Craftsman adjusting the sash of a plastic window with a screwdriver
from 3 000 ₸ per sashSash adjustment in one visit, technician call-out and inspectionCalculate

Window Repair in Atyrau

Draught under the sash

Compression adjustment

We will tighten the compression and replace the seal if it is worn. Work from 3 000 ₸ per sash.

Technician holds a roll of grey rubber seal, showing it for replacement
GoogleYandex MapsZoon

5,097 reviews on review sites

What window repair in Atyrau includes

Diagnostics, adjustment, replacement of components and sealing — for one task

How the service works

Window repair starts with diagnostics: the technician checks the sash compression, the condition of the seal, hinges and hardware. Based on the inspection, they suggest adjustment or replacement of worn parts, not just installing new ones.

The work includes sash adjustment, replacement of handles, hinges, seals and double glazing, sealing of drip rails and windowsills. The technician selects fixings and components for your window profile so the mechanism works without distortion.

Technician in a dark blue T-shirt with a hex key at an open white PVC window sash
1 year

Warranty on window repair and replaced components

09:00–22:00

We work seven days a week, in Atyrau — according to the city schedule

5 minutes

Response on WhatsApp within five minutes

What we repair
AdjustmentSealHardwareDouble glazingDrip rail

How window restoration is performed in Atyrau

Four self-check steps to help you describe the problem to the technician

Close-up of an L-shaped hex key in the trunnion on the edge of an open white PVC window sash
  • 01Check the locking pins and strike plates

    Inspect the pins on the sash end and the strike plates on the frame: signs of rubbing, shiny metal and handle play when closing indicate that the compression has weakened and the hardware needs adjustment.

  • 02Compare the sound and marks around the sash

    Whistling in the wind, condensation streaks around the sash and scuff marks on the frame point to hardware or compression, while ice and damp only in the corners point to a cold bridge in the reveal.

  • 03Check the hinges and the sash

    If the sash catches the frame or sags, the hinges and hardware need adjustment.

  • 04Check the double glazing

    Cracks in the glass or condensation between the panes mean the double glazing needs replacing. Ask the technician for the cost of this work.

Types of window faults and parts we fix in Atyrau

Five common jobs with a price per unit: adjustment, seal, hardware, double glazing, windowsill and sill

Adjustment

Simple or with sash removal

A craftsman holds an L-shaped steel hex key for adjusting hinges

Tightening the seal and aligning the sash without replacing parts.

from 3 000 ₸ per sash

Seal

For windows of any manufacturer

Technician holds a roll of grey rubber seal, showing it for replacement

Replacing worn rubber around the sash or frame.

from 1 000 ₸ per linear metre

Hardware

Repair or full set

A craftsman holds a new white plastic window handle for replacement

Restoring the mechanism or replacing the hardware on the sash.

from 7 800 ₸ per job

Double glazing

Urgent — within 24 hours

A craftsman holds a small square double-glazed unit sample for replacement

Replacing the double glazing or broken glass with removal of shards.

from 19 500 ₸ per m²

Windowsill and sill

With sealing

A craftsman holds a roll of gray mosquito netting for repair

Installation of a PVC windowsill and sill to protect against leaks.

from 3 250 ₸ per linear metre

Window repair prices in Atyrau

The cost depends on the type of work and components; the technician gives the exact amount after inspection.

Type of workPrice
Call-out and inspection by a technicianwithout ordering a repairfrom 3 600₸ per job
Simple sash adjustmentwithout removing the sashfrom 3 000₸ per sash
Complex adjustment with sash removalwith removal and reinstallationfrom 4 000₸ per sash
Window handle replacementmatched to your hardwarefrom 2 750₸ per item
Hinge replacementwith sash adjustmentfrom 4 750₸ per item
Hardware repairwithout replacing the full setfrom 7 800₸ per job
Sash hardware replacementfull setfrom 10 000₸ per sash
Seal replacementfor windows from any manufacturerfrom 1 000₸ per linear metre
Double glazing replacementurgent — within 24 hoursfrom 19 500₸ per m²
Broken glass replacementwith shard removalfrom 8 000₸ per m²
PVC windowsill installationwith sealingfrom 5 500₸ per linear metre
Drip rail installationleak protectionfrom 3 250₸ per linear metre
Mosquito screen repairwith fixings replacementfrom 2 500₸ per item
Air vent installationfor ventilationfrom 6 000₸ per item

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Ask about repair costs

Why customers order window fixing from us in Atyrau

Facts about the service: warranty, schedule, payment and our own production

Repair warranty1 year

For work and replaced components

Double glazing warranty3 years

For double glazing replacement

ScheduleNo days off

We work daily, in Atyrau — 09:00–19:00

PaymentAfter work

Cash, card or Kaspi

Price fixationin the order

The price is fixed after measuring

WhatsApp response5 minutes

We reply within five minutes

Measuring and consultationFree

The measurer will come at a convenient time

Coverage17 cities

You can order in 17 cities of Kazakhstan

How window repair is carried out in Atyrau

Four steps from request to acceptance of work

  1. A hand holds a smartphone with a dark screen near a white PVC window
    015 minutes

    Request

    Describe the problem on WhatsApp — we will reply within five minutes and agree on a time.

  2. A tape measure measures the lower edge of the window opening of a white PVC window
    02At a convenient time

    Inspection

    The technician will come, inspect the window and, based on the inspection, agree the scope of work and components with you.

  3. A removed white window sash on a workbench next to a coil of new black seal
    03After measuring

    Work

    The price is fixed in the order after measuring, then the technician performs the repair on site.

  4. A finished white PVC window with a new seal and handle, the sash closed evenly
    04Upon completion

    Acceptance

    Check the movement of the sash, the seal around the perimeter and the operation of the handle.

Good to know

Window Repair in Atyrau with Our Own Crews

We handle window repair in Atyrau with our own crews, not through middlemen. We adjust sagging sashes, replace worn seals on windows of any brand, swap glass units (urgently within a day) and stop draughts around the frame. Every repair carries a 1-year warranty on labour and replaced parts, and a 3-year warranty on glass unit replacement.

Window Repair or Replacement and How to Read the Signs

Most units that "stop working" don't need replacing — they need the right fix. Here is how to tell which symptom points to which job, and where the line between repair and replacement actually sits.

Why a Window Draughts Even When It Is Shut

A draught around a closed unit almost always comes from a compressed seal or a sash that no longer presses evenly against the frame, not from a broken assembly. The rubber gasket flattens over years of heat and frost, and once it loses its rebound the leaf can sit perfectly shut and still leak air. The same effect appears when the hardware no longer pulls it in tight: the handle turns, the lock engages, but pressure on the gasket stays uneven, so cold slips through. Run a hand around the perimeter on a cold day — if the chill concentrates at the hinge side or corners, the seal has flattened there and adjustment alone won't close the gap. A fresh strip is the cheaper first move; only if it still leaks is the geometry the real culprit.

When Adjustment Is Enough and When the Sash Needs More

We adjust a sagging sash that catches the frame in most cases — the hardware has simply shifted, and re-hanging it on the hinges restores a clean close without touching the profile. If it catches only at the bottom corner, a hinge has dropped; if it catches along the whole side, the opening itself may have moved and adjustment won't hold. For window repair atyrau residents ask us about, the honest test is whether the leaf returns to square after the hinges are reset — if it does, the job is done in a single visit, with the fittings tightened, lubricated and checked at every locking point. If it springs back out of line, the defect sits deeper, and no amount of tightening will keep it straight. Ask the technician to show the leaf closing evenly before they pack up.

Repair or Replace a Whole Window

A unit is worth replacing only when the frame itself is warped, rotten or cracked through — if it is sound, adjustment, a new seal or a fresh glass unit solves the problem for a fraction of the work. Warping shows up as a leaf that won't sit flush no matter how it is adjusted, gaps that open and close with the seasons, or corners you can rock by hand. Rot in timber is different again: soft spots near the sill mean the wood has taken on water, and patching rarely lasts past a wet spring. The clearest test is whether the opening still sits square; a square structure with tired hardware is a repair, a twisted one is a replacement. On aluminium and plastic profiles, a cracked weld at the corner is the case where replacement wins.

What We Actually Fix During Window Repair

Four jobs cover almost every call we take. Each one has its own trigger, its own part and its own result — and knowing which one your unit needs is half the repair.

Adjustment, Seals, Glass Units and Draughts Side by Side

Symptom-to-job map of four standard window repairs
Repair typeTrigger symptomWhat we replace or adjust
Sash adjustmentSash catches, drags or won't close flushHinges and hardware re-hung
Seal replacementDraught around the perimeter, cold at cornersWorn gasket on any window brand
Glass unit swapCracked, misted or fogged paneThe glazed panel only, frame stays
Draught fixCold air at frame edgesGasket plus sash pressure together

Why We Replace Seals on Any Window Brand

We change the gasket on units of any manufacturer, including KBE, Rehau, VEKA and Provedal, so a tired strip never forces a full replacement. This flexible band runs around the sash; over years of heat, frost and dust it flattens, hardens and stops springing back. In Atyrau the wear runs faster than in cooler regions, because summer heat and winter cold alternate hard and the rubber loses elasticity at both ends of the cycle. We fit a new strip cut to the profile, clean the groove and check that the casement closes with even pressure all round. If the opening still draughts after the swap, the pressure was never corrected — the new part is doing its job but the frame is not pressing it evenly, so the hinge side needs adjusting too.

Glass Unit Replacement and the One-Day Option

When only the glass is damaged we replace the glazed panel and keep the frame, and we can do an urgent swap within a single day for a cracked or misted pane. The panel is a sealed sandwich of panes with a spacer and desiccant between them; the casement and hardware stay in place, so the work is quieter and faster than a full change. A fogged panel means the seal between the panes has failed, so polishing the glass won't help — it has to come out even though it looks intact from the room. Cracked panes usually follow a knock or a thermal shock, and a misted one is a slow failure that shows up first at the edges.

How a Visit Runs from First Message to Final Check

A repair visit is short and predictable when the job is scoped before anyone arrives. Here is what happens between your first message and the moment the glazing is checked and closed.

The Free Measure and What the Measurer Decides

Measuring and consultation are free, and the measurer comes at a time that suits you to take sizes and help choose the fix, even if you haven't decided between repair and replacement yet. He checks the profile, the hinges and the seal line, notes which parts are worn and writes down the exact sash and frame dimensions. On a plastic unit that means the reinforcement inside the frame; on a wooden one it means the condition of the timber around the hinges. The measurer also picks the fasteners for your profile and floor — Z-brackets, plungers or magnets. His job is to confirm whether the frame is sound before quoting a repair, because a repair priced on a warped frame will not hold and wastes the visit.

How Long the Work Takes and Whether It Fits One Visit

Adjustment and seal work usually finish in a single trip, while a glass unit swap depends on the replacement being made to size, and an urgent pane can be ready within a day. Hinge adjustment and a new seal on two or three sashes take one call-out with the tools already in the van. The glazing is different: the old panel is measured, a fresh one is ordered to those dimensions, and the swap happens once it arrives. If the pane is cracked and the weather is against you, the urgent option shortens the wait to twenty-four hours. Booking the measure and the repair close together shortens the gap, because the sizes and the part are confirmed in one trip instead of two.

Seven Days a Week and a Fast Reply

We are open seven days a week and reply on WhatsApp within five minutes, so a weekend problem doesn't have to wait for Monday. A sash that stops closing on a Saturday evening is the same job as on a Tuesday morning — the schedule simply carries it. Send a photo of the faulty unit in the first message and we can tell you whether it is an adjustment or a glass unit before the visit, which sets the right expectation for the day. Send a photo of the faulty unit in the first message and we can tell you whether it is an adjustment or a glass unit before the visit, so the crew arrives with the right part already on board.

Warranty on the Repair and What It Covers

A repair is only as good as what happens if the problem returns. Here is what our cover includes, how long it runs and where it stops.

Twelve Months on Labour and Replaced Parts

Every repair we carry out comes with a twelve-month guarantee that includes both the labour and the parts we replaced, so a seal or hinge that fails early is our job to put right. That single term applies whether we changed a seal, swapped a hinge set or dealt with a draught along a whole sash — the clock runs from the day of the visit, not from the day of the first message. If the same fault comes back inside that period, we return and correct it at no charge, because the component and the work are treated as a single promise. Keep the order sheet from the visit — it lists the exact parts swapped, which is what a claim is checked against.

Three Years on a Glass Unit Swap

A replaced glass unit carries a three-year guarantee, longer than the repair itself, because a correctly made assembly should not mist or fail within that term. Glass is a sealed build, so a pane that clouds over inside the period is a manufacturing matter rather than wear, and the longer span reflects that difference. The same cover applies whether a single unit was swapped or several were changed in a visit, and urgent one-day replacements fall under it on identical terms. A misted pane inside the term usually points to a failed edge seal rather than the glass, so the claim is handled as a full replacement, not a polish.

What the Warranty Does Not Stretch To

A repair guarantee covers the work and the parts we supplied, not damage from a knock, a forced sash or a frame that was already failing when we arrived. A sash bent by a slammed door, a handle snapped by force or a profile cracked by impact sits outside the term, as does a fault on a component we never touched. If the frame was warped before the repair, the honest answer is that adjustment buys time but the structure is the real limit — no guarantee can fix a frame that has moved. A proper job comes with written cover on the parts, and a frame already out of true should be flagged before work starts rather than after.

Wooden, Aluminium and Plastic Windows We Take On

Most repair pages talk only about plastic. We work on plastic, wooden and aluminium units, and each material changes what a repair can realistically do.

Plastic Units and the Profiles Behind Them

Plastic units are the most common call, and because we change seals on any brand, a KBE, Rehau or VEKA unit gets the same repair as any other. The gasket swap is straightforward: we pull the old strip out of its groove, clean the channel and press in a new length cut to the profile geometry, so the sash closes against fresh rubber instead of a compressed one. Hinges, strikers and the tilt-and-turn mechanism then get adjusted, lubricated or replaced when a handle no longer catches. On PVC units the mechanism is the usual weak point, so a sash that drags is nearly always an adjustment rather than a structural problem. Check the handle and the sash corners first: if the geometry is square and the gap is even, the fix lives in the moving parts, not in the profile itself.

Wooden Units and What Repair Can Realistically Do

Wooden units can be repaired rather than only replaced, but the limit is the wood itself — a sound sash takes new seals and fittings, while rot or a twisted casing does not. On a healthy leaf the work is familiar: fresh gasket in the rebate, hinges cleaned and re-set, the sash re-hung so it meets the surround evenly along all four sides. Timber that has swollen, delaminated or gone soft at the sill is a different conversation, because new seals will not hold against material that keeps moving. On older wooden units the gasket and the fittings usually fail long before the wood does, so a repair often restores a unit that looks ready for the skip. Probe the sill and the bottom rail with a screwdriver before deciding — if the tip sinks in easily, the timber is past saving and a repair will not last the season.

Aluminium Units, Loggias and Unusual Openings

Aluminium units, loggia glazing, transoms and the openings on gazebos and verandas are all within scope, and the repair approach follows the frame rather than the material label. Slim aluminium profiles carry thinner seals and lighter fittings than PVC systems, so the same draught can come from a worn brush strip on a sliding leaf or a misaligned espagnolette on a casement. We take on the small stuff too — kitchen transoms, bathroom vents and the narrow openings above doors — because those are exactly the units that get ignored until they whistle. Aluminium moves less with temperature than plastic, so a draught on such a unit is more often a seal or hinge issue than a frame that has shifted. Ask for the leaf to be checked under load, with the unit shut and the wind on it, before anyone quotes for a full replacement.

Choosing a Direct Contractor Over a Middleman

Most repair listings in the city are directories and noticeboards, not the people who do the work. Here is how to tell a direct contractor from a middleman when you book.

Own Crews Versus a Listing Site

We work with our own crews rather than passing the job to a third party, so the person who measures the opening is accountable for the repair that follows. A directory can list a hundred companies and still send an unknown subcontractor who has never seen your profile or your floor. On a typical visit the same team measures the opening, notes the sash type and chooses the fasteners, then returns to fit them. That continuity matters on older wooden frames and on aluminium loggia openings, where a fix depends on what the measurer saw the first time. Ask who actually holds the warranty when you book anyone — a listing site rarely answers that directly.

Paying After the Work and a Fixed Price

You pay after the work is done, by cash, card or Kaspi, and the price is fixed in the order after measuring so it does not drift once the job starts. A price locked after the measure protects both sides — it fixes the scope ahead of the visit, so a surprise extra part is a conversation, not a bigger bill. The measurer records sizes and the parts the repair needs, and that record becomes the order you agree to. If a seal turns out to be worn beyond what was visible, we raise it with you before touching the frame. Paying on completion keeps the incentive where it belongs: the job is finished and checked before money changes hands.

Security Fittings for Homes with Children

We fit restrictors, blockers and locks, which matter most in homes with small children because a mosquito screen will not hold a child's weight. A restrictor that limits the opening to a few centimetres stops a fall without blocking ventilation, which is why it is the first fitting to add on any upper-floor sash. On tilt-and-turn sashes the blocker engages in the ventilation position, so the room still airs while the gap stays too narrow for a child to pass through. Locks are the third layer and suit ground-floor rooms where the point is keeping the sash shut rather than partly open. In flats above the first floor, add the restrictor at the same visit as the screen fitting, not months later.

Choosing a sash repair master wisely

Most problems trace back to a seal, a fitting or a single pane rather than the whole opening, so the decision rests on a clear diagnosis and a firm plan of work.

  • Draughts and dragging sashes: these point to worn seals or tired hardware, and a sound opening rarely needs full replacement to fix them.
  • Three core repairs: adjustment, seal renewal and a glazing swap cover most jobs, and each has a clear trigger that tells you which one applies.
  • Free measure first: a specialist checks whether the structure is sound before any repair is priced, so you agree the job on facts rather than guesswork.
  • Warranty coverage: protection should run on both labour and replaced parts, with a glazing swap backed longer than the repair itself.
  • Wood, aluminium and safety: wooden and aluminium units can be repaired, and restrictors are the first fitting to add in homes with children.

Questions about window repair in Atyrau

Repair or replacement, adjustment, mosquito screens, home visit by a technician

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Can a plastic window be repaired or is it easier to replace it entirely?

In most cases the window can be repaired: adjustment, replacement of the seal or hardware. A full replacement makes sense if the frame is damaged or its geometry is compromised. After inspection, the technician will tell you which option suits you.

02How can you tell that a window needs adjustment rather than just cleaning and lubrication?

If the sash catches on the frame, there is a draft around the perimeter, or the handle turns with effort, lubrication alone won't help. These signs indicate misalignment or worn parts. In that case, a technician is needed.

03Which mosquito screen canvas should I choose in Atyrau to keep dust out of the apartment in summer?

For a dusty climate, the Anti-Dust canvas with a fine mesh is the better choice: it traps fine dust and fluff. If you need maximum light and air, consider UltraVue, but it is less effective against dust.

04Can just the double glazing be replaced in an old frame, or does the whole window have to be changed?

The double glazing can be replaced separately without touching the frame and sash: the old unit is removed, a new one is installed and resealed around the perimeter. The frame is only replaced if the profile is damaged or its geometry is compromised.

05Are there technicians who come to your home and repair windows in one visit?

Yes, we provide home visits, and the technician determines the scope of repair after inspection. If parts need replacing, the technician brings them along, and complex cases are agreed in advance.

06Do you repair wooden windows or do technicians only work with plastic?

Yes, we also repair wooden windows: we replace seals, adjust sashes, and restore hardware. The scope of work depends on the condition of the frame and sashes; the technician will assess it on site.

Reviews of window repair in Atyrau

5,0based on 97 reviews on platforms
All reviews