Craftsman by a bedroom window, hand on a lockable handle
from 3 650 ₸ per itemKey-lock handle with fitting. Free measuring visit and consultation, we work seven days a week.Calculate

Lockable Window Handles in Aktobe

Child protection · key

Key-lock handle

Key-lock window handle from 3 650 ₸ per item with fitting: a child cannot turn the sash without the key.

A craftsman stands by a closed white window in a bright room
GoogleYandex MapsZoon

5,097 reviews on review sites

What is a lockable window handle in Aktobe

A mechanism that prevents opening the sash without a key or pressing a button — for families with children and offices.

How it works

A lockable window handle is a standard turn handle with a locking mechanism built into its body. On key-lock models, rotation is blocked until the key is turned; on button models, until the button is pressed and held. From the outside, such a handle looks standard; the difference is noticeable only when trying to turn it without the key or button.

The locking mechanism works together with the sash: while the handle is locked, the turning unit of the hardware remains in the "closed" position. This distinguishes a lockable handle from a blocker, which is installed as a separate part over the handle and only limits its movement. Key-lock handles are fitted to windows in children's rooms, kindergartens and offices where unauthorised opening must be prevented.

PVC window with a key lock at the bottom of the sash and a clear grille behind the glass
from 3 650 ₸

Key-lock handle with fitting per item

2 750 ₸

Window handle replacement, labour per item

1 year

Warranty on window repair: work and replaced components

5 options
With keyWith buttonDouble-sidedReplacementBlocker

How a lockable handle is mounted on a window

The fit depends on the window profile and the length of the spindle — the square rod that transmits the handle's rotation to the hardware.

White window handle with a key lock in its base, close-up
  • 01Spindle and profile

    The spindle is selected to match the profile thickness and hardware type: too short won't reach the mechanism, too long will jam.

  • 02Fixing on the sash

    The handle body is screwed to the sash through the standard holes; when replacing, the centre-to-centre distance must match.

  • 03Non-standard sash

    For a narrow vent or thick profile, the technician selects the spindle length and centre-to-centre distance so the handle fits without play or skew.

  • 04Replacing an old handle

    Window handle replacement — from 2 750 ₸ per item, door handle — from 3 500 ₸ per item; the technician selects a model for your profile.

Mesh types for lockable handle options in Aktobe

Five versions for different tasks: child protection, balcony access from both sides, repairing an old handle and additional locking.

With key

Window · child protection

A craftsman stands by a closed white window in a bright room

The turn is locked with a key: the sash cannot be opened until the key is inserted.

from 3 650 ₸/pc

With a button

Window · kindergarten and office

Brown lockable handle on a wood-effect window

To turn the handle, you need to press and hold the button — a small child cannot do this.

from 3 650 ₸/pc

Double-sided

Balcony door

White handle with a lock on a balcony door, a hand on the lever

A handle on both sides of the door leaf: the door can be closed and opened from both outside and inside.

from 30 000 ₸/pc

Handle replacement

Work · window and door

A craftsman holds a white handle with a button in his hand explaining how the lock works

We replace a broken or loose handle and select a model that fits your profile.

from 2 750 ₸/pc

Lock limiter

Handle accessory

A white window with one handle in a bright corridor

Installed over the handle to restrict turning; an adult can remove it.

from 2 800 ₸/pc

Lockable window handle prices in Aktobe

Price list by handle type and work; the final cost is confirmed by the technician after measuring.

Type of itemPrice
Lockable window handlewith fittingfrom 3 650₸ per item
Window handle replacementlabourfrom 2 750₸ per item
Double-sided handle for balcony doorwith installationfrom 30 000₸ per item
Window handle (product)without fittingfrom 3 400₸ per item
Door handle replacementlabourfrom 3 500₸ per item
Handle rotation blockerwith installationfrom 2 800₸ per item
Penkid lock with cablesetfrom 2 150₸ per item
"Comb" limiter with installationfitting includedfrom 1 050₸ per item
Installation of blocker or child locklabourfrom 2 750₸ per item
Installation of balcony latchlabourfrom 3 750₸ per item

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Book a measuring visit

Why customers order lockable handles from us in Aktobe

Facts about the company: warranty on window repair, free measuring, payment after installation and price fixed in the order.

Experiencesince 2012

We work across Kazakhstan

Repair warranty1 year

For work and replaced components during window repair

Measuring0 ₸

We work seven days a week, taking requests daily from 09:00 to 22:00

Installationincluded

We deliver and install on windows and doors

Paymentafter

We paint the profile in any color to match your windows when doing related window work

Pricefixed

We work without intermediaries, installing and replacing fixings ourselves

Coverage17 cities

You can order in 17 cities of Kazakhstan

Response5 minutes

We reply on WhatsApp within 5 minutes

How we make and install a handle with a key

Four steps from request to checking the handle operation on the window.

  1. A hand holds a phone by a white plastic window, ordering a locking handle
    015 minutes

    Request

    You write on WhatsApp or call: we clarify the window type, floor and task — child protection, balcony door or replacement.

  2. A tape measure measures the opening of a white plastic window before installing a locking handle
    02at a convenient time

    Measuring

    The measurer takes dimensions, checks the spindle, center-to-center distance and hardware condition, and helps choose a handle.

  3. A hand reaches for a screwdriver on a workbench, next to a small white box and screws
    03after measuring

    Price fixing

    The price is fixed in the order after measuring: the estimate shows the handle, work and additional parts.

  4. Installed white handle with a lock on a plastic window sash
    04during installation

    Installation and check

    The technician installs the handle, checks turning, locking and operation of the key or button, and shows the result.

Good to know

Lockable window handles in Aktobe fitted by our craftsmen

We fit lockable window handles in Aktobe, matching each handle to your profile, floor and the job it must do. A free measuring visit comes first, the price is fixed in the order after measuring, and you pay only once the handle is fitted. Window repair work carries a one-year warranty.

What lockable window handles actually do and which type you need

A plain lever only moves the sash, while a keyed fitting also holds it shut. Below we separate the three fittings people actually ask for and the job each one does.

How a keyed handle differs from a plain one

A keyed lever locks the espagnolette, so the sash cannot be turned from the inside without the key. The mechanism sits inside the body: a small cylinder blocks the spindle, and the sash stays shut even if someone reaches the lever. A plain fitting has no cylinder at all — it simply drives the espagnolette and opens for anyone. The lock protects the opening action, not the glass, so it stops a curious child or a casual intruder but is not a substitute for a full window lock system. Fit it on the sash you actually open — a second keyed unit on a rarely touched frame adds cost without real benefit, so one is enough.

Child blocker, keyed lock or opening limiter

three fittings compared by the job each does
TypeWhat it stopsBest for
Child blockerA child turning the leverFamily flats with small children
Keyed lock handleOpening without the keyGround floors and rented flats
Opening limiterFull opening, keeps a gapVentilation with a child in the room

Will lockable window handles fit your window and profile

Compatibility starts with the window you have, not with a catalogue page. The profile, the opening type and the hardware already in place decide whether a keyed unit goes on without rework.

Matching the handle to PVC, aluminium and wooden windows

We fit keyed levers to PVC, aluminium and wooden windows, and we work with the common profiles Rehau, KBE, VEKA and Provedal. On plastic sashes the lever drives the espagnolette built into the sash edge, so a replacement has to match the length of the connecting bar and the screw spacing of that mechanism, and the fitter checks both on site. Aluminium units often use narrower hardware, and timber ones can carry older fittings where the drive pin sits deeper. The deciding factor is the existing locking rail and its drive pin, not the profile brand alone, so two units from the same maker can still need different parts. During the free measuring visit we check the backset, the drive pin and the fixing holes before anything is ordered, which is why a component that looks identical to a neighbour's may not suit your opening.

Do you need to remove the window or change the glass unit

Fitting a keyed lever does not require removing the window or replacing the glass unit, because it works on the locking mechanism that is already there. The old part comes off with two screws, the new one goes onto the same mounting points, and the sash stays in its frame throughout. A glass unit is only touched when it is cracked or misted, which is a separate job from a fitting swap. If the existing rail is worn or the connecting bar is the wrong length, the measurer spots it during the appointment and the fix is a component swap, not a new window. That keeps the work to a short site appointment and leaves your glazing and frame untouched.

Keeping a child safe and the flat secure with lockable window handles

Most people lock a window for one of two reasons: a small child in the flat, or a ground-floor room where an open sash feels like an invitation. Both cases are simple to solve, but they need different hardware.

Locking a window so a child cannot open it

For a child we recommend a blocker or a keyed fitting so the sash stays shut, and the key or release stays with an adult. A blocker is a small separate fitting that stops the lever from turning past a set point, while a keyed unit simply will not move without its key. Both leave the everyday lever usable for an adult and stop a child from swinging the sash wide open. We supply the blocker as a separate part, so it can go onto a window that already has a plain lever. The safest setup lets the window open a little for air while the wide opening stays locked, so a child gets ventilation without access to the full opening. Ask for the tilt-first position to be kept free — that small gap is what makes a secured window livable in summer.

Ground-floor flats and protection against break-in

On a ground floor a keyed lock handle raises the effort needed to open the sash from outside, but it works together with the window's own locking points rather than replacing them. The lever turns the espagnolette — the bar of hooks and cams running down the sash edge — and if those points are worn or misaligned, a locked unit adds little. That is why the measurer looks at the existing hardware first: the cam height, the condition of the strikers, whether the sash pulls tight when you turn the handle. A keyed lock is only as strong as the espagnolette it drives, so on older windows the measurer checks the locking points before promising break-in resistance. If the fittings are sound, the keyed handle is a sensible extra layer on the ground floor of any block in the city.

The free measuring visit and how the handle is fitted

The order starts with a free measuring visit at your home. The measurer takes sizes, checks the existing fittings and picks the fixings, and the price is fixed in the order after the visit.

What happens on the measuring visit

The measurer comes at a time that suits you, takes the sizes, checks the existing fittings and helps you choose the unit, the release type and the fixings for your profile and floor. He looks at the sash, the frame and the spindle, then matches Z-brackets, plungers or magnets to the window profile and the storey. If you are fitting a lockable window handle in Aktobe, this is also the moment to confirm the keyed or limiter version and the colour of the cover plate. Measuring and consultation are free, and because the price is fixed in the order after measuring, you know the final figure before any work starts.

Fitting the handle and paying afterwards

The fitter installs the unit in a single visit, checks that the sash closes and locks cleanly, and you pay after installation by cash, card or Kaspi. He tests the key turn, the limiter travel and the spindle engagement, then adjusts the mechanism on the spot if the lever sits stiff or the sash does not pull in tight. The same visit can cover a balcony door as well as a window, so one booking handles both openings. Because payment comes after the work, any adjustment to the mechanism happens before you settle — nothing is left for a second trip.

Warranty, service life and repairs when a handle jams

A window fitting lasts for years with simple care, but the mechanism can jam or fail over time. Here is what the warranty covers, how to keep it smooth and what we do when it stops working.

What the warranty covers and how to keep the mechanism smooth

Window repair work and replaced parts are covered by a one-year warranty, and a light clean of the locking gear a couple of times a year keeps the key turning freely. That cover applies to our labour and any part we fit, whether it is a new unit, a spindle or a set of fasteners. Care takes minutes: a soft brush along the moving parts and a drop of silicone spray on the cylinder, never oil that traps grit. Most jams come from dust in the moving parts rather than a failed lock, so a quick clean often restores the fitting without a replacement. In our practice, fittings that seize after a dusty summer turn freely again after a five-minute clean.

Repair or replace a handle that spins or jams

When a fitting spins, jams or the sash stops closing, we check the lever, the spindle and the espagnolette, then repair or replace the failed component rather than the whole window. A worn shaft is the cheapest fix, a stripped fitting needs a swap, and a stiff espagnolette calls for adjustment of the existing window hardware. We carry common sizes on the van, so many jobs are finished on the first visit, and we replace fastenings at the same time if the old ones are loose or corroded. A lever that turns but does not lock usually points to the espagnolette, while a loose one is often just a worn spindle, so the diagnosis decides whether a swap is enough. Ask for the shaft to be checked whenever a part is replaced, since a new unit on a worn shaft loosens again within weeks.

What to know before replacing lockable window handles

Five points below sum up what decides a good fit, from matching the fitting to the job to acting on a jam before it spreads.

  • Match the fitting to the job: a child blocker, a keyed lock and an opening limiter solve different problems, so pick by the risk you are covering.
  • Inspect the espagnolette and spindle: the profile brand alone does not decide whether a new fitting goes on, so check the existing hardware first.
  • Leave the sash alone: a keyed unit works on the gearing already in place, so the frame and the glazing stay untouched.
  • Book the measuring visit: the fitter matches fixings to your profile and floor, and the price is fixed in the order before work begins.
  • Act early on a jam: a gritty lock or a spinning lever is cheaper to sort while the shaft is only worn, not seized.

Questions about lockable window handles

Selection, compatibility, installation, care

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Will a lockable handle fit my KBE, Rehau or VEKA window profile?

Compatible lockable handles are usually available for popular KBE, Rehau and VEKA profiles. But exact compatibility depends on the specific window model and hardware, so it's best to confirm during the free measuring visit.

02Can a lockable handle be installed on a balcony door and is a double-sided one needed?

Yes, a lockable handle can be installed on a balcony door. A double-sided handle is needed if the door is used from both sides or if there are small children; otherwise, a single-sided one is sufficient.

03What is the difference between a lockable handle and the Penkid child safety lock in terms of how they work?

A lockable handle locks the sash itself with a key, while Penkid is a cable lock that prevents the window from being opened. Reliability depends on the installation method: a keyed handle is more convenient for daily use, and Penkid is often chosen as an addition.

04Who in Aktobe replaces window handles with locks and provides on-site service?

Our technicians in Aktobe replace lockable handles — they come to your home, take measurements and install the handle. You can leave a request by phone or WhatsApp, and we will respond within 5 minutes.

05How to care for a lockable handle so it doesn't jam?

Periodically wipe the handle with a soft cloth and lubricate the locking mechanism with a special lubricant (e.g., silicone). Do not use abrasive products and avoid dirt getting into the keyhole — this will make the handle last longer.

06What can I check myself to see if a handle will fit my window?

Look at the profile marking (usually indicated on the sash) and measure the distance between the fixing holes. If there is no marking, it's better to call a technician for measuring — they will select a compatible model.

Reviews of lockable window handles in Aktobe

5,0based on 97 reviews on platforms
All reviews