Adjustment
Switching the sash to the required pressure mode — from 3 000 ₸ per window. The master will check the sash movement and adjust the hardware.


Adjustment
Switching the sash to the required pressure mode — from 3 000 ₸ per window. The master will check the sash movement and adjust the hardware.

Lubrication
Removing old lubricant and applying new — from 1 250 ₸ per sash. Extends the mechanism's life and eliminates squeaking.

Seal
Silicone treatment by length — from 750 ₸ per linear meter. Keeps the rubber elastic and protects against draughts.

Drainage
Cleaning drainage holes is included in comprehensive window service — from 10 000 ₸ per window. Removes water stagnation in the profile.

Comprehensive
Service for all windows in the apartment at a single price — from 6 600 ₸ per apartment. The master will go through every sash.

5,097 reviews on review sites
Adjustment, hardware lubrication, seal care and drainage cleaning — a set of works to maintain sash pressure and movement.
PVC window service is a scheduled set of works that restores proper pressure and easy movement to the sashes. It includes seasonal adjustment, cleaning and lubrication of hardware, silicone treatment of the seal and cleaning of drainage holes. Such care extends the mechanism's life and keeps the apartment warm.
Preventive maintenance before symptoms appear extends the hardware's life and preserves the factory pressure characteristics: the mechanism works longer without play, and the seal does not lose elasticity. The master checks each sash and selects works based on the actual condition of the window, not a template.

cost of seal treatment per linear meter
seasonal adjustment of one window
service for all windows in the apartment at a single price
From seasonal adjustment to seal replacement for any manufacturer — the technician selects the work based on the condition of the sashes.

Switching the sash to winter or summer pressure mode. The work is done for one sash, price — from 3 000 ₸ per window.
Removing old lubricant and applying new one to moving parts. Reduces wear on the mechanism and eliminates squeaking. Work is counted per sash, price — from 1 250 ₸.
Silicone keeps the rubber elastic and protects it from cracking. Work is counted by the length of the seal, price — from 750 ₸ per linear meter.
Water drains freely, does not stagnate in the profile or overflow. Included in comprehensive window service, price — from 10 000 ₸ per window.
We replace seals in windows of any manufacturer: KBE, Rehau, VEKA, Provedal and others. Price — from 750 ₸ per linear meter.
Five formats — from a one-time adjustment of a single sash to comprehensive service for an apartment or office. The technician will advise which set covers your needs.
One sash

Eliminating jamming and misalignment, setting the pressure. Suitable when the sash closes tightly.
Pressure and sash movement

Adjusting the pressure and movement of the balcony door sash. Eliminates drafts and tight movement.
Removal and installation

Removing the old handle and installing a new one. We select a model to match your window profile.
Slot mode

Additional ventilation mode for air flow without fully opening the sash.
Apartment or office

Full set of work for one sash or service for all windows in an apartment at a single price.
PVC window service work with unit of measurement and visit cost.
| Type of work | Price |
|---|---|
| Comprehensive window servicefull set of works for one sash | from 10 000₸ per window |
| Apartment window serviceservice for all windows at a single price | from 6 600₸ per apartment |
| Seasonal maintenance (winter/summer)switching the sash to the required mode | from 3 000₸ per window |
| Cleaning and lubrication of hardwareremoving old lubricant and applying new | from 1 250₸ per sash |
| Cleaning and lubrication of sealsilicone treatment by length | from 750₸ per linear meter |
| Simple sash adjustment during servicingeliminating sticking and misalignment | from 3 000₸ per sash |
| Balcony door adjustmentsetting the pressure and movement of the leaf | from 6 000₸ per unit |
| Installation of winter (slot) ventilationadditional ventilation mode | from 7 600₸ per unit |
| Thermal imaging inspection of windowsfinding heat leak spots | from 9 000₸ per job |
| Master's visit and inspectionwithout ordering repair | from 3 600₸ per job |
| Elimination of draughtsadjusting pressure and seal | from 3 500₸ per sash |
| Window handle replacementremoving old and installing new | from 2 750₸ per unit |
The price is fixed in the order after measurement.Measurement and consultation are free.Payment after installation: cash, card or Kaspi.
Check the priceFacts about the company: repair warranty, working hours, payment procedure and price fixing.
for work and replaced components
we work across Kazakhstan
working daily, including holidays
cash, card or Kaspi
the cost is fixed in the order
we answer service questions
in Aktobe, including weekends and holidays
for window installation work
From request to result check — four steps

You leave a request via WhatsApp or by phone. We agree on a convenient time for the technician's visit.

The technician specifies what work is needed and in what order it will be performed.

Performs the agreed set of work: adjustment, lubrication, seal treatment, cleaning.

We check the movement of sashes and pressure, the technician gives recommendations for further care.
Good to know
We provide window maintenance in Aktobe with our own technicians, not subcontractors. We diagnose draughts, sticking sashes and worn seals, then adjust hardware, replace weatherstripping on any profile brand or swap a glass unit, with a free measuring visit, a 1-year warranty on repair and payment after the work is done.
Maintenance begins before any tool comes out. What matters first is the diagnosis: whether the window is draughty, catching, fogging up or simply worn along its sealing contour.
A draught around a closed leaf almost always comes from a worn seal, a leaf that has dropped out of level or a hardware mode set for the wrong season, not from the pane itself. Weatherstripping flattens with age, so the gap it once closed slowly reopens along the perimeter. A leaf that has slipped on its hinges leaves a thin slit on the hinge side, while winter and summer hardware modes change how tightly the panel presses against the frame. Run a hand along the perimeter on a cold day — cold spots cluster at the hinge side first, which tells the fitter whether to adjust or re-seal before touching anything else. None of these faults show on the pane, which is why a window can feel cold and still look perfectly intact.
| Symptom | Likely cause | What we do |
|---|---|---|
| Draught at perimeter | Worn seal or dropped leaf | Re-seal or adjust |
| Leaf catches frame | Hinge out of level | Adjust hinges |
| Loose handle | Worn locking mechanism | Replace hardware |
| Fog inside the pane | Sealed unit failed | Swap glass unit |
A maintenance visit is a sequence of steps that runs from the first measurement to the closing check, not a single twist of a screwdriver. Each stage leaves a visible result you can trace.
A single unit usually needs under an hour for adjustment or a seal swap, while a glass unit replacement is booked as separate work. We travel to homes across Aktobe seven days a week, and a message on WhatsApp gets a reply within five minutes. Measuring and consultation cost you nothing, so the first trip spends only your time. For window maintenance in Aktobe, the visit follows the same order of steps from survey to handover. Most appointments cover one or two leaves plus a look at the frame and the hardware mode. Booking the survey for a weekday morning often means the technician completes the adjustment in the same trip. In our practice, a draughty unit caught that way is usually sealed before the next cold snap rather than during it.
The weatherstripping is the part of a window that wears out first, and replacing it cures most draught complaints without touching the glass unit at all. Here is how to spot dead weatherstripping and what a proper swap involves.
Weatherstripping is worn when it feels hard or flattened instead of springy, when it has visible cracks or gaps at the corners, or when a paper strip pulled from a closed sash slides out with no resistance. Run a finger along the sash perimeter: fresh rubber gives slightly under pressure and springs back, while an aged gasket stays dented where you pressed it. Look at the corners first, since the material compresses there hardest and splits earliest. A five-minute paper test on each side tells you more than a draught you notice only on windy days. Rubber ages faster on the sunny side of a building, so the perimeter facing the sun often needs replacing a season or two before the shaded sides of the same window.
We replace weatherstripping on sashes of any manufacturer, including KBE, Rehau, VEKA and Provedal profiles, matching the cord to the groove rather than forcing a universal band. A one-size product squeezed into a narrow channel sits proud, rubs on the frame and starts leaking again within a season, so we cut the profile-specific material to the exact perimeter length and press it home at every corner. We also change the gasket on wooden and aluminium frames, where the groove geometry differs from plastic systems. A correctly matched seal restores the leaf's closing pressure, so the handle turns with the same resistance it had when the unit was new — a quick way to judge whether the job was done right.
Part of the adjustment work is within a homeowner's reach, but some settings cost more to get wrong than a fitter's visit, and it helps to know exactly where that line sits.
Hardware here has a winter and a summer setting that changes how tightly the sash presses against the seal, and it should be switched twice a year as the seasons turn. The mechanism sits on the sash edge as a small pin or a slot on the locking points: turning it inward pulls the leaf harder against the weatherstripping, turning it outward eases the pressure. In summer mode the seal relaxes and the panel still closes without force, which matters in the heat when profiles expand slightly. Leaving a unit in winter mode through summer compresses the seal and shortens its life, so the switch is as much about protecting the gasket as about comfort. Check the mode on every sash you can reach, not just the one that felt draughty last winter.
When a room feels cold but the frame is sound, the choice between extra insulation and new glazing comes down to diagnosis. The guarantee then shows who stands behind the result.
If the panes are clear and the draught comes from the frame, insulation and a weatherstripping swap are enough, but fog sealed between the panes means the double-glazed panel has failed and needs replacing, which we can do within one day. We handle urgent glass unit replacement in Aktobe within a single day, at a surcharge to the part itself. Clear glazing that feels cold at the edge usually points to the sash, the weatherstripping or the hardware rather than the glass. Cloudiness that sits inside and never clears is the opposite case: the cavity has taken in moisture and no amount of frame work will dry it out. That fog cannot be wiped away, because the sealed gap has lost its barrier, so re-sealing around a failed panel only hides the fault until the next cold spell.
| Work | Warranty | What it covers |
|---|---|---|
| Repair | 1 year | Labour and replaced parts |
| Glass unit swap | 3 years | The new sealed unit |
| Installation | 5 years | The fitted window |
Five checks decide most window problems before any tool comes out of the bag, so keep them in mind when a draught or a stiff handle appears.
Maintenance frequency, winter preparation, seals, warranty
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionOnce a year is enough, preferably in autumn before the heating season. If the windows are in the kitchen or near a busy street, they may need more frequent care depending on operating conditions.
Professional care should not leave scratches: the technician uses mild products and protective pads. If damage does occur, show it to the technician right after the work — they will assess whether it can be polished or masked.
Yes, we service individual elements as well: we adjust the balcony door, lubricate the hardware, and check the closing pressure and seal. The cost depends on the scope of work and is agreed after inspection.
Check that the sashes close easily and there are no drafts, clean the drainage holes, and lubricate the seal with silicone. If you notice sticking or gaps, it is better to call a technician for adjustment.
Perhaps the sash was pressed too tightly during adjustment or the hardware position was disturbed. Report this to the technician — they will recheck the settings and fix the issue.
Each profile requires its own type of seal: material, groove shape, and climate are taken into account. We replace seals in windows of any manufacturer, selecting the appropriate one by characteristics.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp