Craftsman by a window with new double-glazed units in the bedroom
from 1 300 ₸We quote the price after measuring and fix it in the order; you pay only once the unit is installed.Calculate

Double Glazing Replacement in Atyrau

Sun · Offices

Tinted glass

Reduces glare on monitors and hides the office from windows opposite. Film tinting costs from 5 500 ₸ per m².

A plastic window with gray tinted glass in a bright room
GoogleYandex MapsZoon

5,097 reviews on review sites

What is double glazing replacement in Atyrau

Damaged glass is replaced in the same sash. No need to install a new window, and you can choose a better unit right away.

Briefly about the work

The sash holds a ready-made unit of several panes assembled around the perimeter. If it has a chip, crack or scratches, the technician removes the glazing beads, takes out the unit and installs a new one made exactly to your window's dimensions.

In summer Atyrau has sun and heat, and in winter — wind, so many people choose coated glass or tinting when replacing. For kids' rooms and high floors we recommend laminated glass that does not shatter on impact.

Empty PVC window sash against the wall and removed glazing beads on the floor next to a balcony door
from 5 500 ₸

glass film tinting per square metre

3 years

warranty on the new unit and work

payment after

installation in cash, by card or Kaspi

Glass types
TintedLaminatedCoatedFrostedStandard

How glass replacement in the sash is performed in Atyrau

Four situations people in Atyrau come to us with.

A craftsman inserts a white glazing bead into the sash with a rubber mallet
  • 01Wanting safety

    We replace standard glass with laminated glass so that on impact shards do not fall into the room or outside.

  • 02Scratched glass

    After construction cleaning, scratches often remain on the glass; they cannot be polished out, and a new unit helps.

  • 03Chip during renovation

    It is best not to leave a damaged glass edge; temperature changes cause cracks to spread from it.

  • 04Cracked unit on the balcony

    Balcony glass suffers from heat and wind; we replace it without removing the frame or touching the finish.

Types of replacement units for your window

You can install the same unit or choose one that suits the room better: cooler, safer or hidden from view.

With coating

windows in the sun

White PVC window in a home office, a desk with a laptop and a lamp in the foreground

Energy-saving glass holds back some of the summer heat and keeps the room from overheating.

from 15 200 ₸/m²

Double-chamber

bedroom, living room

White PVC window in winter, a snowy courtyard outside, a floor lamp and a small table beside it

Three panes and two chambers for flats where warmth in winter and quiet matter.

from 20 000 ₸/m²

Single-chamber

unheated balcony

White PVC window in a dining room, with an oak table and chairs next to it

A lightweight unit with two panes for a balcony, veranda or utility room.

from 12 600 ₸/m²

Tinting

office, study

A plastic window with tinted glass, houses and mountains visible through the glass

The film cuts glare and hides the room from views from neighbouring windows.

from 5 500 ₸/m²

Security film

kids' room, ground floor

Hands apply a clear protective film to a window glass with a squeegee

The protective layer holds the shards if the glass is broken by a ball or a stone.

from 8 000 ₸/m²

Double glazing replacement prices in Atyrau

The price depends on the size and type of unit; we fix it in the order after a free measuring visit.

Type of workPrice
Double glazing replacement, per m²calculated by glass areafrom 19 500₸ per m²
Double-chamber double glazing replacementthree panesfrom 20 000₸ per m²
Single-chamber double glazing replacementtwo panesfrom 12 600₸ per m²
Energy-saving double glazingagainst summer heatfrom 15 200₸ per m²
Window film tintingoffices, sun-facing windowsfrom 5 500₸ per m²
Security film reinforcementprotection from shardsfrom 8 000₸ per m²
Broken glass replacementsingle panefrom 8 000₸ per m²
Glass replacement in a plastic doorbalcony doorsfrom 22 000₸ per m²
Additional glazing beads installationsecure fixingfrom 1 300₸ per item
Complex adjustment with sash removalif the sash has saggedfrom 4 000₸ per sash
Call-out and inspection by a technicianwithout ordering a replacementfrom 3 600₸ per job

The price is fixed in the order after measuringMeasuring and consultation are freePayment after installation: cash, card, Kaspi

Book a measuring visit

Why customers order a new unit from us in Atyrau

The terms we put in every order.

Warranty3 years

on the unit and installation, terms are written in the order

Paymentafter

installation, once you have checked the window: cash, card, Kaspi

Pricefixed

the amount after measuring does not change during the work

Measuringfree

the surveyor will come and help you choose the glass

Urgent replacement1 day

for broken windows, with a surcharge on the double glazing price

WhatsApp5 minutes

average response time to a question and photo

Weekno days off

we take requests every day

Experiencesince 2012

we work across Kazakhstan

How replacement of the unit is carried out at your home

From request to new glass — four steps.

  1. A hand holds a phone with a dark screen by a plastic window for measuring
    01reply in 5 minutes

    Request

    Send a photo of the damaged glass on WhatsApp and tell us what you want: strength, shade or just an intact window.

  2. A tape measure measures the sash opening of a white plastic window, only hands are visible
    02free

    Measuring

    The surveyor measures the glass, checks the profile and glazing beads, shows the options and gives the price.

  3. Hands assemble a glass unit from glass panes and an aluminum frame on a workbench
    03urgent — one day

    Production

    The unit is made to your dimensions; for urgent replacement we will make and install it within a day with a surcharge.

  4. A new glass unit is installed in a white plastic window sash, clean glass
    04payment after

    Installation

    The technician sets the unit on supports, fixes it with glazing beads and adjusts the sash, then you check the window.

Good to know

Double Glazing Replacement in Atyrau with a 3-Year Warranty

We handle double glazing replacement in Atyrau as a direct contractor with our own fitters. We start with a free measuring visit, replace only the sealed unit while your frame stays in place, and back the work with a 3-year warranty. Urgent units can be made and fitted within one day.

Telling a worn sealed unit apart from a tired seal in double glazing replacement or hardware

Draughts and fogging look like the same problem from inside a room, yet they rarely share a cause. Before ordering a replacement, it pays to establish what has actually failed in the window.

Condensation between the panes and what it actually means

Moisture trapped between the panes means the sealed glazing has lost its hermetic edge, and no amount of wiping will fix it. The desiccant strip inside the spacer absorbs residual humidity, and once the perimeter seal fails, outside air migrates into the cavity and the granules saturate within weeks. Water then beads on the inner faces, first as a faint haze near the spacer, later as visible droplets or a milky film that never clears. Fogging on the room side alone is usually a ventilation or humidity issue, so check airflow before assuming the glazing is gone. On the street-facing side, a single cold morning haze that disappears is normal. Our rule of thumb: if the mist sits between the layers and stays for days, the assembly is finished.

Draughts that come from the seal or the hardware, not the glass

When a window feels draughty but the panes are clear, we usually trace it to a compressed gasket or a sash that no longer pulls tight against the frame. A five-minute check with a sheet of paper trapped in the closed sash shows whether the leak sits at the gasket line or around the frame. Our technicians replace gaskets and adjust hardware on windows of any make, and if the assembly itself is sound, that repair is the cheaper answer. A draught that appears only on windy days points to a marginal gasket that wind pressure exposes, while a handle that turns without resistance means the leaf is not drawn in fully. Both are hardware adjustments, not a reason to order new glazing.

Replacing just the glass unit in double glazing replacement and keeping your existing frame

If the surround and profile still hold their geometry, there is no need to change the whole window — the sealed glazing usually fails long before the surround does.

When the surround is sound and only the glazing needs swapping

We replace the sealed glazing inside the existing frame without dismantling the window, so the profile, slopes and finish stay untouched. Our own fitters lift out the old glazing bead, measure the rebate, set the new unit on fresh setting blocks and refit the bead with new seals. The sash stays hung, the handles and hinges are never disturbed, and the wall junction is left exactly as it was. A full window swap means pulling the surround out of the opening, re-foaming and re-plastering the slopes — work that adds days and mess to a job that does not need it. Keeping the original surround also keeps the wall junction and insulation intact, which is where a full swap usually creates new weak points.

Plastic, wooden, aluminium, balcony and door units

Frame types and how each one is handled
Frame typeWhat we check firstTypical handling
Plastic (PVC)Bead condition, profile geometryStandard swap
WoodenBead type, frame drynessNew set of beads
AluminiumGlazing channel depthSlimmer build
Balcony or door panelHinge load, panel sizeReinforced build

How the measuring visit and the double glazing replacement run

Replacing a sealed unit is a short operation, yet the accuracy of the size and the right fixing decide how long it lasts. Here is what happens from the first visit to the finished work.

Why the free measuring visit comes before any order

We measure on site for free, because a double glazing replacement atyrau ordered from self-taken sizes is the most common reason a swap fails to seat properly. The measurer comes at a time that suits you, takes the exact width, height and depth of the aperture and confirms the bead and fixing type already on your window. He also helps you choose the build, so the new panel matches what the frame can carry. A millimetre read wrong at the sill or a fastener guessed from a photo shows up as a draught or a rattle within weeks. The measurer checks the rebate and fastener type, so the replacement arrives with the parts it actually needs rather than a generic kit, and the price is fixed in the order once those sizes are confirmed.

What happens on the day and how long you are without the window

  • Sill cleared: move pots, blinds and fragile items back from the aperture so the team has a clean working edge.
  • Old pane out: our fitters lift the failed glass from the existing frame, checking the bead and rebate as it comes away.
  • New panel in: the replacement is seated, packed and locked into the same surround without touching the walls.
  • Check and seal: the team tests the window, refits the trim and confirms the seal sits flush all round.
  • Handover: you inspect the finished work with the crew before anything is signed off.

Same-day replacement for a broken or failed unit

We can make and fit urgent glazing within one day, with a surcharge added to the price. A cracked pane, a misted panel or a broken seal after a gust off the river does not have to wait for a scheduled slot. Our own fitters carry the replacement through the same steps as a planned visit, so the surround and the room stay as they were. Same-day work depends on the build being available, so the earlier the sizes are confirmed, the more likely the one-day slot holds. If the glass is cracked, tape it on the inside and keep the room ventilated until the crew arrives.

Choosing a unit that suits Atyrau wind, dust and summer heat

A sealed unit here faces three jobs at once: hold out the steppe wind, keep fine grit from settling indoors, and stop a south-facing room turning into an oven in July. The build decides how well it copes.

Matching the unit build to wind, dust and heat

A build with a wider air gap and a low-emissivity coating handles heat and wind better than a basic double glazing, while tight edge sealing keeps grit out. The cavity is what slows warmth moving through the panes, and the coating reflects long-wave warmth back into the room in winter and outward in summer, so a south or west wall stops baking by mid-afternoon. Edge sealing matters just as much: a butyl primary layer plus a polysulphide secondary one holds the spacer rigid when gusts flex the sash, and a failed barrier lets the first grit and moisture in. On the windward side of a building, the frame and its gaskets do as much of the blocking work as the glazing, so the glazing choice and the gasket check belong together.

Noise, safety and which extra options are worth it

  • Laminated inner pane: a bonded plastic layer between the sheets damps traffic rumble and holds fragments if the pane cracks.
  • Wider air gap: a 16 mm cavity insulates better than a narrow one, useful on glazed balconies and large fixed panels.
  • Toughened outer pane: worth adding on ground-floor and low windows where an outside knock is realistic.
  • Fix the basics first: upgrades only pay off when the frame and gaskets are sound, so repair those before ordering better glass.

Warranty, payment and checking the finished job

Warranty terms and the payment order are the two things people check most carefully before placing an order, so we set both out clearly before any work starts.

What the 3-year warranty on replaced glazing covers

We give a 3-year warranty on glass unit replacement, covering both the glass itself and the fitting work. The seal between the panes, the spacer bar and the glazing bead all fall under it, and our own fitters return to put right anything that fails within that period. A failed seal shows up as haze or condensation trapped inside, and that is a warranty matter rather than a cleaning one. Damage from a crack in the outer pane or a knock during renovation is not covered, since it comes from impact rather than the build. A warranty is only as good as the record behind it, so keep the order sheet with the build and sizes written on it.

Checking the new glazing on the spot and paying after fitting

  • Clarity between the panes: look through against the light — any haze or trapped moisture means a failed seal and a swap.
  • Bead line: run a hand along the glazing bead on all four sides to confirm it sits flush.
  • Gasket and frame: check that the new gasket presses evenly and the sash opens without catching.
  • Payment: settle by cash, card or Kaspi once the checks are done and everything looks right.

When a sealed unit replacement is the right fix

Five points decide whether a double glazing job goes well, and each one is settled before the new pane set is ordered. Here is what to carry into the conversation.

  • Mist on the inside or a leaky seal: condensation between the panes means the sealed glass has failed, while a clear pane that still draughts points to the seal or the hardware.
  • Keep a sound frame: if the frame is solid, swapping only the glazing preserves the window, the slopes and the insulation around it.
  • Measure on site: the measuring visit confirms sizes, bead type and fixings, and that is what makes a replacement seat properly.
  • Match the build to the climate: wind, dust and summer heat shape the assembly, while noise and safety options are added once the basics are sound.
  • Protect both sides: a written warranty and a check of the fitted product before payment cover the buyer and the fitter alike.

Questions about double glazing replacement in Atyrau

Diagnostics, climate, installation, warranty

Konstantin SelenenkovKonstantin Selenenkovsenior mosquito screen specialist, 10 years in the trade

Online · replies within 5 minutes

Ask a question
01How can I tell if the double glazing needs replacing rather than the window being repaired?

If there is condensation, dust or a crack on the glass unit itself, repairing the frame and hardware won't help — replacement is needed. If there is draught along the sash or fogging on the outside, adjusting the window and replacing the seal is usually enough.

02Can double glazing be replaced in freezing cold or extreme heat?

Yes, replacement is possible at any time of year. In winter we work at temperatures not below minus 10–15 degrees, and in hot weather we try to install the unit in the morning to avoid overheating materials.

03Are energy-saving glass and argon in double glazing necessary in a hot climate?

Yes, such glass is useful in heat too: the coating reflects thermal radiation, helping keep the room cool. Argon enhances this effect and reduces the load on the air conditioner, but the final choice depends on the window and budget.

04How long does double glazing replacement take and do I need to clear the room?

Installing a new unit takes about an hour per sash. You don't need to completely clear the room, but it's better to remove fragile items from near the window and provide the installer with free access.

05What should I do if the double glazing cracks or breaks?

Tape over the crack so the shards don't fall out, and don't open the sash until the technician arrives. We can urgently manufacture and install a new unit within a day.

06What warranty do you provide for double glazing replacement?

We provide a 3-year warranty on double glazing replacement. It covers the unit's airtightness and installation quality, but does not cover mechanical damage after installation.

Reviews of double glazing replacement in Atyrau

5,0based on 97 reviews on platforms
All reviews