For all windows
We install the same protection on every sash of a house or apartment in one visit. Installation — from 2 150 ₸ per item.


For all windows
We install the same protection on every sash of a house or apartment in one visit. Installation — from 2 150 ₸ per item.

Door stopper
Keeps the door slightly open, it doesn't slam and won't pinch your pet. From 1 200 ₸ per item.

Stopper
Limits the movement of the aluminum sash in the track. Price — from 4 000 ₸ per item.

For wood
Model with fixings for wooden profile and matching the frame color. Product — from 2 000 ₸ per item.

Replacement
We replace cracked and loose limiters with new ones. From 1 200 ₸ per item.

5,097 reviews on review sites
So the window ventilates the room but doesn't open wider than a safe gap
In summer Atyrau is hot, and windows are often left open at night with a mosquito screen covering the opening. The screen doesn't hold the weight of a child or a cat, but the limiter does: the sash stops against it and goes no further.
Only adults remove the protection to wash the glass or take off the screen for winter. For each window we select a model: push-button, cable, comb, or stopper for sliding frames.

comb with installation per sash
measuring and selection of fixings
we accept requests every day
The screen protects from mosquitoes, but only a limiter saves you from these four situations

Children lean on the screen as if it were a wall. The stop leaves a gap, and the child can't open the sash wide.
The sash is kept open until morning. The comb prevents it from swinging open in the wind.
A pet can push out the screen. A narrow gap with a stop won't let it fall out.
In a kindergarten or office, only staff open the windows: we install a cable with a lock.
Prices per sash or door; we'll give the total for the house after measuring
| Type of item | Price |
|---|---|
| Comb limiter with installationfor night ventilation | from 1 050₸ per item |
| Installation of opening limiterwork on the sash | from 2 150₸ per item |
| Cable limiter with lockkey included | from 2 500₸ per item |
| Opening limiter (product)push-button model | from 2 000₸ per item |
| Limiter replacementbroken to new | from 1 200₸ per item |
| Penkid lock with cablecable lock | from 2 150₸ per item |
| Blocker for sliding windowsbalcony stopper | from 4 000₸ per item |
| Sash blockerdraft stopper | from 1 200₸ per item |
| Child window lock (surface-mounted, flag)surface-mounted, with flag | from 3 250₸ per item |
| Installation of blocker or child lockinstallation and check | from 2 750₸ per item |
| Window handle with keylockable handle | from 3 650₸ per item |
Price is fixed after measuringMeasuring and consultation are freePayment after the work: cash, card, Kaspi
Book a measuring visitHow we work on every order
we work across Kazakhstan
we answer on WhatsApp
we come, inspect, and select
we fix it in the order after measuring
fitting: cash, card, Kaspi
from 09:00 to 19:00 every day
as well as aluminium sliding
cities of Kazakhstan with our work
All in one visit after measuring

Write on WhatsApp how many windows you have and whether there are mosquito screens. We'll reply and suggest a time.

We inspect the profile, screens and hardware, show the models and give the sum that will go into the order.

We fit the limiters and replace old ones if needed. We check that the screen and sash don't interfere with each other.

We open each window to the stop, show you how to remove the protection, and only then take payment.
Good to know
We fit window restrictors in Atyrau on windows that are already in place, using our own fitters rather than subcontractors. A free measure comes first, the fitter matches the fixing to your profile and floor, and you pay only after installation by cash, card or Kaspi. We work seven days a week and reply on WhatsApp within five minutes.
A restrictor is a part that stops a sash swinging wider than a set angle while leaving the window open for air. Listings in Atyrau blur four different devices together, so we separate them below.
| Device | What it stops | Keeps ventilation | Access for washing |
|---|---|---|---|
| Window restrictor | Sash opening past a set angle | Yes | Yes, via tilt |
| Cable blocker | Sash opening past tether length | Yes | Yes |
| Handle lock | Handle turning at all | No | No |
| Window grille | The whole opening, from outside | Yes | Limited |
Local listings mix "restrictor", "blocker", "fixator" and "child lock" for parts that behave very differently, so the label on the box tells you little about what the part does. A rigid turn limiter pins the leaf at a chosen position and holds it there; a cable blocker lets the leaf travel only as far as its tether allows before it pulls tight. A handle lock only stops the handle from turning, which means it guards nothing once the sash is already open. A grille shuts the whole opening from the outside and is the only one of the four that works when the glass itself is the risk. Ask what the part physically prevents — the sash opening, the handle turning, or the opening being reached — and the correct type names itself.
The type of sash, the profile material and the floor decide which device suits your window. Here is what changes for a turn-only sash, a tilt-and-turn one, timber, aluminium and upper floors.
A turn-only leaf needs one limiter on the opening stroke, while a tilt-and-turn unit needs the tilt and the turn handled separately, and in most cases we fit onto the existing hardware rather than replacing it. On a turn-only leaf the arm or cable stops the leaf at a set gap on the single swing axis, so one device covers the whole opening. A tilt-and-turn unit has two axes: the turn side swings wide, the tilt side leans back at the top, and each needs its own stop or a combined kit rated for both. We check the hinge side, the handle side and the tilt arm before choosing the part, because a bracket made for a swing leaf will not hold a tilting one.
We fit window restrictors on PVC, wooden and aluminium windows, and the measurer chooses the fixing to suit the profile and the floor rather than using one bracket everywhere. On PVC the frame takes self-tapping screws into the reinforcement behind the wall of the profile; on timber the screw bites into solid wood and holds without extra anchors; on aluminium the thin chamber often needs a rivet or a bracket that spreads the load across the profile face. The measurer visit settles this on site: Z-shaped brackets for a deep rebate, pins where the sash sits close to the frame, magnets where drilling is unwanted. On a high floor the fixing carries more consequence than the device, so the bracket-to-profile match matters more than the restrictor model itself.
Falls from open windows make the news every warm season, yet the practical answer rarely sits beside the story. Here the question moves from alarm to a concrete device matched to the age of the child.
For a toddler the priority is stopping the leaf from opening wide at all, so we start with a restrictor that leaves only the ventilation gap and check the tilt side as well. A small user cannot reach a handle mounted high, but a low sill and a fully open turn position are a different matter — that is where a cable or arm limiter earns its place. On tilt-and-turn units the upper stroke also needs a stop, since a leaning body can push against the top gap. We fit these parts on finished units without touching the glass unit, and the measurer confirms leaf weight and profile before anything is drilled. A device rated for a child's weight is only half the answer — the bracket fixing into the profile is what actually holds under a lean, which is why the measure comes before the choice.
Measuring and consultation cost nothing: a specialist comes when it suits you, takes the sizes and helps pick the fixing. Our own fitters install on the sashes already in place, and you pay only after the work is done.
You message us on WhatsApp, we reply within five minutes, the surveyor visits at a time that suits you, and the fitter installs on the existing leaves — often several in a single trip. We work seven days a week, so a Saturday slot is as normal as a weekday one. The specialist checks the profile, the opening type and the floor before choosing between Z-brackets, plungers or magnets, because the same leaf on a fourth floor and at ground level takes different hardware. Measuring and consultation stay free at every stage, including a second visit if a sash turns out to need another bracket. Booking the survey for all the openings together shortens the whole job, because the fitter matches every one to the same fixing logic instead of re-deciding each time.
We also fit on balcony door leaves, the price is fixed in the order after measuring, and you pay once the work is finished by cash, card or Kaspi. A balcony leaf takes a different bracket from a narrow turn-only opening, and the surveyor settles that on site rather than from a photograph. The same trip covers the whole flat if you want window restrictors atyrau on the kitchen, the bedroom and the balcony door in a single pass — the fitter works through them in one run. Fixing the price after the measure rather than before means the bracket and device are chosen on the actual profile, not guessed from a photo, so what you agree in the order is what you pay once the last unit is done.
A restrictor stays on the window all year, so the questions that matter later are practical ones: how you clean the glass around it, how it behaves in winter, and what to do if the sash begins to stick.
A restrictor stays on through winter and does not need removing, and the tilt position still gives access for washing the glass from inside. On a turn-only leaf the device limits the opening angle rather than blocking it, so you reach the outer pane by tilting or by releasing it for the few minutes it takes. Winter is where the ventilation mode earns its place: a sash cracked to the restricted position moves air without swinging wide in a gust, and the frame fixing never has to come off the profile. The part that wears is the moving joint, not the frame fixing, so a yearly check of the joint is enough to keep the sash closing cleanly — a drop of silicone spray in autumn covers it.
Our window repair work carries a one-year warranty on labour and replaced parts, and if a fitted leaf starts to stick we look at the joint and the fixing before anything else. That warranty sits alongside the five-year cover on installation and the three-year cover on glass unit replacement, so a restrictor that pulls the sash out of line is handled as repair work rather than a separate claim. A leaf that stops closing after fitting is usually a joint that has shifted, not a failed device, so the first visit is a check rather than a replacement. Message us on WhatsApp and we reply within five minutes, seven days a week, and the same visit can re-set the fastener or swap the joint.
A short recap of what decides whether a restrictor actually does its job, so the visit and the order go smoothly.
Restrictors, installation, child safety, balcony doors
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionFor a rented apartment, the free measuring visit will help you choose the right restrictor for your window. Whether drilling is needed depends on the model and profile. If it's important not to damage the profile, mention this during the measuring visit.
Yes, for balcony doors there are models with multiple locking positions. They allow ventilation and prevent the door from opening wide.
Cable locks with a key are designed for a child's weight and sudden load, while a standard comb may not hold. For a child's room, it's better to choose reinforced options with fixing into the frame, not just the sash.
A restrictor is simpler and doesn't block the view, but it doesn't stop a child from reaching an open sash. Window grilles are more reliable on the outside, so in a child's room a restrictor is often combined with grilles.
The installer considers the profile material, the sash opening method, and the floor level. For high floors and wide sashes, they will suggest more durable models with additional fixing.
Some models can be installed on an existing window without replacing the hardware — fixing is done to the frame or surface-mounted. Whether drilling the profile is needed depends on the model. The free measuring visit will help choose an option for your profile.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp