Craftsman by a plastic window with double-glazed units in the bedroom
from 1 300 ₸We remove cracks, chips and scratches together with the old unit, leaving the frame and handles untouched.Calculate

Double Glazing Replacement in Aktobe

High floor · Children

Safety glass

Laminated glass cracks on impact but holds on the film. Security film for ordinary glass — from 8 000 ₸ per m².

A technician holds a sample of laminated glass with a film between the layers
GoogleYandex MapsZoon

5,097 reviews on review sites

What is double glazing replacement in Aktobe

A damaged unit is replaced separately from the frame, so the window doesn't need to be removed and the reveals re-finished.

The essence of the work

The panes in a unit are sealed around the perimeter and form a single block. A scratch, chip or crack on it can't be polished out, but the block can be removed from the sash by taking out the glazing beads and a new one fitted exactly to size.

At the same time, it's easy to change the type of glass: instead of ordinary, install laminated for a high floor, frosted for a window facing neighbours, or double-chamber for a bedroom where the steppe frost blows in from outside in winter.

Empty PVC window sash against the wall and removed glazing beads on the floor next to a balcony door
from 19 500 ₸

new double glazing per square metre

3 years

warranty on the installed unit

1 day

urgent replacement with a surcharge to the unit price

Glass
LaminatedFrostedTintedCoatedStandard

How glass replacement in Aktobe is performed

These are the most common requests from owners of apartments, offices and country houses in Aktobe.

A craftsman inserts a white glazing bead into the sash with a rubber mallet
  • 01Need impact protection

    We install laminated glass or apply security film so that on impact shards don't fall down and into the room.

  • 02Deep scratches

    Scratches from abrasives or tools can't be removed by polishing, the technician simply replaces the unit with a new one.

  • 03Chip after renovation

    Hit the glass with a stepladder or a hammer drill? We'll install a new block, the frame and windowsill stay untouched.

  • 04Crack on the balcony

    Balcony units suffer from wind and sash slamming, we replace them the same way as in rooms.

Types of glazing units for replacement in Aktobe

A new unit can be different from the old one: safer, warmer or opaque to views from the street.

Double-chamber

living rooms

White PVC window in winter, a snowy courtyard outside, a floor lamp and a small table beside it

Three panes hold heat in frosty weather and noticeably reduce street noise under the windows.

from 20 000 ₸/m²

Single-chamber

balcony, veranda

White PVC window in a dining room, with an oak table and chairs next to it

A lightweight unit with two panes for spaces without heating, where light is the main thing.

from 12 600 ₸/m²

Energy-saving

corner rooms

White PVC window with an oak windowsill in a sunny room

Coated glass reflects radiator heat back into the room and stays cooler in summer.

from 15 200 ₸/m²

Security film

high floor, kids' room

Hands apply a clear protective film to a window glass with a squeegee

The film on the glass keeps shards from flying if a ball hits the window.

from 8 000 ₸/m²

Tinting

country house, ground floor

A plastic window with tinted glass, houses and mountains visible through the glass

Hides the room from neighbours and softens the sun while keeping the view.

from 5 500 ₸/m²

Double glazing replacement prices in Aktobe

The final amount depends on the glass area and the chosen unit, and is quoted after measuring.

Type of workPrice
Double glazing replacement, per m²base price by areafrom 19 500₸ per m²
Double-chamber double glazingfor steppe frostsfrom 20 000₸ per m²
Single-chamber double glazingbalcony, verandafrom 12 600₸ per m²
Energy-saving double glazingless heat lossfrom 15 200₸ per m²
Broken glass replacementone pane of the unitfrom 8 000₸ per m²
Glass replacement in a plastic doorPVC balcony doorfrom 22 000₸ per m²
Security film for glasssafety at heightfrom 8 000₸ per m²
Window tinting filmwindow privacyfrom 5 500₸ per m²
Additional glazing beads installationreplacement of a broken glazing beadfrom 1 300₸ per item
Sash adjustment with removalafter double glazing replacementfrom 4 000₸ per sash
Window inspection by a technician without repairon-site consultationfrom 3 600₸ per job

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Book a measuring visit

Why customers order glass replacement in Aktobe from us

Terms that apply to every order in Aktobe.

Warranty3 years

we give on the new unit and its installation

Pricein the order

we fix it after measuring, and it does not increase during the process

Urgent replacement1 day

if the window is broken or dangerous, with a surcharge to the unit price

Measuringfree

we take dimensions and help choose glass on site

Paymentafter

installation, in cash, by card or via Kaspi

WhatsApp5 minutes

typical response time to a photo of damaged window

Working daysno days off

we accept requests all week

Coverage17 cities

we work in Aktobe and sixteen other cities of the country

How double glazing replacement is carried out in Aktobe

The workflow from message to finished window.

  1. A hand holds a phone with a dark screen by a plastic window for measuring
    01response in 5 minutes

    Photo of the window

    Take a close-up photo of the damage and the whole window, send it via WhatsApp, and we will advise what fits.

  2. A tape measure measures the sash opening of a white plastic window, only hands are visible
    02free

    On-site measuring

    The measurer measures the glass, checks the profile and glazing beads, and helps choose the glass type and number of chambers.

  3. Hands assemble a glass unit from glass panes and an aluminum frame on a workbench
    03urgent — 1 day

    Manufacturing

    The unit is assembled to your dimensions; in an urgent case we will make and install it within a day with a surcharge.

  4. A new glass unit is installed in a white plastic window sash, clean glass
    04in your presence

    Replacement

    The technician removes the glazing beads, replaces the unit, checks how the sash moves, and only then you pay for the work.

Good to know

Double Glazing Replacement in Aktobe

We handle double glazing replacement in Aktobe as a direct contractor with our own fitters, not a middleman. We measure by the glazing beads, help pick a unit formula for local frost and heat, fit the new unit without removing your frame, and back the work with a 3-year warranty. Measuring is free.

Why a Foggy or Cracked Unit Points to Double Glazing Replacement

A sealed glazing panel fails from the inside out, so the first signs are easy to miss. Here is how to tell a spent pane from a problem the frame itself is causing.

Signs that a sealed unit has reached the end

  • Mist between the panes: condensation sits inside the chambers and never clears, even on a dry day in a heated room.
  • A crack from the edge: a hairline runs inward from the spacer line and opens further with every temperature swing.
  • A cold room with a sound frame: the sashes close and the fittings hold, yet the pane feels chilled to the touch.
  • A cloudy pane: the glazing turns hazy as the desiccant is used up and moisture settles inside the chambers.

Replacing the unit or the whole window

We replace just the glazing whenever the frame, sashes and fittings are still sound, which covers most fogged or cracked cases we see. The old glazing comes out, the rebate is cleaned, new beads and seals go in, and the surround stays where it is. A full window swap only makes sense when the profile itself is warped or the fittings no longer hold, so a fitter should check the surround before anyone quotes a new window. In our practice, a profile that still closes evenly and shows no rot or bend rarely needs replacing. We give a 3-year warranty on glass unit replacement and a 5-year warranty on window installation, so the choice between the two is worth getting right at the measuring stage. Ask for the surround to be tested for square first — that check decides whether you need glazing or a whole new installation.

Measuring a Glass Unit the Right Way for Double Glazing Replacement

The size of a replacement pane is not the size of the opening you see. A few millimetres of error here decides whether the new glazing seats cleanly or leaks from day one.

Why the beads set the size, not the frame

A pane is measured across the glazing beads, the strips that hold the glass in the sash, because that rebate is the exact space the new glazing must fill. The beads sit in a groove in the profile and press the glazing against the gasket, so the distance from one bead line to the opposite one is the only figure that matters. The sash itself is deeper than the glass it carries: on a standard plastic profile the rebate is a fraction of the frame width, and the rest is chambers and reinforcement. Measuring the outer frame instead adds the profile depth to every side, and a pane cut to that figure will not fit back under the beads without forcing the seals. Take three readings per side, top, middle and bottom, and use the smallest: sashes are rarely perfectly square.

The free on-site measuring visit

Our measurer comes at a time that suits you, takes the bead-to-bead sizes on site and helps you choose the formula, glass and fixings, and the visit costs nothing. He checks the sash for square, notes the bead profile and writes the sizes into the order, so the price is fixed after measuring and does not move once the glazing is in production. A double glazing replacement in Aktobe starts with that visit rather than with a phone guess, because a millimetre read wrong over the phone becomes a remake. Booking the measure early in the week leaves room to fit an urgent pane inside a single day if the glass later turns out to be broken rather than just fogged.

Choosing a Unit Formula for Aktobe Weather

Aktobe swings from deep frost to dry summer heat, and a unit that suits a mild climate will underperform here. The formula, not just the glass count, does the work.

Matching chambers and glass to the climate

We match the chamber count and glass type to the side of the building and the room behind it, so a north-facing bedroom and a sun-hit living room do not get the same build. A single-chamber glazing handles a sheltered, average-size window fine, while a two-chamber glazing earns its place where the wall runs cold for months. On the sun-baked facade the coating and the glass choice carry more weight than one more chamber, because the load there is solar gain, not heat loss. We read the orientation, the sill height and how the room is used before writing the formula into the order. A second chamber helps most on the cold side, while on a sun-baked facade the coating and glass choice matter more than adding another chamber.

Energy-saving and tempered glass as options

Options compared by function and the window each suits
OptionWhat it doesBest for
Energy-saving glassReduces heat loss through the paneLarge windows on the cold side
Tempered glassResists impact and breakageLow sills, doors, busy rooms
Extra chamberImproves insulationBedrooms and north-facing rooms
Standard unitCovers everyday needsSheltered, average-size windows

How the Replacement Runs Without Touching the Frame

The frame stays in the wall, the old glazing comes out and the new one goes in. Knowing the order of steps makes it easier to plan the day and clear the space around the window.

Step by step from old unit to new

  • Free the beads: the fitter runs a blade along the glazing beads and lifts them out for reuse.
  • Release the spent pane: suction cups take its weight, and the glass comes out whole.
  • Clean the rebate: dust, old sealant and shards are cleared so the panel sits flat.
  • Seat the panel: our double glazing replacement aktobe goes in on fresh setting blocks, squared up.
  • Refit and reseal: the beads click back, and the edges are sealed against draughts and water.
  • Check the close: the sash opens, closes and locks freely before the fitter signs off.

Winter work and what happens to the old unit

We fit panels through the winter as long as the frame and seals are handled carefully, and we take the spent glass away with us once the fresh pane is seated. Cold stiffens sealant fast, so the fitter keeps the cartridge warm and works the edges in short runs instead of one long bead. The room matters just as much: heating left on for a few hours before the visit keeps the frame near its summer size, and a sash that has shrunk in the frost is easier to reseat once it has warmed. Clear a metre around the window the day before, and move anything fragile out of the swing of the sash. Cold-weather fitting works best when the room is kept warm beforehand, so the seals stay flexible and bond cleanly instead of stiffening on contact.

Warranty, Timing and Payment Terms

What happens after the unit is in matters as much as the fitting itself — the terms decide how a claim is handled and when money changes hands. Below are the warranty, the timing options and the way payment works.

What the warranty covers

Every glazing replacement we carry out comes with a 3-year warranty, and window repair work is covered for 1 year on labour and replaced parts. Window installation, when a whole frame goes in rather than a single unit, carries a 5-year warranty — worth knowing if the surveyor suggests that route instead of a swap. The terms apply to the glazing itself: seal failure, fogging between the panes and defects in the spacer are all covered, not just breakage. Keep the order sheet with the measured sizes, since it records the exact formula fitted and makes any later claim a matter of checking the record rather than re-measuring on site.

Urgent replacement and paying after the work

A broken pane can be made and fitted within one day on an urgent basis, and you pay only after installation by cash, card or Kaspi. The price is fixed in the order after measuring, so the figure agreed at the visit is the figure on the day — no additions for callout, lifting or disposal of the old glazing. Standard slots run on a longer schedule and suit a cracked outer pane that still holds together. Urgent work carries a surcharge on the glazing, so it is worth deciding early whether a cracked pane can wait for a standard slot or needs the same-day route.

What to look at when ordering double glazing replacement

A failed sealed pane rarely means a new window, and a few checks before the first cut decide whether the result holds for years.

  • Fog or a cold draught: mist between the panes, an edge crack or a chilly feel with a sound frame points to the glazing, not the window surround itself.
  • Size at the beads: a new pane is measured across the glazing beads, so the visit decides whether it seats without gaps.
  • Formula for the space: chambers and glass should follow the side of the building and how the interior is used, not one default choice.
  • Leave the frame alone: keeping it in place protects the wall joint and interior finish, and shortens the time on site.
  • Agree terms upfront: confirm warranty and payment before installation starts, and file the order sheet with the recorded sizes.

Questions about double glazing replacement in Aktobe

Double glazing replacement, repair, safety, timelines

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can I replace just the broken glass instead of the whole double glazing unit?

No, a double glazing unit is a sealed block, and a single pane from it is not replaced separately: the seal would be broken and the unit would start to fog up. The entire double glazing unit is replaced as a whole, matching the same specification.

02If the double glazing unit has fogged up inside between the panes, is it time to replace it?

Yes, condensation between the panes means the seal is broken, and the unit cannot be dried out or repaired. It is replaced with a new one, while the frame and hardware usually remain the same.

03What should I do if the double glazing unit cracks in winter—replace it immediately or wait for warmer weather?

It is better to replace it immediately: the crack can spread due to temperature changes, and heat escapes through it. Replacing the double glazing unit is possible even in freezing weather, depending on the window and the weather; the technician will advise on site.

04What glass is safer to install on a balcony where small children play?

For a balcony with children, tempered glass or laminated glass is more sensible: they do not produce large shards when broken. Regular glass is more dangerous when broken, so it is better not to use it for the lower sections.

05Will a double-chamber double glazing unit fit an old plastic frame, or will the profile not hold up?

It will fit if the profile and hardware are in good condition: a double-chamber unit is installed into the existing frame without replacing the window. The thickness and weight of the unit must match the profile; the technician checks this during the free measuring visit.

06Is it really possible to replace a double glazing unit within a day if it is urgent?

Yes, we offer urgent manufacturing and replacement of a double glazing unit within a day, which costs more than a standard order. The exact timeline depends on the size and specification of the unit and will be confirmed after measuring.

Reviews of double glazing replacement in Aktobe

5,0based on 97 reviews on platforms
All reviews