Window insulation
Sealing along the sash contour, price from 4 200 ₸ per linear meter. Eliminates drafts from gaps.


Window insulation
Sealing along the sash contour, price from 4 200 ₸ per linear meter. Eliminates drafts from gaps.

Window painting
Sanding and painting the frame, price from 8 100 ₸ per window. Restores wood protection.

Glass replacement
Broken glass replacement, price from 8 000 ₸ per m². We select glass to fit the glazing bead.

Glazing bead replacement
New glazing bead holds the glass in the frame, price from 16 000 ₸ per job. We adjust it to the groove.

Hardware
Replacement of handles and hinges, price from 1 150 ₸ per unit. The sash closes tightly again.

5,097 reviews on review sites
Restoration of frame, sash and glass on site instead of replacing the entire unit.
Wooden window repair is the restoration of the existing frame and sashes: contour insulation, sanding and painting, replacement of glass, glazing bead and hardware. It works as long as the wood holds its shape and the frame geometry is not compromised.
A master visits the address, inspects the window and proposes the scope of work. Warranty on window repair is 1 year for work and replaced components. Master's visit and inspection is 3 600 ₸ per job.

warranty on work and components
master's visit and inspection
window painting per window
Four stages on site: from frame inspection to replacement of damaged wood section.

The master checks the sash, glazing bead, glass and hardware, finds the source of drafts and squeaking.
The sash is removed, the swollen edge is trimmed and adjusted to the opening so it closes without effort.
Cracked glass is removed, new glass is installed and fixed with glazing bead around the perimeter.
The master checks hinges, handles and locking mechanisms, lubricates and adjusts their movement.
Five repair directions with unit price: from contour insulation to hardware replacement.
Swedish technology · linear meter

Sealing the sash contour around the perimeter to eliminate drafts from frame gaps.
Sanding and painting · window

Removal of old coating, sanding the wood and applying a new layer of paint to protect the frame.
Broken glass · m²

Selection of glass to fit the glazing bead and frame groove, careful installation instead of cracked pane.
Glass fixing · job

New glazing bead holds the glass in the frame and covers the gap between glass and wood.
Handles, hinges · per unit

Replacement of worn handles and hinges so the sash closes tightly and without squeaking.
Prices are per job and per unit; the final amount is fixed in the order after measuring.
| Type of work | Price |
|---|---|
| Wooden window restoration (sanding, painting) | from 18 000₸ per m² |
| Wooden window painting | from 8 100₸ per window |
| Wooden window frame repair | from 16 000₸ per job |
| Wooden window repair and insulation | from 28 000₸ per window |
| Wooden balcony block repair | from 53 500₸ per unit |
| Wooden window hardware replacement | from 1 150₸ per unit |
| Wooden window insulation using Swedish technology | from 4 200₸ per linear meter |
| Installation of inter-frame seal | from 2 800₸ per window |
| Broken glass replacement | from 8 000₸ per m² |
| Master's visit and inspection | from 3 600₸ per job |
The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi
Check repair costFacts about our work: warranty, visit, payment and materials.
for work and replaced components
a master will come and assess the scope of work
cash, card or Kaspi
we accept requests without days off
painting the profile and selecting a seal to match the color and profile of any manufacturer's window
after measuring, with no extra charges during work
we reply within five minutes
for replacement of double glazing
From request to completion.

You write on WhatsApp, describe the window problem. We reply within 5 minutes and agree on a time.

A master arrives, inspects the frame and sashes, takes measurements and suggests the scope of work.

Insulation, sanding and painting, replacement of glass, glazing beads or hardware — on site.

You check the sash movement, tightness of fit and absence of drafts. The master answers questions about the completed work.
Good to know
Centre Okon handles wooden window repair in Atyrau as a direct contractor with its own craftsmen, not through middlemen. We start with a free measuring visit, diagnose the frame and sashes, then fix draughts, sagging, seals and glazing. The price is fixed in the order after measuring, and repair work carries a one-year warranty.
In an older timber house the sashes dry out and the paint cracks. Here is how to read the condition of the wood and sashes and decide whether fixing is worth it.
| What to check | What a sound window shows | Repair outlook |
|---|---|---|
| Frame corners | Tight joints, no gaps | Repair holds |
| Lower rail and sill | Firm wood, dry to touch | Seals and hardware |
| Sashes in the rebate | Sit square, open freely | Adjust and rehang |
| Seals, glazing, paint | Worn, wood still solid | Service parts only |
We advise replacement when the frame is rotten through, the geometry is out of square, or the repair bill would approach the cost of a new unit. Rot rarely stays in one spot: it travels along the lower rail, where condensation collects through the cold months, softening the timber from the inside while the paint still looks intact. A single rotten section can sometimes be spliced, but if decay runs along the whole lower rail, splicing only postpones the problem by a season or two. The same applies to a frame twisted so far that the sashes no longer close against the seal. Wooden window repair atyrau owners ask us for is often exactly this decision, and we say plainly when new wood is the cheaper route over five years.
Draughts around the edge of a closed panel are the most common complaint on older timber windows. We look at where cold air enters and what closes it for good.
We fit seals rated for heat and dust, because here a gasket that hardens in summer stops sealing long before it wears out. Our fitters carry profiles that suit the groove of KBE, Rehau, VEKA and Provedal systems, so the new gasket seats without trimming the timber or gluing it in place. Dust is the second enemy: a gritty seal abrades against the panel every time it closes, so we clean the groove and check the drainage slots before pressing the new profile home. A seal that feels firm and springy when pressed is doing its job; one that stays flattened has lost its memory and will let air through within a season.
A sagging sash is usually a hardware and hinge problem, not a wood problem, and we re-hang and adjust it rather than replacing the panel. Worn hinges get swapped, the panel is set back square in the opening, and the rebate is checked so the gasket meets the frame evenly on all four sides. On older units the screws often sit in softened material, so we move them to fresh wood or fit longer ones that bite into solid stock. If the panel catches only in humid weather and frees up in dry spells, the wood is swelling seasonally — adjusting the hinges alone will not hold, and the rebate needs easing as well.
A repair begins with a measuring visit and a diagnosis, not with a tool. Below is the sequence of steps and what gets agreed and written down before anything starts.
Our measurer comes at a time that suits you, takes the sizes, checks the frame and sashes, and helps choose the gasket, hardware and glazing before anything is booked. The visit costs nothing and covers wood, plastic and aluminium frames, including sashes and small vent windows. The measurer notes how the sash sits in the frame, where the timber has dried out, and which fasteners the existing profile will take. You do not need to remove anything beforehand. Ask the measurer to show you where the draught is entering while the window is still in place — it is far easier to agree on the scope on site than to argue about it afterwards.
| Stage | What happens | What gets fixed |
|---|---|---|
| Measuring visit | Sizes and faults checked on site | Scope of repair |
| Diagnosis | Sash, gasket and frame assessed | Parts to replace |
| Order | Agreed items written down | Final price |
| Repair day | Agreed items carried out | Replaced parts listed |
Repair work and the parts we replace carry a one-year warranty, and a replaced glass unit carries a three-year warranty. The cover applies to labour and to every component we fit, whether that is a sealing strip, a hinge, a fastener or a section of timber. If a sash starts catching again or the draught protection pulls away within that period, we come back and put it right under the same terms. Keep the order that lists the replaced items — a warranty is only as good as the record of what was actually changed, and it makes any later claim straightforward.
Keeping the original timber and fitting modern glazing into it is a common request here. It works, but only when the frame is checked properly first — here is what decides it.
A glass unit can go into an old wooden frame when the rebate is deep enough, the timber is straight, and the wood around the glazing is sound. The rebate must swallow the full unit thickness plus the beads, so a shallow rebate on a thin sash rules the swap out. Straightness matters just as much: a sash twisted over decades will pinch a rigid unit and crack the seal within a season. Rot in the lower rail or around the putty line is the usual deal-breaker, because new glazing cannot be fixed to soft timber. A heavier unit loads the frame differently, so hinges and rebate depth must be checked before the unit is ordered.
We re-seat the glazing, renew the putty line and beads, and check that the sashes still close cleanly once the new unit is in. The old beads almost never go back on: we cut new ones to the actual rebate rather than the nominal one, because the timber has moved since the window was built. Hinges get a look at the same visit — a sealed unit weighs more than the single pane the sash was balanced for, and a tired hinge shows up as a sash that drops at the handle corner. A new unit in an old opening will show up every weakness in the rebate, so the beads are replaced rather than reused. On our repairs the labour and the parts we fit carry a one-year warranty.
Preparing for winter also means keeping the wood in condition so it does not dry out and open gaps. Here are the seasonal jobs and care that matter most.
Paint protects the wood from drying and cracking, and a window needs repainting once the old coat starts to flake or chalk, not on a fixed calendar. Bare or checked sections on the south side take the most sun and age fastest, so inspect those sashes first. Sand the surface, dust it off and apply a primer that soaks into the grain, then let each layer cure fully. Paint applied over damp wood traps moisture and blisters within a season, so the surface has to be dry to the touch before the first coat goes on. Between repaints, wipe the frames and keep the drainage channels clear.
A window rarely needs replacing the moment it starts to misbehave. The short list below sums up what decides between a repair and a new unit.
Double glazing, seal, treatment, insulation, restoration, mosquito screen
Konstantin Selenenkovsenior mosquito screen specialist, 10 years in the tradeOnline · replies within 5 minutes
Ask a questionYes, in a wooden window usually only the double glazing is replaced, while the frame and sash stay. The technician removes the glazing bead, takes out the old glass and installs the new one if the wood itself is sound.
An elastic seal is used on wooden windows, pressed by the sash to prevent draughts. Its service life depends on the window and conditions, usually it lasts several seasons, then it loses its elasticity.
The wood is cleaned, sanded and coated with a protective compound, then with exterior paint or varnish. This closes the pores against moisture and extends the life of the frame, especially with temperature changes.
If the sashes close with effort, gaps appear or the paint peels, but the wood is sound, restoration will help. When the frame is affected by rot or warped, replacement may be more reasonable.
Yes, insulation is done without replacing the windows: the seal is renewed, the sashes are adjusted, gaps are filled and, if necessary, an additional contour is added. This reduces draughts and preserves the frame itself.
Many works are done in cold weather too: adjusting sashes, replacing hardware and the seal. Painting and puttying the frame are better left for warmer weather, because the compounds dry poorly in frost.
Thank you. We will call you back within 10 minutes!
Your order number is on the receipt or in the SMS. Choose where to leave your review.
Write a review on WhatsApp