the cause and agrees on the work before starting.
Plastic window repair is the restoration of sash movement, compression and hardware operation without replacing the window itself. The master checks hinges, scissors, handle, seal and adjusts mechanisms on site.
In the sash, hinge movement and handle operation are restored; in the frame, compression and sash fit; in the hardware, scissors, blocker and locking elements. The exact scope of work is determined by the master after inspecting the components.

check hinge movement, compression and handle operation
inspect scissors, blocker and locking elements
take the window system into account when selecting components
Causes and signs of breakdowns by component: hardware, hinges, scissors, compression. One card per component.

The mechanism gets clogged or worn out. A sign is a tight or jammed handle. Repair or hardware replacement is needed.
Hinges weaken under the weight of the sash. A sign is the sash catching on the frame or rubbing at the bottom. Adjusting the hinges helps.
The blocker and scissors have failed. The sash turns and tilts at the same time. Repair of the blocker and scissors is needed.
The part of the turn-and-tilt mechanism breaks under load. The sash stops fixing in the tilted position. Replacement of the scissors is required.
The pressure is weak or the seal is worn. Draughts come through the gaps, and ice appears in winter. Adjustment of the pressure and replacement of the seal are needed.
Main works with 'from' prices: sash adjustment, repair and replacement of hardware, handle, scissors, seal for KBE, Rehau, VEKA, Provedal.
simple or with removal

We eliminate sagging and tight movement. Simple — from 3 000 ₸, with removal — from 4 000 ₸ per sash.
mechanism restoration

We fix a jammed mechanism without full replacement. The handle and sash work smoothly again. Ask the technician for the price of the work.
full set per sash

We replace the whole set on one sash if repair is impossible. From 10 000 ₸ per sash.
with removal of the old one

We select a handle to match the colour and profile of the window. We remove the old one and install a new one. From 2 750 ₸ per item.
KBE, Rehau, VEKA, Provedal

We replace the seal in windows of any manufacturer. We restore the pressure around the perimeter. Ask the technician for the price.
Price list items with units and notes; the final amount is fixed in the order after measuring.
| Type of work | Price |
|---|---|
| Simple sash adjustmentbasic operation for sash movement | from 3 000₸ per sash |
| Sash adjustment with removalwhen the sash is removed | from 4 000₸ per sash |
| Balcony door adjustmentdoor leaf and rebate | from 6 000₸ per item |
| Hardware repairrestoring the mechanism without full replacement | from 7 800₸ per job |
| Hardware replacement on sashfull set for one sash | from 10 000₸ per sash |
| Replacement of scissors or corner switchpart of the turn-and-tilt mechanism | from 5 500₸ per item |
| Replacement of cam or strike platecompression elements | from 1 300₸ per item |
| Hinge replacementsash hinges | from 4 750₸ per item |
| Window handle replacementwith removal of the old one | from 2 750₸ per item |
| Conversion to turn-and-tilt openingchanging the opening scheme | from 19 000₸ per sash |
| Conversion of fixed window to openingrequires a new sash and hardware | from 28 000₸ per sash |
| Installation of micro-lift or extra compressionadditional comfort option | from 1 700₸ per item |
| Installation of balcony latchfixing the door leaf | from 3 750₸ per item |
| Opening a blocked sashwhen the sash is jammed | from 2 400₸ per sash |
| Cleaning and lubrication of hardwareprevention of jamming | from 1 250₸ per sash |
The price is fixed in the order after measuring.Measuring and consultation are free.Payment after installation: cash, card or Kaspi.
Check the repair costCompany facts: warranty, working hours, payment after installation and price fixation after measuring.
for work and replaced components
daily, at a time convenient for you
cash, card or Kaspi
in the order after measuring, without extra charges along the way
the technician will come at a convenient time and take measurements
we replace in windows of KBE, Rehau, VEKA, Provedal, etc.
during working hours we reply within 5 minutes
you can order in 17 cities of Kazakhstan
Four steps from request to checking the work together with the owner.

Describe the problem on WhatsApp or by phone. We will clarify what is wrong with the sash and when it is convenient to receive the technician.

The technician checks the hinges, scissors, handle and pressure. He names the cause and agrees on the work and price.

Adjusts, repairs or replaces components right at your home. The price is fixed in the order after measuring.

Together with you we check the sash movement, pressure and handle operation.
Good to know
We handle pvc window repair in Aktobe with our own fitters, not through an agency. We regulate sagging sashes, replace seals on KBE, Rehau, VEKA and Provedal profiles, swap misted glass units and insulate windows before winter. Every repair carries a one-year warranty on labour and replaced parts, and you pay only after the work is done.
Nearly every complaint about a window comes down to three nodes: the seal, the hardware or the glass unit. Here is how to read the symptom and work out which one needs attention.
A draught under the sash almost always points to a compressed seal or a leaf that no longer presses evenly against the frame, and we check both before quoting any repair. The gasket loses its rebound after years of compression and temperature swings, while the hardware that pulls the moving panel tight drifts out of adjustment as the hinges settle. Run a sheet of paper around the closed window: if it slides out with no resistance at one corner, the fault is local, and a regulation plus a gasket swap usually settles it without touching the glass unit. If the paper pulls free along the whole bottom edge, pressure is gone across the width and the hinges need attention first. We see this pattern most often on units facing the steppe wind. This is exactly where pvc window repair aktobe begins, with a simple check of the seal and hardware.
A leaf that catches the frame or scrapes the sill has dropped on its hinges, and our fitters correct it by adjusting the hinge screws rather than replacing the panel. Each hinge carries vertical and horizontal adjusters, so a few turns lift the moving part back into square and restore an even gap on all four sides. Check the gap along the top and bottom in daylight: an uneven crescent of light means the drop is recent and a regulation will hold, while a panel that has been dragging for months may need new parts. On heavier double-sash windows the lower hinge takes most of the load, so it wears first and the opening tilts toward the handle side. Catching it early keeps the profile from wearing through at the corner.
Replacing a whole window is the last resort, and in most cases repairing a single unit solves the problem. Below is where the line between repair and replacement actually runs.
Seals, handles, hinges, locking gear and glass units are all replaceable on their own, so a window with a sound frame and profile rarely needs to be swapped out entirely. On plastic systems the moving hardware — the tilt-and-turn mechanism, the handle spindle, the hinge pins — wears out faster than the plastic itself, and each of those parts is swapped without touching the frame. A failed glass unit is lifted out and a new one set into the same rebate in a single visit. We repair plastic windows across Aktobe and treat the frame as the fixed base: as long as it holds, the work stays on the components. Look at the frame corners and the profile surface first — if the plastic is not cracked, discoloured or warped, the frame has years left and the money is better spent on the moving parts.
| Symptom | Likely cause | Work that fixes it | Part replaced |
|---|---|---|---|
| Draught at the sash edge | Compressed seal | Seal replacement | Seal |
| Sash catches the frame | Dropped hinges | Regulation | Hinge parts if worn |
| Fog between the panes | Failed glass unit | Glass unit swap | Glass unit |
| Handle turns loosely | Worn locking gear | Gear replacement | Locking gear |
| Cold coming through the frame | Thin seal and gaps | Insulation plus seal | Seal |
A gasket must match the profile and the thickness of the sash, so no single universal strip exists. Here is how we choose the right part for a specific window.
We replace seals in windows of any manufacturer, including KBE, Rehau, VEKA and Provedal, matching the profile channel and the sash thickness rather than trimming a generic strip to fit. The channel width on a Rehau frame differs from the one on a VEKA sash, and the compression gap shifts again when the hinge side carries more weight than the handle side. Our fitter measures channel depth and gap at three points before cutting the replacement, since a part sitting too high stops the leaf from locking and one sitting too low leaves a draught path along the frame. The same rubber goes onto tilt-and-turn sashes, fixed lights and balcony doors. A gasket too thin for the recess flattens within a season, so we check depth and compression before any cut.
Rubber on a window that faces sun and wind typically needs replacing every five to seven years, while a shaded unit on a sheltered facade keeps its elasticity noticeably longer. The calendar matters less than the material itself. A gasket gone shiny, hard or cracked at the corners has already stopped sealing, whatever its age, and the draught shows up first along the hinges and the bottom edge. Press a fingernail into the rubber near a corner: if the dent stays, the material has lost its memory and no amount of adjusting the hardware will close the gap. On the steppe side of a building, where dust and temperature swings are harsher, the same part can fail in half that time, so check the corners every autumn before the heating season starts.
One appointment carries the job from your first message to the final payment. Here is what happens at each step and what the visit actually covers.
You message us on WhatsApp, we reply within five minutes, and a fitter comes to your home at a time that suits you to measure and confirm the job before anything is ordered. Measuring and the consultation are free, and the measurer takes exact sizes, checks the profile and helps choose the fittings, fixings and mesh if a screen is involved. We are open seven days a week, so a weekend slot costs you nothing extra. The price is fixed in the order after measuring, so you know the figure before anything begins. Have the window open and the faulty sash within reach when he arrives — seeing the moving panel tells him more about the fault than any description over the phone.
The call-out covers the labour and the components that go into the window, so the seal, hinge hardware or locking gear are supplied and fitted in the same appointment wherever the profile allows. The technician adjusts the leaf, replaces worn gaskets on KBE, Rehau, VEKA or Provedal frames, and services plastic doors and balcony blocks on the same trip. Regulation alone takes minutes per panel, but a seal swap needs the sash removed and refitted, so plan for the window to be free rather than blocked by furniture. Repair work carries a one-year warranty on labour and replaced components.
A warranty and a clear payment order remove most of the worry from a repair, while a little seasonal care keeps the window working for longer. We cover both below.
Every repair carries a one-year warranty on both the labour and the parts we replace, and a glass unit swap carries a three-year warranty on the unit itself. That one-year term covers the seal we fit, the hinges and hardware we change, and the regulating work on the sash. If a draught returns within that period because a fitted part failed, we come back and put it right. The three-year term applies only to the glass unit we supply and install, not to the surrounding frame. Keep the order sheet the fitter leaves — it lists the parts fitted, and that list is what the warranty is checked against if a seal or hinge part ever needs a second look.
We work as a direct contractor with our own fitters, and you pay after the repair is finished by cash, card or Kaspi, with the price fixed in the order once the measuring is done. No deposit is taken up front, and no middleman sits between you and the person holding the tools. The fitter who measures is the one who does the work, so any question about a hinge or a seal goes straight to the person who handled it. Because the price is locked in after measuring, a seal that turns out to need a different profile does not change the figure you agreed — the fitter adjusts the part, not the bill.
The points below pull the whole repair process into one short checklist — from reading the symptom to the moment the work is signed off.
Warranty, differences from wood, timelines, insulation, spare parts
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionFirst check the developer's warranty terms: third-party interference with the hardware may void it. If the defect is recognized as a warranty case, the developer will handle the repair; otherwise, service technicians will fix the window.
Plastic windows are repaired through the hardware and seal: adjustment, replacement of parts, and tightening. Wooden windows often require work on the sash and frame itself, as well as painting, so PVC repair is usually faster and cleaner.
One window takes about half an hour to an hour, depending on the design and condition of the profile. The technician will tell you how long several windows in the apartment will take after inspection.
A combination works: replacing worn seals, adjusting the sash pressure, and checking the seams. Sometimes an energy-saving double glazing is added, but first the technician checks where exactly the cold is coming from.
Yes, the technician arrives with standard components and seals for common profiles. If a rare part is needed for your window, it is selected after inspection and agreed upon separately.
First, it is worth understanding where exactly the air is coming from: from under the sash, through the hinges, or from the reveals. If the cause is not eliminated, the technician should recheck the pressure and fixings, as the work performed is covered by warranty.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp