Craftsman with a screwdriver by a window handle in a kitchen
from 6 600 ₸ per apartmentFull service for all windows, technician visit and on-site diagnosticsCalculate

Window Maintenance in Atyrau

Seasonal mode · winter-summer

Adjustment

Switching sashes to winter or summer mode, checking the seal pressure — from 3 000 ₸ per window

A technician holds an L-shaped steel hex key above the windowsill, a removed hinge cap lies next to it
GoogleYandex MapsZoon

5,097 reviews on review sites

What is window maintenance in Atyrau

In one visit, the technician checks and services one sash: pressure, hardware, seal and drainage

How the service works

Service is a set of works for caring for a PVC window: seasonal sash adjustment, cleaning and lubrication of hardware, seal treatment, cleaning of drainage channels. This care is carried out once a season so that the window closes tightly and does not let in draughts.

The service includes diagnostics of each unit: the technician checks the pressure, smooth operation of the handle, integrity of the rubber and free water drainage. Based on the inspection, they list the works and fix the price in the order.

A technician wiping the window frame by the handle in a kitchen
for the whole apartment

check the price list for cost

1 season

recommended care interval

4 units

hardware, seal, drainage, sash

Options
AdjustmentLubricationSealDrainageFull service

How care for plastic windows is performed

Four standard operations that cover the main window care tasks

Serviced window in a study, one handle on the sash
  • 01Pressure adjustment

    The technician moves the eccentrics and locking bolts to the strong or weak pressure position so that the sash closes tightly around the entire perimeter.

  • 02Cleaning and lubrication of hardware

    Old lubricant is removed, the mechanism is cleaned and new lubricant is applied — the sash moves smoothly, without squeaking.

  • 03Seal inspection

    The technician inspects the rubber around the sash and frame: assesses integrity, absence of tears and even pressure at the corners and sides.

  • 04Drainage cleaning

    Channels are cleared of dust and debris so water drains outside and does not pool in the profile.

Types of window service work

Five window elements that most often need attention during routine service

Hardware

Lubrication and adjustment

A technician holds window hardware parts: a corner hinge and a locking plate

Moving parts are cleaned and lubricated, and the smooth operation and sash seal are checked.

from 1 250 ₸/sash

Seal

Rubber care

A technician holds a small sponge with silicone lubricant for treating the window seal

The rubber is treated with silicone to keep it elastic and protect it from drying out.

from 750 ₸

Drainage

Channel cleaning

A technician holds a thin stiff wire for cleaning the drainage hole in the profile

Water drainage holes are cleared of dust so moisture does not accumulate.

per price list

Double glazing

Replacement if needed

Hands hold a glass unit with suction cups before installing it into a window

If the double glazing is damaged or fogs up from the inside, the technician will assess whether replacement is needed.

from 3 000 ₸

Handle and door

Replacement and adjustment

A technician holds a new white handle for a plastic window

The handle is replaced or the balcony door is adjusted so the mechanism works without effort.

from 2 750 ₸

Window maintenance prices in Atyrau

Price list for PVC window care with units of measurement

Type of workPrice
Full window servicefull scope of workfrom 10 000₸ per window
Window service for an apartmentall windowsfrom 6 600₸ per apartment
Seasonal winter-summer maintenancemode switchfrom 3 000₸ per window
Cleaning and lubrication of hardwarepreventive carefrom 1 250₸ per sash
Cleaning and lubrication of sealrubber carefrom 750₸ per linear m
Basic sash adjustment during servicingfixing misalignmentfrom 3 000₸ per sash
Balcony door adjustmentdoor blockfrom 6 000₸ per unit
Winter ventilation installationslot ventilationfrom 7 600₸ per unit
Thermal imaging inspection of windowsfinding heat leaksfrom 9 000₸ per job
Technician visit and inspectionwithout repair orderfrom 3 600₸ per job
Elimination of draughtspressure adjustmentfrom 3 500₸ per sash
Window handle replacementnew hardwarefrom 2 750₸ per unit

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card or Kaspi

Calculate the cost

Why customers order window service from us in Atyrau

Facts about the company that matter when choosing a window care technician

Repair warranty1 year

for work and replaced components

We workwithout days off

visit on a convenient day, including weekends

Paymentafter installation

cash, card or Kaspi

Pricefixed

in the order after measuring

Experiencesince 2012

we work across Kazakhstan

Coverage17 cities

of Kazakhstan, including Atyrau

Measuringfree

we service PVC, wood and aluminium windows in the cities where we operate

Windowsany brand

we service PVC, wood and aluminium

How window maintenance is carried out in Atyrau

Four steps from request to checking the result

  1. A hand holds a smartphone with a dark screen next to a white PVC window
    015 minutes

    Request

    You send a request via WhatsApp — we reply within 5 minutes and agree on a convenient time.

  2. A tape measure measures the window opening, a hand holds the measuring tape by a white window
    02on the visit day

    Diagnostics

    The technician inspects the windows, checks the hardware, seal and drainage, and lists the work needed.

  3. Hex keys and lubricant on a table
    03as planned

    Work

    Performs the agreed operations: adjustment, lubrication, seal treatment, cleaning.

  4. A serviced white window in a dining room, a table in the foreground
    04right away

    Check

    The technician shows and comments on the condition of each part after the work: hardware, seal, drainage and sash.

Good to know

Window Maintenance in Atyrau with a Free Measuring Visit

We handle window maintenance in Atyrau with our own fitters, not through middlemen. We start with a free measuring and diagnostic visit, fix the price in the order after measuring, and you pay only once the work is done. Window repair carries a 1-year warranty, glass unit replacement 3 years, and window installation 5 years.

How to Spot Window Maintenance Needs Before You Call Anyone

A window rarely fails all at once — it gives warning signs well in advance. Below are three groups of symptoms and how to tell a worn seal from a hardware fault or a failing glazed unit.

Three Symptoms That Point to Three Different Fixes

A draught usually means worn weatherstripping, a sash that catches the frame points to sagging hardware, and fogging between the panes means the glazed unit has lost its barrier. A draught felt along the closing line, especially on the windward side, comes from compressed or hardened weatherstripping that no longer presses against the frame. A leaf that scrapes the frame, drops at the handle corner or refuses to sit flush signals worn hinges and a mechanism out of adjustment. Fogging or a milky film trapped inside the double-glazed panel is a chamber failure — no amount of wiping helps because the moisture sits between the panes. Knowing these signs helps you plan window maintenance in Atyrau before a small fault grows.

Service Visit or Full Repair and Where the Line Sits

We treat adjustment, seal replacement and hardware tuning as maintenance, while a snapped hinge arm, a cracked pane or a failed glazed unit counts as repair. Maintenance covers what wears on schedule — weatherstripping, lubrication, sash alignment, handle and lock tuning — and we handle it under a one-year warranty covering both labour and replaced parts. Repair starts where a component has actually failed: a broken arm, a shattered pane or a sealed chamber that needs replacing, which we back with a three-year warranty on glass unit replacement. Most calls we get turn out to be maintenance, and catching a sash that no longer locks in the tilt position early keeps a small adjustment from turning into a hinge swap. In our practice, a maintenance visit in Atyrau called at the first scrape prevents a swap later.

What a Window Maintenance Visit Covers Step by Step

A maintenance visit is not a quick look and a verdict. It follows a fixed sequence, from the first measuring call to the final check, and some jobs need the sash lifted off.

From the Free Measuring Visit to the Final Check

  • Booking: we reply on WhatsApp within 5 minutes and agree a time that suits you, seven days a week.
  • Measuring: the specialist takes exact sizes, checks the profile, and helps pick mesh, frame colour and fixings.
  • Scope: he confirms on the spot whether the unit needs adjustment, a new seal or a replaced part.
  • Fixed price: the figure is locked in the order once sizes are taken, never guessed over the phone.
  • Payment: you settle after the work is done, by cash, card or Kaspi.

What the Fitter Does on Site and What Needs the Sash Removed

Adjustment, seal replacement and hardware tuning happen on site in one visit, while a glass unit swap or a hinge replacement may need the sash taken off the frame. The fitter checks the sash for square, cleans and lubricates the moving parts, sets the pressure of the locking points and tests the handle travel; worn weatherstripping is pulled out and refitted along the whole perimeter. A unit adjusted in place keeps the fit it had at installation, so we lift it off only when the hardware itself has failed — that keeps the visit short and the frame aligned as it was set. Swapping the glazing is the one job that always calls for removal, and the sash goes back on the same hinges with the same setting. Ask the fitter to show you the closing gap before he packs up.

How Often Window Maintenance in Atyrau Is Needed and Why Local Wind Matters

Windows here wear faster than in cities without constant wind and dust: particles work into the moving parts and seals dry out sooner. Below is a working schedule and the habits that stretch the time between visits.

A Practical Service Schedule for Local Conditions

  • Once a year: book a full check of hardware, seals and sash alignment on plastic, wooden and aluminium frames.
  • Before the heating season: have the weatherstripping and locking points inspected, since a dried-out seal lets draughts through.
  • After the dusty months: clean and lubricate tracks and hinges, as wind-blown grit grinds the mechanism with every turn.
  • In winter: we service glazing units in the cold months as well as in summer, so a stiff handle never waits for spring.
  • On a loggia or veranda: open structures collect grit faster, so they get a check twice a year.

Small Habits Between Visits That Keep Hardware Working

Wiping the hardware tracks, lubricating the moving parts and taking the framed mosquito screen off before winter are the three habits that delay the next service call the most. A soft brush or a vacuum nozzle clears grit from the rails in a couple of minutes, and a drop of silicone grease on the hinges and tilt mechanism keeps the handle turning without force. On a loggia, gazebo or veranda the same routine applies, though open structures collect more dust and deserve a check twice a year. A framed screen lifts out from inside in a minute, and removing it before the frost keeps gusts from loading the frame and stops particles from packing into the sash gap. Leave the mesh in place and the first hard gusts press it against the glass, so the lift-out habit protects both the screen and the sash.

Seals and Hardware on Windows of Any Brand

Weatherstripping and moving parts are the two components of a window that wear out first. Here is how to tell which one is failing, and why the brand on the frame never limits the fix.

How to Tell Worn Weatherstripping From a Hardware Fault

A gasket that has gone hard, flattened or pulls away from the rebate lets air through evenly along the gap, while a mechanical fault usually shows as a leaf that drops, catches or will not lock on one side. Run a hand along the closing edge on a windy day: a steady cold stream across the whole length points to the seal, a single draught near the corner points to a loose hinge. A panel that needs lifting to close, or a handle that turns stiffly, is a mechanism symptom and has nothing to do with the strip. Pressing a finger into it tells you a lot, because healthy weatherstripping springs back and a worn one stays compressed, which is the quickest test before you decide what to book.

Seal Replacement on KBE, Rehau, VEKA and Provedal Units

We replace weatherstripping on units of any manufacturer, including KBE, Rehau, VEKA and Provedal, and we tune the tilt-and-turn mechanism so the moving part locks in every position again. The work starts with the free measuring visit: the fitter picks the matching strip and checks the hinges, strikers and handle gear at the same time. Swapping the gasket is done on the spot with the panel still in place, and the adjustment follows right after. Matching the profile of the strip to the groove matters more than the brand stamped on the unit, so a correct fit brings back the airtight closure without touching the frame itself. If the tilt-and-turn gear has stopped latching, book the seal and the mechanism check together, since both are reached on the same visit.

Window Protection, Glass Units and the Warranty Behind the Work

Maintenance is not only about seals and hinges. Safety hardware and a clear guarantee on every job belong to the same visit, and both matter as much as the adjustment itself.

Restrictors, Locks and Glass Units as Part of the Service

We fit restrictors and locks so a sash opens only as far as you set it, and we replace glass units, including an urgent swap within one day. On a high floor the fitter picks the limiter by opening type and frame, and on tilt-and-turn sashes a lock stops the handle turning while the sash is tilted for air. A broken pane or a failed seal is measured and swapped in the same call, so the room is not left draughty between two visits. A restrictor set at the safe opening width limits how far the sash opens while still letting air in, which is why it belongs in the same visit as a hardware check rather than a separate call.

What Our Warranty Covers and How to Book

Terms for each type of completed work
WorkWarrantyWhat it covers
Repair1 yearLabour and replaced parts
Glass unit swap3 yearsThe new pane
Window fitting5 yearsFitting work

Window maintenance matched to your symptoms

A short recap of what decides whether a window keeps working quietly through the wind season and the dust that follows it.

  • Diagnose before you call: a draught, a stiff handle and a sagging sash are three different jobs, and each one has its own fix.
  • Service on the local rhythm: the wind and dust load sets the interval, so hardware and seals get checked sooner than in a sheltered inland block.
  • Seals are brand-agnostic: weatherstripping is replaced on KBE, Rehau, VEKA and Provedal sashes alike, matching the profile rather than the maker.
  • Protection belongs to the same visit: restrictors, locks and glass unit work are handled alongside maintenance, not as a separate errand.
  • Paperwork first: the scope and the warranty on labour and replaced parts are written into the order before the fitter starts.

Questions about window maintenance in Atyrau

Adjustment, seals, condensation, window wear

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01Is it worth adjusting a plastic window yourself or should you bring in a service technician?

You can handle minor adjustments to the pressure and hinges yourself if you have the tools and understand the hardware design. But if the sash is skewed or the seal is worn, it's better to call a technician: they will find the cause and adjust the window without risking damage to the mechanism.

02What should I do if the sash no longer closes tightly after winter?

First check if debris in the hardware is interfering and if the pressure setting has shifted: sometimes switching the window to winter mode helps. If the sash has sagged or catches on the frame, a technician needs to adjust it — the mechanism itself is usually intact.

03Can I have the seal replaced and the sash adjusted during a single window service visit?

Yes, these tasks are done in one visit: the technician first adjusts the pressure and hinges, then replaces the worn seal and lubricates the hardware. We replace seals in windows from any manufacturer, including KBE, Rehau, VEKA and Provedal.

04Why does the window fog up inside and will servicing help?

Most often the cause is improper pressure, clogged drainage or poor ventilation — in that case servicing and adjustment solve the problem. If moisture is trapped between the panes, the double glazing has lost its seal and will need to be replaced.

05Can a window be repaired without replacing the double glazing?

Yes, if the problem is in the hardware, seal or adjustment, the double glazing does not need to be replaced. Double glazing replacement is only required if it is damaged — cracks, loss of seal or persistent fogging inside that cannot be fixed by adjustment.

06Why do windows in Atyrau wear out faster due to dust and wind?

Dust and wind clog drainage channels and hardware, and temperature swings accelerate seal wear, so windows here need attention more often. Regular cleaning and lubrication of mechanisms extend service life and maintain tight sash pressure.

Reviews of window maintenance in Atyrau

5,0based on 97 reviews on platforms
All reviews